Good afternoon, everyone, and welcome to TSMC's Second Quarter 2022 Earnings Conference Call. This is Jeff Su, TSMC's Director of Investor Relations and your host for today.

To prevent the spread of COVID-19, TSMC is hosting our earnings conference call via live audio webcast through the company's website at www.tsmc.com, where you can also download the earnings release materials. If you are joining us through the conference call, your dial-in lines are in listen-only mode. The format for today's event will be as follows.

First, TSMC's Vice President and CFO, Mr. Wendell Huang, will summarize our operations in the second quarter 2022, followed by our guidance for the third quarter 2022. Afterwards, Mr. Huang and TSMC's CEO, Dr. C.C. Wei, will jointly provide the company's key messages. Then TSMC's Chairman, Dr.

Mark Liu, will host the Q&A session, where all three executives will entertain your questions.

As usual, I would like to remind everybody that today's discussions may contain forward-looking statements that are subject to significant risks and uncertainties which could cause actual results to differ materially from those contained in the forward-looking statements. Please refer to the safe harbor notice that appears on our press release.

And now I would like to turn the call over to TSMC's CFO, Mr. Wendell Huang, for the summary of operations and the current quarter guidance..

leadership technology development and ramp up, pricing, cost, capacity utilization, technology mix and foreign exchange rate. Compared to first quarter, our second quarter gross margin increased by 350 basis points sequentially to 59.1%, mainly due to a more favorable foreign exchange rate, cost improvement and value selling.

Compared to our second quarter guidance, our actual gross margins exceeded the high end of the range provided 3-month ago as our guidance was based on exchange rate assumption of $1 to TWD 28.8 whereas the actual second quarter exchange rate was $1 to TWD 29.42.

This created about 90 basis point difference in our actual second quarter gross margin versus our original guidance.

We have just guided our third quarter gross margin to decline 60 basis points sequentially to 58.5% at the midpoint, as a slightly more favorable exchange rate assumption will be more than offset by higher inflationary costs, including higher raw material and electricity costs.

Looking ahead on our profitability, we will face challenges from rising inflationary costs from raw materials, utilities and tools, increasing process complexity of leading nodes, new investments in mature nodes and overseas fab expansions.

Despite the manufacturing cost challenges, and excluding the impact of foreign exchange rate, of which we have no control over, taking the other 5 factors into consideration, we continue to believe a long-term gross margin of 53% and higher is achievable. Next, let me talk about our effective tax rate.

For 2022, we expect our tax rate to be between 10% and 11%. Starting in 2023, we will see the expiration of certain tax exemptions in Taiwan, and our effective tax rate will increase. However, Taiwan government is in the process of drafting certain new tax exemption regulations and is currently in the common period.

Therefore, we will provide a further update on the outlook of our tax rate in 2023 and beyond when more details become available. Now let me turn the microphone over to C.C..

Thank you, Wendell. We hope everybody is staying safe and healthy during this time. First, let me start with our near-term growth outlook. We concluded our second quarter with revenue of TWD 534 billion or $18.2 billion, supported by HPC, IoT and automotive-related demand.

Moving into third quarter 2022, we expect our business to be supported by continued demand for our industry-leading 5-nanometer and 7-nanometer technologies.

On the inventory side, due to the softening device momentum in smartphone, PC and consumer end market segments, we observe the supply chain is already taking action and expect inventory level to reduce throughout the second half 2022. After two years of pandemic-driven stay to home demand, and this type of adjustment is reasonable, in our view.

Our expectation is for the excess inventory in the semiconductor supply chain to take a few quarters to rebalance to a healthier level. We believe the current semiconductor cycle will be more similar to a typical cycle, with a few quarters of inventory adjustment likely through first half 2023.

We have also internally modeled and prepared ourselves for various different scenarios in case it is necessary. On the demand side, while we observe softness in consumer end market segment, the end market segments such as data center and automotive-related remains steady. And we are able to reallocate our capacity to support these areas.

Despite the ongoing inventory correction, our customers' demand continues to exceed our ability to supply. We expect our capacity to remain tight throughout 2022 and our full year growth to be mid-30% in U.S. dollar terms.

Three key factor in supporting TSMC's strong structural demand are our technology leadership and differentiation, our strong portfolio in high-performance computing and our strategic relationship with customers. All of these factors are TSMC's strength in the foundry industry.

First, on technology leadership and differentiation, TSMC's technology position is much stronger today as compared to previous years.

Looking ahead to 2023, we are working diligently to provide the industry most advanced technologies and making it available to all the product innovators with the successful ramp of N5, N4P, N4X and the upcoming ramp-up of N3, we will expand our customer product portfolio and increase our addressable market.

The macroeconomic uncertainty may persist into 2023. Our technology leadership will continue to advance and support our growth.

Secondly, the massive structural increase in the demand of computation, underpinned by the industry megatrend, continues to fill greater need for performance and energy-efficient computing, which require use of leading-edge technologies.

Through our comprehensive IP ecosystem and optimized process technology, we are able to address and capture the structural demand and build a strong portfolio in high-performance computing. We expect HPC to be the main engine of TSMC's long-term growth and the largest contributor in terms of our incremental revenue growth in the next several years.

Third, our strategic relationship with our customers are long-term in nature, developed and built through many years of collaboration and investment to enable customers' success in the high-end market. We continue to work closely with our customer and technology development, capacity planning and pricing to support their long-term demand and growth.

With all these three differentiating factors, we expect our capacity utilization to remain healthy in 2023. And our business to be less volatile and more resilient, supported by the strong demand for our differentiated and leading advanced and specialty technologies. Now let me talk about TSMC's long-term growth outlook.

While macroeconomic headwinds bring near-term uncertainties that may persist, we believe the fundamental structural growth trajectory in the long-term semiconductor demand remains firmly in place. We continue to observe silicon content increase across many end devices, fueled by process technology migration and increased functionality.

For example, the number of CPUs, GPUs and AI accelerators in the data center are increasing. 5G smartphone carries substantially higher silicon content as compared to 4G smartphone. The amount of silicon content in today's car continue to rise.

While the device unit growth of many electronics device may be flattish to low single-digit percentage range, in the next several years, the silicon content growth will be higher, in the mid- to high single-digit percentage range and support the long-term structural semiconductor demand and increase our addressable wafer demand.

TSMC's CapEx and capacity planning are always based on the long-term structural market demand profile, not near-term factors. We are working closely with our customer to plan our long-term capacity and investing in leading edge and specialty technology to support their growth.

We will manage our business prudently through the near-term uncertainties, and we remain highly confident in our long-term growth outlook.

With our technology leadership, manufacturing and capacity support and customers trust, TSMC is well positioned to capture the strong multiyear growth from the favorable structural megatrend of 5G and HPC related applications and deliver profitable growth for our shareholders.

We reiterate our long-term revenue to be between 15 and 20 CAGR over the next several years in U.S. dollar terms. Next, let me talk about the tool delivery update. As a major player in the global semiconductor supply chain, TSMC work closely with all our tool supplier to plan our CapEx and capacity in advance.

However, like many other industries, our suppliers have been facing greater challenges in their supply chains, which are extending toward delivery lead times for both advanced and mature nodes. As a result, we expect some of our CapEx this year to be pushed out into 2023.

TSMC is actively doing its part to help our tool suppliers address the supply chain challenges. In April, we said that we have increased regular high-level communications to trace the progress and send several teams on site to support our suppliers. Since then, we have worked closely to identify critical chips that are gauging toward delivery.

We are working dynamically with our customers and prioritize our wafer capacity to support these critical chips to help mitigate the chip constant issues. While challenges remain, the situation is improving. We do not expect any impact to our 2022 capacity plan.

And we are able to put in the delivery schedule for certain amount of tools for our 2023 capacity. We have been working closely with our customer for 2023 so that we can support their demand. Now let me talk about the N3 and N3 status. Our N3 is on track for volume production in second half of this year, fiscal year.

We expect revenue contribution starting first half of 2023, with a smooth ramp in 2023, driven by both HPC and smartphone applications. N3 will further extend our N3 family with the enhanced performance, power and yield. N3 will offer complete platform support for both smartphone and HPC applications.

We observed a high level of customer engagement at N3. And volume production is scheduled for around one year after N3. Our 3-nanometer technology will be the most advanced semiconductor technology in both PPA and transistor technology when it is introduced. Thus, we are confident that our N3 family will be another large and long-lasting node for TSMC.

Finally, let me talk about the N2 status. Our N2 technology development is on track and progressing well to our expectation, with risk production schedule in 2024 and volume production in 2025.

After careful evaluation and extensive period of development, our 2-nanometer technology will adopt the narrow sea transistor structure to provide our customers with the best performance, cost and technology maturity.

N2 deliver full node performance and power benefited to address the increasing need for energy-efficient computing, with 10 to 15 speed improvement at the same power or 20% to 30% power improvement at the same speed and larger density of more than 20% increase as compared with N3E.

Our 2-nanometer technology will be the most advanced semiconductor technology in the industry in both density and energy-efficient when it is introduced and will further extend our leadership position well into the future. This concludes our key message, and thank you for your attention..

Thank you, C.C. This concludes our prepared remarks. Now let's begin the Q&A session. Our Chairman, Dr. Mark Liu, will be the host. .

Hello, everyone. Thank you for coming to this conference. I wish you all healthy and well. I think the -- we hope the above reports already answered some of your question, but it definitely shows we -- this company stands on firm ground. And we will be prepared prudently going through this near-term uncertainty.

In the meantime, we will be also confident and well prepared for our next growth period. So now the floor is open for your question..

Thank you, Chairman. Operator, please proceed with the first caller on the line. .

The first one to ask question, Randy Abrams, Credit Suisse..

Thank you. Congratulations on the good outlook. My first question, I wanted to ask on your view on the business cycle. You raised your outlook to 35% in the strong third quarter.

Could -- with that strong outlook, I wanted to see what is driving your expectation for inventory drawdown in second half? And how broad you're seeing the inventory drawdown? And the follow-up question I wanted to ask to that is, what is your view on the first half? With your view customers will be drawing down through the first half, do you see underutilization? And how severe do you expect that correction?.

Okay. Randy, please allow me to summarize your first question. So I think, Randy, the first part -- his first question is in looking at TSMC's third quarter guidance and also looking at our full year growth to be mid-30s.

He's wondering, I believe, Randy, how to reconcile this with our expectation of the inventory adjustment in the second half and also into the first half next year.

So how do we reconcile our view on the inventory cycle against our own business? Is that correct, Randy?.

Yes. That's correct. Just an initial view on first half.

How much correction you're aiming for in your business?.

Randy, this is C.C. Wei. Let me answer your question. Yes, we do have mid-30s growth in this year. But we also expect our customers start to take action to decrease their inventory level. How far? We expect that a few quarters, at least into the first half of 2023, they will continue to do the inventory correction.

And the awarded to TSMC's evaluation, let me say that despite ongoing inventory adjustment and macro uncertainties, the structural growth trajectory in the long-term semiconductor demand remained firm.

With our leading and differentiated advance and specialty technologies and a strong HPC portfolio and strategic customer relationships, we expect our capacity remain tight and our business to be more resilient. And we are confident in both our near-term and long-term growth outlook.

Did that answer your question?.

Yes.

I mean, to clarify, do you expect even through first half to remain tight, factoring in your tech position and some of the projects you have?.

Yes. You remain..

So I think Randy wants to ask, in the first half of next year, do we expect -- how do we see our capacity utilization given the ongoing inventory adjustment?.

I cannot give you exactly the number that we are talking about, but let me say, it's hearsay. Okay..

Okay. Great. My second question, on the CapEx, two parts. Just want to understand the push-outs, a little more what it's affecting the 3-nanometer. How much ramp the 5-nanometer or mature nodes? And if you could also discuss the framework for next year's CapEx. I think you've made comments about we could be above TWD 40 billion.

If you could give a framework for how you're thinking about next year CapEx..

Okay. So Randy's second question is on the CapEx. He wants to know, with some of the tool delivery issues, the CapEx pushout, is this more for 3-nanometer? Is this for 5-nanometer? Or is this more on the mature node side? And he also wants to know how does this impact our CapEx for 2023. As we said before, that 2023 could be TWD 40 billion or higher..

Okay. Randy, this is Wendell. The first question, as C.C. said in his prepared remarks that the schedule, the tool delivery schedule changes currently as in both the advance and the mature nodes. Okay. And your second question is about next year's CapEx. It's too early to talk about next year's CapEx.

But as we always said, we invest the CapEx in the year for the future opportunities. So as long as the outlook, the future outlook is good, we will continue to invest, but of course, in a disciplined manner..

Okay. And just for this year, with the pushout, what's your expectation for how much this year would be? And that's my final question. Thank you..

I think next year will be too early. But I can tell you that this year, it will be closer to the lower end of our previous guidance..

So closer to the lower end of the guidance of TWD 40 billion to TWD 44 billion, Randy. Okay. Great, thank you. Operator can we move onto the next participant please..

Next one to ask questions is Bruce Lu from Goldman Sachs..

Hi, thank you for taking my question. Congrats on the great result. I think I may say that the next few years, the revenue growth will still at the 15% to 20% growth, and it is driven by the compound -- dollar content growth.

Can you -- this is actually the most difficult part for the investor or the biggest discrepancy when we talk to the investor, how much is driven by the dollar content growth? Because investors do not really see the die fab side.

So for example, by 50% to 20% growth for the next few years, how much is driven by dollar content growth? How much is driven by shipment? Or how much driven by the ASP or product mix improvement?.

Okay. Let me -- Bruce, thank you. Let me summarize your first question. So Bruce is really looking at our long-term growth. We said that between -- we will grow between 15% to 20% CAGR in the next several years.

He wants to know, out of this 15% to 20%, how much is driven by silicon content? How much is driven by, Bruce, I think you said shipment? How much is driven by ASP?.

Bruce, let me answer the question. But exactly the number, I cannot share with you because it's confidential. But let me say that. The content increase actually is at least mid- to high single digit for our edge devices. And then even all the electronics devices, even the growth is flattish or some kind of a low single-digit. It's still growing.

It’s still growing. And combined with all these and our value selling with our customer, so we are confident to say 15% to 20% CAGR is achievable. Okay..

Okay, thank you. So to my next question is for the mature node and the specialty capacity expansion. I think Chairman recently commented that you will expand your mature node that specialized capacity by 50%, 50, in the next three years. I mean, this number looks a bit big.

I mean can you tell us how do you achieve this 50% capacity expansion by the new capacity or conversion? And where are those demand? How do you see the mature node supply and the demand in the coming few years?.

Okay. Bruce, let me summarize your second question, please. All right. So Bruce's second question is on mature node and specialty capacity expansion. He is looking to say TSMC expanding our mature node specialty capacity by 50%. That looks very big.

Is that all new capacity expansion? Is some of this also coming from logic conversion to specialty? And then also, what applications are driving this?.

Well, let me answer the question. 50% increase, we mean that 50% is in specialty technologies capacity. It doesn't mean the overall capacity increase. Okay. We did this because of our customers' need, and we work closely to support the growth. So it's not a 50% increase in the logic capacity, no. it's specialties..

And if I may add a little bit. The expansion also includes both the new capacity and conversion of existing capacity..

So how confident you are, I mean, in terms of this kind of capacity expansion, what kind of application which will keep you confident for this kind of increase? So because in the past like 20 years, your capacity expansion is mostly in the advanced node?.

So Bruce wants to know what is keeping TSMC confident to have such expansion on the specialty technologies as most of our expansion in the past has been focused on the advanced nodes..

Bruce, you are right. In the past years, TSMC always increased the leading-edge capacity. We did not increase any specialties in the past few years, except a few upgrade from logical to specialty. But this time, it's different. First, because we can see the silicon content continue to increase on all the edge devices.

It's not -- it's included on the demand on the leading-edge capacity. It also requires the specialties content inside. And so at the urge of our customers' request, TSMC closely work with our customer and to expand our specialty capacities. Okay. How confident? Very, very confident..

I believe. So, thank you..

Thank you, Bruce. Operator can we move on to the next participant, please. .

Next one to ask question, Sunny Lin from UBS..

Hi, good afternoon. Thank you for taking my questions, and congrats on the strong results. So my first question is on the semi cycle earlier, that you have done some scenario analysis on the semi cycle for 2023. So I just wonder what your current base case for semi growth for 2023.

Do you think it will be like a typical down cycle like in 2015, 2019? Or would it be a more meaningful correction? Thank you..

Okay. Sunny, thank you. Sunny's first question is on the semiconductor cycle. She wants to know what is TSMC's base case for 2023. Do we think it will be more of a typical cycle such as in 2015 or 2019? Or it will be more of a meaningful correction, I believe, are her words..

Yes. Sunny, yes, our base case is a typical -- more of a typical down cycle. The inventory correction maybe go for a few quarters, through the first half of 2023. It's not like a big down cycle back in 2008 or something like that..

Got it. Thank you. And so my second question is on 3-nanometer.

As we are ramping up the technology in second half, how should we think about the revenue contribution into 2023? In terms of profitability, will the 3-nanometer ramp-up have any impact into Q4 or if the impact will be mostly from Q1 next year?.

Okay. And so thank you, Sunny. So Sunny's second question is on 3-nanometer. With the ramp, she wants to know what type of revenue contribution from N3 in 2023. And also, with the ramp of N3, what would be the impact to profitability? When should we see it? And what type of impact from N3. Thank you. That's correct.

Right, Sunny?.

That's right. Thank you, Jeff..

Sure..

Okay, Sunny. In terms of revenue contribution from N3, I have to say that nowadays, it's less meaningful to talk about the revenue contribution of a leading node at the very beginning when we start to ramp it compared to the -- in the past because the total pie is increasing and we believe it will continue to increase.

Dollar amount-wise, it's certainly bigger than the previous nodes at the very beginning stage. This is your first question. In terms of profitability dilution, we expect that it will impact between 2 to 3 percentage points in gross margins in 20 -- in the first year, 2023. Thank you..

Got it. Thank you. That’s very clear. Thank you very much. .

Thank you, Sunny. Operator can we move on to the next participant, please. .

Now let's turn for Gokul Hariharan, JPMorgan. Go ahead, please. .

Gokul, are you on the line. You might have to unmute. .

Sorry. My first question is on the....

Gokul, sorry, you're breaking up. Can you try again? Repeat your question, please..

Yes. Sure. My first question, inventory cycle..

Gokul, so sorry. Okay. Let's try one more time because you continue to break up. Let's try one more time. If not, I will have to ask you to dial back in. Sorry. Please repeat your question again..

Sure.

Can you hear me now?.

Yes..

Okay. My first is investor's impact.

Could you talk to what is your expectation?.

Okay. Gokul, I'm sorry. I'm sorry. Your line is very unstable. So I will ask you to please try to get back into the queue, and we'll address your question. Okay? Operator can we move on to the next caller please. Apologize for that. .

Next one to ask question, Brett Simpson, Arete Research..

Yes, thanks very much. I had a question on the inventory burden off that you were signaling potentially for first half '23.

Can you talk more broadly about fabless days of inventory today and how you see this trending in the second half of the year? And then in terms of your outlook for the overall semi industry, what is your current view for 2022 growth and 2023 growth? And has your view changed in the last three months? Thank you..

Okay. Thank you, Brett. So Brett's first question is looking at inventory and the overall industry. So his first question is about the inventory adjustment. We have said that it will likely be through first half 2023.

So what do we see for the fabless DOI trending in second half of this year?.

Yes. Yes, Brett. We expect the fabless DOI to come down in the second half of the year gradually.

And your second question?.

Come down throughout second half of this year. Correct..

Yes, yes..

And then the second part of this question is -- Brett, sorry, again, your second part is looking at the industry, what is our current view on the semiconductor industry for 2022 and 2023? And how has our forecast changed or not?.

That's right..

Well, let me answer the question. Our forecast for the semiconductor exclude memory and the forecast on the foundry growth in 2022 remain the same as we projected earlier. For 2023, it's too early to forecast. But as we said, the inventory correction will continue to go on.

And for TSMC, because our technology position is much stronger today and we also have a very strong portfolio in HPC and we have a long-term strategic relationship with customer, so we see 2023, even just inventory correction, is still a growth year for TSMC..

Okay.

Jeff, can I just have a second question? Is that possible?.

Sure. One more second question. Yes..

So we've been hearing from some other leading-edge chip manufacturers that they are looking at the opportunity to work with project financing companies when it comes to new fab builds. I think companies like Brookfield has been mentioned.

How does TSMC view this trend? And is there a fab rental model or a way to reduce the free cash flow burden in this industry as you bring on new fabs? Thank you..

All right. So Brett second question is, he wants to know what is TSMC's view. His observation is other companies in the industry are using project financing to build new fabs, this new fab rental model.

So what is TSMC's view on this?.

Brett, we are not considering project financing now. Normally, project financing entails stringent, stricter terms and higher costs. We will finance the expansion mainly from our operating cash flow and borrowing using our strong balance sheet. That's our current policy..

Right. Thank you..

Alright operator, let’s move on to the next participant, please. .

Next one to ask question, Charlie Chan from Morgan Stanley.

Hello, good afternoon. And also, congratulations for great results. So my first question is about your HPC and smartphone demand, because our view is that the macro slowdown or recession should impact the core CapEx and the consumption.

So management, do you think that the so-called inventory digestion will sooner later apply to your data center same customers and the high-end smartphone customers order in the coming quarters? Thank you..

Okay. So Charlie's first question is looking at the inventory adjustment in light of the macro slowdown.

He wants to know, do we believe or see impact to cloud service provider CapEx or high-end smartphone sort of to have inventory adjustment next? Is that correct, Charlie?.

Yes. Thank you, Jeff..

Charlie, this is C.C. Wei. I think to answer your question, you might think they have too much of inventory in the HPC area. But as we said, that in our life, there are so many edge devices continue to create data. And those data need to be processed.

And with sufficient speed and efficient power consumption, and that require our leading-edge technology to provide the solution. So even the inventory correction or something like that, we expect our business to be less volatile and more resilience through the near-term uncertainties. And also, we are highly confident in our long-term growth outlook..

Yes, yes. So how about the high-end smartphone inventory correction? Do you expect that top brand inventory -- smartphone inventory to see correction as well on the semiconductor demand? Thank you..

So Charlie also wants to know, do we expect high-end smartphone inventory correction on the semi demand?.

To be frank with you, we did not see too much of inventory on the high-end smartphone buildup. So no..

Okay. Great. That's very helpful. And my second question is about your future technology demand installment. So either Mark or C.C., can you please help me. So this is the first time you've disclosed the N2 DAA large density improvement. I think more than 20% large density increase still better than market share.

But compared to the previous node, there's a significant slowdown. So do you think -- first of all, N2 is a full node migration. And do you think that there is a kind of a significant slowdown of more slow? And what does that mean to your CapEx per k for N2 versus N3? And lastly, backside power via.

So I'm very interested in your kind of N2, what it means to your long-term technology and also CapEx. Thank you..

Okay. Maybe I'll summarize Charlie's second question into through different parts. His first question is on N2 Technology. And he notes that the logic density gain is more than 20%. But does this represent a significant slowdown, especially in the context of Moore's Law? And what does this mean for technology as a whole? Maybe Chairman can address..

Let me answer your question. First of all, C.C. just mentioned, our N2 will be the most advanced semiconductor technology in the industry when it is introduced, because this technology, we work closely with our customers, and about -- regarding the scaling factor included.

But Charlie, we -- from now on, we have to look at the technology in a platform fashion. The N2 technology is not just the wafer scaling. The N2 technology include transistor scaling, but also include the new power line structure and also include a new chiplet technology to allow the more architectural innovation in our customers.

So this is a whole set of technology offering composed to be N2 nanometer. The scaling factor is smaller, but we really know the customers' needs is -- today is really about the power efficiency. And this will be a full node power efficiency migration.

And to control the cost, that is the reason we control the scaling factor while maintain the same value for the new generation of technology. So that's my report, yes..

Great. And also Charlie is asking about the backside power on N2..

Okay. Let me add some viewpoint. On the backside power delivery, actually, we call the super power rail is part of our N2 platform offering. And at the proper time, who are introduced to the market whenever our customer need it..

Yes. So if you put that together, right, it seems like lower -- you have this power via -- what does that mean to your CapEx burden in the coming years? Thank you very much..

Yes. Okay, thank you, Charlie. Operator can we move on to the next participant, please..

Next one to ask questions, Laura Chen from KGI Group..

Thank you for taking my questions. And congrats for the good result. My first question is about your view on the key applications. Actually, starting from the last quarter, we already see that high computing PC has been the key categories for TSMC.

So I'm just wondering your view from various architecture, like on base or X86, can we share with our view that what will be the key driver for TSMC for the next few years? Do you see that will more from the on-base CPU or more upside from the X86? And also, on the smartphone space, I recall that in the previous analyst call, you mentioned that penetration rate for the on 5G, you expect there will be about like 50%.

But given the weak demand growth, well, what's your latest view on the 5G smartphone penetration? That's my first question. Thanks..

Okay. So Laura's first question. First, she wants to know on HPC. She notes HPC has become the largest contributor by platform to our revenue. So she wants to know what -- when we look out over the next several years, how do we see HPC? Is this driven by ARM-based or versus x86. I think that's the first part of her first question..

Laura, our HPC definitely is growing here. And since TSMC, everybody's foundry. So we support both X86 and ARM based for what you say for the high-performance computing, both. And both are significantly growing in TSMC..

And then she also wants to -- sorry?.

Yes. It seems like TSMC already has a very high exposure on the ARM base.

So can we expect the next few years still a growth driver to more come from the X86?.

Can I answer this question? We have very high exposure to X86 also..

But Laura, I think we have said numerous times and it still remains holds true that HPC will be the largest contributor and increasingly the main driver of TSMC's growth over the next several years..

Yes. And Laura, your second question is the 5G smartphone penetration rate. We're still working at about 50% at this moment..

Okay, thank you. And if I can add the second question about the gross margin outlook. I think 59% is really amazing.

And considering your CapEx discipline and the consistent delivery in advanced node or maybe price hike as well, can we expect that will have more upside to your current 53% gross margin target?.

So Laura’s, second question is on the gross margin. She notes that gross margin for second quarter, 59.1%, is very high.

So is there an upside to our long-term gross margin target of 53% and higher?.

Laura, as we mentioned before, there are 6 factors that affect our profitability every year. Excluding the foreign exchange rate, of which we do not have any control on, the other factors taking into consideration, we are confident that a long-term gross margin of 53% and higher is achievable.

And we certainly -- we'll try to work hard to deliver better than that..

Okay, thank you very much. That’s very helpful..

Okay, thank you. Operator can we move on the next participant please. .

Next one, we have Gokul Hariharan from JPMorgan..

Thanks. Let me try again. My first question is on the U.S. expansion. There's been a lot of commentary around very high cost for U.S. expansion. I think Founder Chairman -- the U.S. perhaps compared to Taiwan. Could you talk a little bit about the U.S.

expansion and how they are going? What kind of cost differential is TSMC seeing? And what is your negotiations with the Arizona government solar customers in terms of filling up the cost differential? That's my first..

Okay. Gokul, I have to say again, you're breaking in and out. Let me try to summarize your question, make sure I -- we got it right. So Gokul's first question is about our U.S. fab. He notes that the cost is higher. Our founder has recently said this as well.

So Gokul, I think your question, again, you broke up, but I think your question is about how do we manage the -- how will we manage the cost gap and close the cost gap? Is that your question?.

Yes.

What is your discussions and negotiation with customers and governments regarding higher cost as well as subsidies?.

So okay. Thank you, Gokul.

So Gokul wants to know, with the higher cost, how our negotiations and discussions with governments? How our negotiations and discussions with customers about this cost differential?.

Okay. Gokul, yes. Yes, I did mention that the cost in the fab in the U.S. is higher than we expected. We are still in the construction stage of the fab. And during this past two years, we found that the labor cost in the States is higher than we planned. And also, some of the COVID supply chain interruption also was an unexpected.

And we did confer this information to the government at the location, give them a full perspective of the cost gap. But Gokul, is indeed the -- our customer in U.S., they all want to load that fab. I mean, this is the needs from our customers. And we also believe there is ample -- amplify our business opportunity at there.

So the cost is increasing, but cost is not the only factors. And we are still working on the government subsidy and we'll continue working on the cost reduction. And every company have different ways to reduce the cost. So that is the work in the process..

Thank you, thank you very much. My second question, would the TSMC consider any kind of a joint venture fab in the U.S. with potential large customers? Historically, TSMC has done this with some of the customers like Altera and NXP long back. Would you consider any kind of joint venture fabs potentially with any of the customers in the U.S.

if the outsourcing opportunity big enough? Thank you..

Okay. So Gokul's second question is, again, would TSMC consider any type of joint venture fab in the U.S. for outsourcing? He notes we have done certain JVs in the past. So is this something we will consider in the U.S.

for outsourcing opportunities?.

Yes. Let me answer this question again. This -- our -- yes, TSMC indeed has some joint venture arrangement maybe 20 years ago within U.S. But right now, we understand -- with that experience, we understand, our customers' demand will go up and down. And we don't -- and also, we don't want to limit this fab into a specific set of customers.

It's open to the RO customer base to utilize. So no, at this point, we do not plan to have a joint venture arrangement in the U.S..

Okay, Gokul. Operator -- okay, thank you Gokul. Operator can we move on to the next participant, please. .

Next one to ask question, Charles Shi from Needham and Company..

Yes, good afternoon. Thank you for taking my question. I want to go back, a quick clarification about N3 gross margin. You kind of mentioned probably first time quantified how much dilution that you're expecting, 2% to 3%.

Can you let us know dilution relative to which number because there is one long-term gross margin number to see, 3% and higher, and there is another one which is where your gross margin is tracking? That's a few points above your long-term target. This is kind of a little bit moving target here. So can you clarify with us? Thank you..

So Charles is asking if we can clarify our gross margin target. His question, well, I think, again, when we talk about N3 diluting 2% to 3%, it is for the first year, by which is 2023.

And so he's wondering I think, Charles, your question is, does this dilution continue? Does this change our long-term gross margin target? And more -- maybe more, I think he is thinking about what are the gross -- yes, sorry, let me stop there.

Is that your question, Charles?.

No, no, no. The 2% to 3% dilution relative to what, is my question.

Is it relative to your long-term growth target, 2% to 3% and higher, or where you're tracking, which is 59%, 58%, yes, that's my question?.

Thank you, Charles.

So Charles is asking, when we talk about 2% to 3% dilution, are we looking at 53% diluting from there? Or are we looking at 59% diluting from here?.

Charles, it's diluting from next year's gross margin as we forecast. It's neither 53% nor 59%. Bear in mind that when we talk about 53% and higher, it already included the dilution effects from the N3 dilutions..

Okay, Charles? Do you have a second question?.

I do. I have a more long-term question. Thank you, Chairman, for mentioning N2 package, which that includes chiplets. I want to specifically ask you about chiplets. I think you recently talked about expanding SOIC capacity by 20 times through 2026. That's quite a big amount of capacity application.

I think one year ago, you sort of mentioned SOIC is something you're targeting for high-performance computing application. But given the amount of capacity increases you're planning, any updated thoughts on whether that can be a technology possibly at N2 to use for smartphone platform? Any other color you can give us would be great. Thank you..

Okay. Thank you, Charles. So Charles second question is on 3D IC. He notes that, in particular, we have talking about SOIC and also expanding the capacity there. We have said in the past, this is primarily adopted by HPC applications.

His question is, with such capacity expansion, do we also expect smartphone customers to adopt 3D IC solutions like SOIC at some point in the future? Is that correct, Charles?.

Yes. Thank you very much..

Okay. Let me answer this question, Charles. So far, the SOIC is primarily adopted by the HPC applications. Okay. Because of that it's very fit for their high-speed and power efficient. But for mobile adoption, it will depend on their chiplet's architecture, interconnect density requirement, thermal or other requirement.

And we will have other solution to address the mobile requirement..

Okay, alright. Thank you, Charles. Operator, can we move on to the next participant, please. .

Next one to ask questions, Mehdi Hosseini from Susquehanna International..

Yes, thank you for taking my question. I just want to go back to the CapEx. I think the Chairman has guided back in 2021, the shipment guide to worth TWD 100 billion of CapEx during the 2021 through 2023 period. And now this morning, you're highlighting the fact that CapEx this year could be TWD 40 billion.

So if I was to use the TWD 100 million, the both suggests to me that your CapEx could be down by as much as 8% to 10% in 2023, unless you are really that TWD 100 billion guide. I just want to get some color on this, and I have a follow-up..

Okay. So Mehdi’s first question is on our CapEx. He notes back in April of 2021, we had guided for TWD 100 billion CapEx in the next three years.

And so now he's adding the math up for last year and this year, and wondering, does that apply -- sorry, imply a decline in our CapEx for 2023? Or do we have a new revised guidance for the CapEx spend?.

Mehdi, let me answer this. We're not going to talk about the TWD 100 billion today. We're not going to comment CapEx beyond 2022. We've already given the guidance range of 2022. Now as we mentioned before, every year, when we invest in CapEx, it is for the future growth opportunities.

So as long as there -- we believe the future outlook is good, we will continue to invest in a disciplined manner..

Got it. And just a quick follow-up here. Despite the fact that CapEx was up 76% last year, 2021, the depreciation so far has been tracking flattish. It was flat in Q1, down 2% in Q2.

Should I expect a big step-up in depreciation going forward?.

Okay. So Mehdi also wants to follow up to ask about depreciation.

Despite the increase in CapEx, why is the depreciation growth pretty flattish or low so far this year? And then should we expect a step-up in depreciation for 2023?.

Mehdi, every year, there are new depreciation coming in. But at the same time, there are depreciation getting out of the depreciation table. So some comes in, some goes out. This year, we expect that depreciation will grow above mid-single-digits from last year.

It is slower -- lower than when we guided at the beginning of the year because of some two delivery schedule change, as C.C. mentioned earlier. Now for next year, the -- it's too early to give a specific number, but the depreciation will be much higher than this year..

Okay.

And just since everyone had most second question, may I squeeze one quick follow-up?.

Well, you have 1.5. I'll let you another half question, please, Mehdi, because we still have a few people on the line. Yes..

Sure. I'll make it very quick. When I look at your customers, their inventories are at a 25-year high. And I think everyone is going to take a look at the seasonality in the second half.

And I'm just curious, what are the key variables? What are the key metrics? Or what are the key strategies that you have in place that could mitigate the gross margin balance by this if your customers become more aggressive in inventory correction into next year?.

Okay. So Mehdi's question is noting customer inventory at customers are very high.

So what would be the key variables or metrics for TSMC to mitigate our gross margin downside or risk if customers were to adjust their inventory further? Is that correct, Mehdi?.

Yes. If they become more aggressive in inventory correction into first half next year..

If they were customers were to become more aggressive on their inventory correction into first half next year..

Well, let me answer the question. As I stated in the remark, our customer are doing the inventory correction. But I said that customers demand still exceeds the TSMC's capability to support for this year.

So even they do the inventory adjustment, what I say that they decrease their demand versus their original number, TSMC's capacity is still very tight and will remain very healthy in the utilization. So that's why we can keep our gross margin intact.

Did I answer your question?.

Thank you, Mehdi. Operator, let’s move on to the next participant, please. .

Next one to ask questions, Brad Lin from Bank of America..

Hello, good afternoon everyone. Thank you for taking my question. So firstly, our congratulations once again on the strong earnings. And my first question is about advanced packaging. We learned the advanced packaging is very, very important for TSMC's long-term growth and TSMC has a great variety of offering to provide higher value to customers.

So would you please share your insights on what are the key barriers are for wider adoption by plants? And would you expect the contribution mix to increase gradually? Or if there is a point to see an explosive growth from the advanced packaging? And by the way, we saw the news about the DDIC in Japan and how will that can accelerate their progress.

Thank you very much..

Okay. So Brad's question is on advanced packaging.

I believe if I heard you correctly, what are the key barriers for wider adoption of our packaging solutions by customers? What is the long-term revenue growth outlook of advanced packaging? Is it going to be explosive growth or growth similar to the corporate average and also the role of our 3DIC center in Japan in developing advanced packaging solutions?.

Okay. That's a very long question, but let me answer one by one. First, we developed a very advanced packaging technology to meet the customers' demand. So far today, 3DIC or SOIC, we develop for the high-speed performance, HPC applications first. And the other one, mostly starting to be adopted by all HPC customers starting from today.

So we expect is gradually will ramp up. And until that's 2-nanometer, I think I have much more demand in that technology node for the 3DIC. That's what we expect. And we expect the growth of these 3DIC business will be healthy, probably a little bit ahead of TSMC's growth forecast. Now let me turn to the 3DIC center in Japan.

We established 3DIC center because of Japan has a fundamental advantage on the raw material also under packaging area. For example, the substrate, they are the number 1 in the world. And we need that one technology to complement the TSMC's 3DIC technology so we can serve our customer better.

And that's why we established a 3DIC center technology development center over there.

Did I answer your question?.

Yes, yes. Very clear. Thank you, sir. So maybe another follow-up, that's also about the IC substrate. So ABF actually substrate currently plays a very important role in advance packaging, of course, especially for coax and the substrate demand potentially in largest with the increasing advanced packaging penetration.

So with the rising integration level of a chip, do you expect new material to potentially replace ABF? And any plan to secure substrate supply or upgrade the designs for TSMC for future requirements? And maybe one last follow-up is that, if we compare 2.5D and 3D, would you need more substrate for 3D? Thank you..

Okay. Well, Brad's second question is on substrates.

He wants to know, with the development of substrates and the adoption, do we see further developments in terms of new materials? Will we see more substrates used in 3DIC versus 2.5D? And will we -- how do we secure the substrate supply?.

Well, this one we are working with the substrate partner. And your question is the 2D, 2.5D or 3D, both, both are important. But let me tell you one further step. We're only interested in the very advance technology. We are not going to develop any commodity of the substrate technology to compete in the market. No.

We are developing for the very high performance computing or very large substrate to support TSMC's customer. That's our purpose..

Okay. Thank you, C.C. Operator, can we move on to the next participant..

Next one to ask question, Krish Sankar from Cowen & Company..

Yes, hi. Thanks for taking my questions. I have two of them. The first one is, when I look at your full year guidance of 35% revenue growth, it looks like calendar 4Q or the December quarter is going to be sequentially down more than 10%. And that hasn't happened in a long time.

So I'm kind of curious, how much of that is driven by demand versus FX? And then the second question, a follow-up is, if I look at your CapEx run rate, the first half is running at about TWD 17 billion, which is below the lower end of your full year guidance.

So I'm kind of curious, what are the tool delays that's causing the pushout of CapEx into next year? Is it like EUV? Is it like depth edge tools? Any color on that would be super helpful. Thank you very much..

Okay. So Krish has two questions.

First is looking at our full year guidance to grow mid-30s, and he says this implies a decline in the fourth quarter?.

No, I don't think so. We did the calculation. Maybe you can do that again. It's at least up..

Yes. Krish, I would note that when we talk about mid-30s guidance, as C.C. said, that is in U.S. dollar terms. Okay..

And then his second question is on CapEx and sort of looking at the CapEx. His question is we have already said it will be closer to the lower end of the range. He wants to know what is driving the CapEx.

Is it tool delays? Is it EUV? What types of equipment?.

No. I don't think we can go into that kind of details. But some of them got pushed out to next year, as C.C. mentioned. And every year, the CapEx profile can be difference quarter-by-quarter..

Okay, thank you. Operator, in the interest of time, I think we’ll take questions from the last two participants, please. So, let’s move on to the next. .

The next one to ask questions, Frank Lee from HSBC..

Thank you. I wanted to just ask a question on, I guess, the overall profitability and also pricing. It seems like this year, we start to see a foundry price increase and a bit unusual for TSMC. And going into next year, it looks like there's some manifestation of further price increases.

But at the same time, we're also seeing potentially inventory correction. So just trying to understand the pricing strategy itself, is this more of a reflection of perhaps the structural profitability for this cycle being different than the past? Or are there any kind of cost that we're seeing this time that we haven't seen in past cycles..

Okay. So Frank's first question is on pricing. He wants to know what is driving our pricing strategy.

How do the cost inflation or factors play into it? And really what drives TSMC's pricing?.

Yes. We do not comment on our pricing details. These are the private discussion between us and our customers. Having said that, our pricing is strategic and value-driven, not opportunistic or cost plus. We work closely with our customers to provide our value.

And we will continue to ensure that our pricing reflects our value creations, including technology, ecosystem, and services and capacity support. By taking all these actions, we believe we can achieve a long-term gross margin of 53% and higher. We do face manufacturing cost challenges.

As we mentioned, rising raw materials, utilities and tool costs, et cetera. But having said that, we still think that the 53% long-term gross margin is achievable, and 53% and higher. .

Okay.

Frank, do you have a second question?.

My second question is, I understand the overall view on that. But given what you guys just talked about the overall cycle, I know you still have some -- the leadership in the event side and everything else.

But is there a potential bill effect where customers could see a stronger second half this year in anticipation of price increases? And with the adjustment going into next year, that we see some more weakness in the first half more than anticipated in the first half?.

Okay. Well, Frank's second question is with pricing, will -- could there be a situation where customers, I guess, will pull in more of their business to second half of this year, and thus, we would see a weaker first half next year..

No, we did not see that. We are actually -- we are working with our customers and we try our best to support our customers. As I said, even right now, our capacity remains very tight. So the switching between the next year's first quarter and this year's second half, no, we did not see that, just simply put it..

Great. Thank you, Frank. Operator, can we take questions from the last participant, please. .

The last one to ask questions, Robert Sanders from Deutsche Bank..

Yes. Thanks for taking my questions. I just have two. The first one is just if you could just discuss how much of next year's revenue is under LTA. The reason I'm asking is because there are some people in the market thinking that customers may be fearful of pushing our wafers because they may be jeopardizing agreements for next year.

And then the second question would be just to on the chiplet question. I was just wondering what percentage of the 2-nanometer HPC designs will be using a chiplet architecture. Is it the majority? What's the adoption rate? Thanks. .

Okay. So Robert's first question is he wants to know how much percentage of revenue to long-term agreements with customers represent for TSMC. Maybe Wendell can address this question..

Yes. Robert, we don't discuss the details like that. We work very diligently and closely with the customers to plan the capacity including receiving the prepayments for capacity support. And we will continue to work with them to decide to determine the best way to support them going forward..

Okay. And then his second question is on N2.

He wants to know, for HPC applications on N2, what is the percentage or that may adopt a chiplet architecture approach?.

I cannot release the number. But let me assure you that the number of the customers using the chiplet in the N2 or the 2-nanometer technology will start to increase and that will become a major approach in the 2-nanometer and the following technologies..

Okay. Thank you, C.C. Thank you, Robert. And thank you, everyone. This concludes our Q&A session. Before we conclude today's conference, please be advised that the replay of the conference will be accessible within one hour from now and the transcript will become available 24 hours from now.

Both of which you can find available through TSMC's website at www.tsmc.com. So thank you for joining us today. We hope everyone continues to stay healthy and safe. And we hope you will join us again next quarter. Goodbye, and have a good day..