[Foreign Language] In English, the earthquake that just took place at 1:10 this afternoon has no impact to TSMC’s fabs or the back-end packaging fab. So there’s no impact. Thank you. [Foreign Language] Welcome to TSMC’s First Quarter 2019 Earnings Conference and Conference Call.

This is Elizabeth Sun, TSMC’s Senior Director of Corporate Communications and your host for today. Today’s event is webcast live through TSMC’s website at www.tsmc.com. If you are joining us through the conference call, your dial-in lines are in listen-only mode.

As this conference is being viewed by investors around the world, we will conduct the event in English only. The format of today’s event will be as follows. First, TSMC’s Senior Vice President and CFO, Ms. Lora Ho, will summarize our operations in the first quarter 2019, followed by the guidance of the second quarter. Afterwards, Ms.

Ho and TSMC’s CEO, Dr. C.C. Wei, will jointly provide company’s key messages. Then we will open both the floor and the line for the Q&A. For those participants on the call, if you do not yet have a copy of the press release, you may download it now from our website at www.tsmc.com.

Please also download the summary slides in relation to today’s conference presentations.

As usual, I would like to remind everyone that today’s discussions may contain forward-looking statements that are subject to significant risks and uncertainties, which could cause actual results to differ materially from those contained in the forward-looking statement. So please refer to the safe harbor notice that appears on our press release.

And now I would like to turn the microphone to TSMC’s CFO, Ms. Lora Ho, for the summary of operations and current quarter guidance..

Thank you, Elizabeth. Good afternoon, everyone, and thank you for joining us today. My presentation will start with financial highlights for the first quarter, followed by the guidance of the second quarter.

First quarter revenue decreased 24.5% quarter-over-quarter as our business was impacted by the overall global economic conditions, which dampened the end market demand, also customers' inventory corrections and high-end smartphone seasonality and the photoresist defect material incident.

Due to lower level of capacity utilization and the negative impact from a photoresist defect material incident, gross margin decreased 6.4 percentage points sequentially to 41.3%. Total operating expenses decreased by about TWD 4.8 billion and they represented 11.9% of total net revenue in the first quarter.

So operating margin decreased by 7.6 percentage points sequentially to 29.4%. Overall, our first quarter EPS was $2.37 and ROE for the first quarter was 14.4%. Now let’s take a look at revenue by technology. 7-nanometer technology accounted for 22% of wafer revenue in the first quarter, 10-nanometer was 4% and 16-nanometer was 16%.

Advanced technologies, which we now define as 16-nanometer and below, accounted for 42% of wafer revenue. Now let’s take a look at revenue contribution by application. During the first quarter, Communication, Computer, Consumer and Industrial/Standard decreased 27%, 31%, 10% and 16%, respectively.

Now this is the last time we provide a revenue breakdown by application. From this quarter on, we will report revenue breakdown by platform as we believe this change will better represent the company’s results. Now let me explain how to read the table.

The table shows the – between the four application and six platforms how do they relate to each other. In general, within computer application, almost all revenue is from HPC. Within Communication, about 2/3 is from smartphone. HPC is about 1/5, and other platforms are single digit each.

Consumer is mainly distributed between HPC and the digital consumer electronics whereas Industrial/Standard spread across all platforms, with smartphone and HPC each representing above 30%. Now let’s take a look at revenue contribution by platform for the first quarter. Smartphone decreased 33% to accounted for 47% of our first quarter revenue.

HPC decreased 26% to accounted for 29%, while IoT, automotive, digital, consumer electronics and others accounted for 5% to 7% each. Now I would like to move on to the balance sheet. We ended the first quarter with cash and marketable securities of TWD 760 billion, an increase of TWD 65 billion from the last quarter.

On the liabilities side, current liabilities increased by TWD 38 billion. On financial ratios, accounts receivable turnover days increased eight days to 49 days, a sales decrease faster than average accounts receivable. Days of inventory increased 12 days to 79 days, reflecting 7-nanometer wafer prebuild and an increase in raw wafers.

Now let me take a few comments on cash flow and CapEx. During the first quarter, we generated about TWD 153 billion cash from operations and spent TWD 76 billion in capital expenditures. As a result, we generated free cash flow of $77 billion and our overall cash balance increased $88 billion to reach $646 billion at the end of the quarter. In U.S.

dollar terms, our first quarter capital expenditure was $2.46 billion. I have finished my financial summary. Now let me provide the second quarter guidance. Based on the current business outlook, we expect second quarter revenue to be between USD 7.55 billion and USD 7.65 billion, which is a 7.1% sequential increase at mid point.

Based on exchange rate assumption of USD 1 to TWD 30.85, our first quarter gross margin is expected to be between 43% and 45%. Our first quarter operating margin is expected to be between 31% and 33%. Also, in the second quarter, we will again need to accrue the 10% retained – 10% tax on undisputed retained earnings.

As a result, our second quarter tax rate will be about 18%. The tax rate will then fall back to 10% level in the third and fourth quarter and the full year tax rate will be about 12%. This concludes my remark. Let me follow by making a few comments about the profitability, CapEx and cash dividend.

First, let me talk about the profitability in the first and second quarter. Our first quarter gross margin declined by 6.4 percentage points sequentially as our 7-nanometer saw a substantial cutback in utilization in first quarter due to high-end smartphone seasonality, which impacted our gross margin by close to 4 percentage points.

In addition, the photo material – photoresist material incident impact our gross margin by about 2.6 percentage points as we indicated in our press release in February. I have just guided the second quarter gross margin to improve by 2.7 percentage points sequentially at the midpoint.

Since most of the wafer scrapped in first quarter due to the photoresist incident will be made up in second quarter, gross margin can improve by about 1.5 percentage point in this quarter.

In addition, the 7-nanometer dilution in second quarter, as compared to fourth quarter 2018, will be close to 3 percentage point, which is about 1 percentage points improvement from the first quarter in terms of dilution. And we also expect a slight improvement in other nodes' utilization rate.

Our gross margin in first and second quarter are primarily impacted by a lower capacity utilization rate. As our business and utilization rate improves in the second half of this year, we believe about 50% is still a target for our gross margin going forward. Now I will talk about the CapEx outlook.

We reiterate our 2019 CapEx to be between USD 10 billion to USD 11 billion. About 80% of the CapEx budget will be allocated for advanced process technologies, including 7-nanometer, 5-nanometer and 3-nanometer. About 10% will be spent for advanced packaging and mask making, and about 10% will be spent for specialty technologies.

As I have stated before, we see our CapEx forecast between USD 10 billion and USD 12 billion to support our average growth rate of 5% to 10% per annum in the next few years. My last comment is about the cash dividend distribution.

In the future, TSMC intend to return about 70% of free cash flow to shareholder every year by distributing quarterly dividends. TSMC also remains committed to sustainable cash dividends on both an annual and quarterly basis.

In June, TSMC will hold the annual shareholder meeting to approve the Board’s proposed TWD 8 cash dividend per share for the full year of 2018. And the shareholder meeting will also approve the revision of the articles of incorporation to adopt quarterly dividends.

Subject to the approval by the annual shareholder meeting, the Board plans to approve TWD 2 cash dividend per share for the first quarter 2019 and to be paid in the fourth quarter of 2019. Therefore, TSMC’s shareholder will receive a total of TWD 10 per share cash dividend in 2019.

That also means, in 2020, shareholders will receive at least TWD 10 per share cash dividend for the whole year. That concludes my remark. Let me turn the podium to C.C..

improved TSMC’s own in-house incoming material, conforming test and controls; upgrade control and methodology with all suppliers for incoming material quality certification; establish robust in-line and off-line monitoring process to prevent defect escape. Now I will talk about our N5 status. Our N5 technology development is well on track.

N5 has entered risk production in first quarter, and we expect customer tape-outs starting this quarter and volume production ramp in first half of 2020. With 1.8 times logic density and 15% speed gain and an ARM A72 core compared with 7-nanometer, we believe our N5 technology is the most competitive in the industry.

With the best density performance, power and the best transistor technology, we expect most of our customers who are using 7-nanometer today will adopt 5-nanometer. With N5, we are expanding our customer product portfolio and increasing our addressable market. Thus, we are confident that 5-nanometer will also be a large and long-lasting node for TSMC.

Now I’ll talk about the ramp up of N7 and N7+ and introduction of N6. We are seeing strong tape-out activity at N7, which include HPC, IoT and automotive. Meanwhile, our N7+, which adopts EUV for few critical areas, has already started volume production now. The yield rate is comparable to N7.

We’ll reaffirm N7 and N7+ will contribute more than 25% of our wafer revenue in year 2019. As we continue to improve our 7-nanometer technology and by leveraging the EUV landing form, N7+, we now introduce N6 process. N6 has three major advantage.

First, N6 have 100% compatible design rules with N7, which allows customer to directly migrate from N7-based design, which substantially shorten the time-to-market. Second, N6 can deliver 18% higher logical density as compared to N7 and provide customer with a highly competitive performance-to-cost advantage.

Third, N6 will offer shortened cycle time and better defect density. Risk production of N6 is scheduled to begin in first quarter year 2020 with volume production starting before the end of 2020. Now let me talk about our advanced packaging technology.

TSMC’s advanced packaging strategy focuses on providing advanced wafer level system integration technologies to meet customers' product needs. Currently, we have offered InFO and CoWoS for several generation and recently introduced SoIC. We believe heterogenous integration and package endeavor has become a clear trend for many applications.

All our advanced packaging platforms and our efficient system level integration, and will continue to do so. Our fourth generation InFO solutions provide a final interconnected line with anticipation to enable both mobile and HPC products.

CoWoS continue to see good growth momentum in demand from HPC and the AI applications as we continue to expand beyond the radical size. We are also working with a few leading customer on SoIC, which is an industry-leading 3D-IC packaging solution. We target to start production in 2021 time frame.

The traction of our advanced packaging solution has been strong in mobile and HPC segment and we have seen inquiry form automotive segment as well. We therefore believe our advanced packaging solutions will contribute to our business growth for years to come.

Finally, I will talk about the HPC as our most important growth driver in the next five years. CPU, AI accelerator and networking will be the main growth area for our HPC platform.

With the successful ramp of N7, N7+ and the upcoming N6 and N5, we are able to expand our customer product portfolio and increase our addressable market to support applications, such as data center, PC and tablets. Meanwhile, we also see networking querying thanks to 5G infrastructure deployment over the next few years.

We are truly excited about our growth opportunities in HPC. Thank you for your attention..

All right. This concludes our prepared statements. [Operator Instructions] First question will be coming from Citigroup’s Roland Shu..

First question. As C.C. said, you maintain your view for the whole year revenue to grow slightly. So that means according to your first quarter revenue, second quarter guidance means that second half is going to grow very fast.

So can you just let us know what kind of applications are driving so strong second half to TSMC this year?.

The strong demand I just mentioned from 7-nanometer actually including the mobile platform, HPC platform and IoT, which is a little bit flattish over automotive, but that’s all that what we rely on. Actually, we will say that seasonality of the mobile phone, the new product launch that make the major contribution..

Yes. And I just through this calculation. I think for second half, your revenue actually is going to grow year by year in, maybe, mid-single digit year-on-year.

So I think, except for this seasonality, do you gain share or do you have more new applications in second half?.

We actually gained some shares because of 7-nanometer. And for the new product portfolio, that will be probably you will see the effect in 2020, not much in this year..

Okay. Yes, and also for the second half gross margin, lower sales with this higher utilization and also with the less dilution from 7-nanometer. So is that your long-term gross margin will be – target will be 50%.

So is this means that for second half or just for the long term?.

Both..

Okay. My second question is, C.C., last quarter, you said that now we are at the market with the widest addressable market driven by HPC and CPU. And C.C. also said that HPC is going to be our most important growth driver.

So can you quantify how big foundry addressable market will be driven by HPC and CPU, respectively?.

I don’t think I have enough data to tell you that how much we can quantify the percentage. But I believe the HPC platform will grow double digit excluding the cryptocurrency, of course..

How about the CPU?.

Too specific..

Okay. And I think, lastly..

Roland, you have more than two..

This is a follow-up for the second question. Yes.

So do you have any competition on this CPU foundry also?.

Again, I don’t want to be too more specific on the CPU area, all right, Roland?.

Next. The question will be coming from JPMorgan’s Gokul..

So my first question is on 5-nanometer. I think in the last conference call, C.C., you mentioned that TSMC will be initially building a few percentage points or some lower capacity on 5-nanometer in 2020 compared to 7-nanometer.

Now that you have more visibility into your customers' plans, could you let us know what does that mean? Is that 30% lower, 10% lower? What does it mean? And why is that? Is it because customer is a little bit hesitant to go to 5-nanometer and has other options? Or you just believe that, like you previously mentioned, the only reason is that high-end smartphone demand expectation, you’re taking a more cautious view on that? That’s my first question..

Actually, Gokul, I like your last sentence, you say that’s more cautiously. Let me repeat again that we say N5’s the initial ramp, it might be slower than the N7. First, we learned a lesson from the N7’s wafer loading. Look at this year, so first quarter and second quarter right now, it’s actually very low so we learned a lesson.

So we are working with the customer to be more cautiously and effectively manage the capacity ramping, so that’s what I said that it will be a little bit slow. But that being said, the N5’s business, I want to reassure everybody that N5 as a business will grow bigger than N7 because our expanding the product portfolio, and you know what I mean.

In the HPC, we have very good opportunities and on the smartphone we are gaining market share. So I will believe that N5 initial ramp probably a little bit more cautiously slower than the N7, but it will pick up quickly..

Okay. Got it. My second question is on the technology leadership. I think TSMC clearly now seems to be ahead of even IDMs in terms of technology leadership.

How should we think about how that translates in a financial basis? What we’ve seen in semiconductor industry in the last several years is when one player becomes the dominant player, typically, margins go up.

How should we think about this? What is TSMC’s philosophy in terms of utilizing this technology leadership? Are we looking for higher than market revenue growth or we should expect structurally higher margins in the future years now that we are kind of getting through the smartphone saturation period and getting into HPC?.

As you pointed out, we have technology leadership and supposed – and we are working on it also. Actually, we want to grow the market share. We want to do a bigger business with a higher product profitability. I don’t have enough data in my hand to give you order analysis in the future years, but we are working on it.

And that the goal we are working on, actually, higher profitability and gain market share..

So just one sub question there. I think if we observe the last couple of years, TSMC – foundry industry has not outgrown semis, ex memory. And TSMC also has not grown much faster than the foundry industry, which was not the case in the past. In the past foundry was growing much faster than semis, and TSMC was growing much faster than semis – foundries.

So when do we expect that gap to open up between TSMC’s growth and foundry growth and potentially foundry growth and semis growth itself?.

You are asking more and more specific on the schedule. I would – I would expect that starting from the second half of this year and extended to the next few years, we will start to widen the gap.

Did that answer your question?.

That’s specific enough..

Next question will be coming from UBS, Bill Lu..

So in the last couple of months, I’ve had a chance to visit a few fabless customers and I feel like the feedback that I’m getting is that, maybe previously, there was more concerns about EUV feasibility. That is now mostly going away or maybe it’s less. But on the flip side, I hear maybe a bit more concerns about cost per transistor for 5-nanometers.

I’m wondering if you agree with that and what can be done about that..

Well, that’s a good question. We did some calculation by ourselves. We still think that cost per transistor is still decreasing, but not as fast as it used to be. That’s one thing. As you mentioned about the EUV, today, we put the EUV into mass production already, and we learned some kind of experience so that we can introduce N6.

But is EUV productivity is very good already? Not yet. We expect it to continue to improve every year, just as we did for the emerging photolithography. So we expect in the future that EUV will offer a best tool in terms of cost, in terms of technologies moving forward, but not today yet.

There’s still a lot of process complexity, so we’re using the EUV to replace some of the very critical areas and the cost will probably are equal today. And in the future, we hope it will improve. Once it improve, the cost per transistor will decrease faster..

Is there a timing for that?.

No. But as fast as possible..

Sorry. Second question is just a clarification. I think, previously, Dr. Wei said that HPC ex crypto grows double digits.

Is that for this year or is that longer term?.

For this year, it’s closed. For longer term, that’s what I mean, for longer term..

Yes. Really appreciate the breakout by platform.

Can you help me with this year’s growth, maybe just for smartphone versus HPC?.

Both are probably in the middle-single digit, somewhere around that..

Okay. So HPC is close to that ….

Yes..

Without crypto, mid-single digit including crypto?.

No. HPC without the cryptocurrency, it will be somewhere mid-single digit. With the cryptocurrency, it’s dragged down..

Next question will be coming from Morgan Stanley’s Charlie Chan..

First of all, just want to follow up that HPC segment because just compare the notes, last quarter, we said HPC excluding crypto upsizing right? Including crypto, down more than 10%. So it seems like the number seems to be a little bit better.

Is that the right comment about HPC market doing better than expected?.

Yes. It’s doing better because of one of the factor or one of the component in HPC is networking. And you know that 5G’s deployment, so that helped the growth of the networking quickly..

Okay. Yes, so I think this is related to my second question, right? I think a lot of shareholders are saying that some big customers in smartphone and the base station segment is building up inventory for whatever reason, share gain or semiconductor strategic inventory.

But you mentioned – you also said that you believe the inventory level will be back to normal around the midyear.

So my question is do you worry about this kind of overview of inventory and how are you going to manage that kind of risk?.

We don’t specifically comment on one customer’s particular business behavior, but then we share with you why we say that the inventory will be greatly reduced and be close to the seasonal level around the middle of this year.

We actually will look at our history in the second quarter, the customer’s growth rate, and we’re using that number and look at the customer’s demand number to give to us in the second quarter. And we do some calculation and we come to a conclusion that they are digesting their inventory quickly.

So that’s how we say that’s in the second quarter, we are not building the inventory. They are actually – they are reducing the inventory quickly. And that’s why we come to the conclusion that in the second half, we will [indiscernible] inventory base..

Okay. Yes, maybe a quick question to Lora on cash dividend. So you – so this year, I think the quarterly run rate is like $2 per quarter, right, but the annual dividend payout is actually $10 in total, right.

So for next year, what will be the kind of minimum dividend payout to use $2 run rate so we get like $8 for full year for 2020, you said the guidance..

This year, actually, is a transition year, so we issue twice of cash dividend. First, $8, followed by the $2 on quarterly basis. Starting from first quarter next year, we will only have a quarterly dividend, and we want to have a sustainable on quarterly dividend and on annual both. So we will likely see more stable dividend on quarterly basis as well.

So since I said, the dividend will be no less than $10, and we want to be stable on quarterly basis. So you can assume or expect we will issue $2.50 on quarterly basis at least..

All right. Next question will be coming from Credit Suisse, Randy Abrams..

I want to ask a follow-up. It was a good disclosure moving to the new platform segmentation. Could you talk about sequential pickup? How you see the different four platforms? How they’re sequentially improving from this low level.

And then for full year, since we’ve got the first pieces also the IoT and automotive, what your views on the other segments for the full year?.

I will first comment on the second quarter on a sequential basis by platform and followed by the full year picture. Is that what you’re asking, Randy? Okay. For second quarter, we are expecting smartphone to grow single digit.

HPC grow double digit, and IoT, automotive and others will grow single-digit, and the digital consumer electronic will slightly decline. okay. That’s for second quarter. For the whole year, we expect smartphone will grow high-single digit. HPC excluding crypto will grow high-single digit as well.

And IoT will grow double digit, automotive will decline single digit, and digital still cameras and others will decline single digit. That’s the overall picture for this year..

Okay. Great. Appreciate that. And then follow-up on the migration for these derivatives, 7-plus and six nanometer. It seems to date, the adoption has been rather slow for this year. If you could talk maybe about factors why a lot of customers are staying on seven for now.

And as the node matures, if you could talk about the pace? How you see customer see a percent of the node or how meaningful next one or two years for those derivative process?.

As I said, we have a very high tape-out activity for N7 for this year. Actually, a lot of customer from the [indiscernible], and mostly is from the HPC area, they are all designing their product with N7. A few of them has adopted N7+. But then that’s why we introduced our N6 that can be 100% compatible to the N7.

So I’ll give you a taste of that probably starting year 2020. Most of the customer in the N7 will move to N6. And from that beyond probably, the N6 will pick up all the momentum and pick up all the volume production..

Okay. Great.

If I can ask a follow-up to, given the strength on these derivatives, 6-nanometer, 5 and optimism, do you have any different view on 28 about – if any of this equipment could be migrated to these advanced nodes? Or do you think it will be all new capacity?.

From node to node, we have about 90% of the common tool or bigger than 90% of the percentage of the common tool being used for the next node. So you bet that some of the tools from 28-nanometer can be used for 7 or for 5, okay? But of course, it’s less and less.

But to – for the overcapacity in the 28-nanometer because of some of the market-driven capacity increase, we – our strategy is to develop some of derivative technology like a 22-nanometer and so that we can ensure that we still have standard growth in the future..

Next question will be coming from Daiwa’s Rick Hsu..

[Foreign Language] This is Rick from Daiwa. So I think the first question is about the follow-up on the N6. My question is would you worry whether the N6 will cannibalize N5 development because this node looks pretty close..

The number N6 and N5 looks pretty close, but actually the performance are – they still have a big gap. N5 compared with N7, actually, the logic density increased by 80%, 8-0. N6 compared with N7 is only 18. So you can see there’s a big difference in that logic density and transistor performance also.

And so as a result, the total power consumption in the chip is lower in the N5. And also that – there’s a lot of benefit if you move into N5. But nevertheless, N5 is one of the node, full node, and it takes time for the customer to design their new product. The beauty of the N6 is they’re already designing N7. They spend a way minimal effort.

They can move into the N6 and gain some benefit. And so some of the customer that depend on their product as characteristic [ph] and their market, they are defined which one go to N6, which one go to N5..

Can I have one quick follow-up to the first question before I ask the second one? Just a quick follow-up. Can you share the number of critical layer that will be built by EUV for – I know for 7+, you – I think last year, you mentioned just few layers, critical layer for EUV.

What about N6 and N5?.

Okay. N6 has few critical layer plus 1. Okay. That gives you a hint. N5 has plus many, so....

Okay. That’s very clear. And my second question is you look at your end first quarter inventory days, 79. If I don’t remember wrong, I think this is probably kind of an all-time high in the history.

Majority of this inventory were finished wafers or can you share some idea – and also, can you elaborate a little bit more what’s the rationale behind that 79 days?.

Yes. Okay. Rick, 79 is really high, but there’s a good reason for that. Because we anticipated 7-nanometer capacity will be very tight in the second half. Well, it’s not so tight. It’s very empty in the first half. So we’re trying to preview some of the inventory for our customer in work in process.

So they will not be constrained by our second half capacity. So by doing so, that work in in process value will certainly go up, right? So when we move in the second half, when we digest those inventory and demand start to pick up, our days of inventory will come down in the second half..

Next question will be coming from Bruce Lu, who is now with Goldman Sachs..

My first question is still going back to the smartphone. Management mentioned that the smartphone growth is going to be high single digit. This is substantially stronger than the smartphone shipment growth. And management also guided previously that the next couple of years, smartphone growth will be mid-single digit.

Again, it’s also higher than the smartphone shipment growth in our view.

So where is the growth coming from? Is it mainly driven by the content growth or share gain either by your customer or yourselves share gain? And can we somehow quantify that a little bit?.

Quantify, I probably cannot. But the answer to your question is both. We gain the market share and the content increase quite a lot..

Can we know like which one is stronger?.

You got me. I want both of them to be as high as possible, but I don’t have a calculation. Because of the market share gain, we have to be very careful into doing the calculation. And also the content increase. Let me say that content increase in the 5G area or in the AI area, every customer are different. So they put a different functionality inside.

And we don’t have a very good detail or detail inside to give you exactly a number to quantify what is the percentage per se..

I see. The reason I tried to dig down a bit further is that if the content growth which means that, that will be at expense of the smartphone cost structure. So you have higher content growth, which means that semi content in terms of cost structure is higher, which at the end of the day will dampen the smartphone shipment as price elastic.

So how do you – we’ve foreseen very, very strong content growth, which means that the cost structure for your customer will be much higher at the end of the day. So there will be certain trade-off at the end of the day..

There will be certain trade-off of the high-end smartphones pricing and their cost, of course. But for TSMC, our job is to fully support customers' need. When they need this functionality, they need this kind of speed, we support it. Whether that will increase their pricing or the smartphones end market strategy, that’s not really our concern.

We support it all the way..

Okay. My second question is more for Lora. So can you somehow help us to quantify the margin impact in 2020 as we can expect like very high – very quick ramp-up for the 5-nanometer, which naturally, in the first year, there will be the negative margin impact.

And we will come into the third year of 7-nanometer, so the margin negative impact should be less, but you have new margin negative 0.5.

So how do we – can we get some color on it?.

The margin impact actually has two front. Number one, introduction of new technology as you just mentioned. Usually, in the first year, there’s a dilution to corporate gross margin. The other factor is utilization on each technology node, particularly the advanced technology node is more sensitive to utilization.

So if we look at the corporate margin, we have to take consideration of both. But if we just talk about the leading-edge introductions, N5 will be like N7. It will have some dilution next year. And so we have indicated before, it takes seven or eight quarters to reach to corporate level. We believe N5 will follow the same pattern..

But can we assume that the first two quarters of N5 in the second half next year when you ramp-up the negative impact for the margin is likely 2% or 3% like what we had in 7?.

No. We need to look at what’s the ramping speed as well. Because if you ramp faster, eventually, you can get through the learning curve quicker. So if you ramp slower, you’ll take long time. So it’s – many factors will affect that..

I see. Because most of the investor concern is that with EUV potential higher CapEx, blah, blah, blah, so that might have higher negative impact in terms of gross margin when we ramp up five. So we just want to get some color to clear the concern..

I think the N5 impact will not have difference than our previous leading nodes..

I think this is about time that we should go to the line for the questions.

Operator, could you please have the next caller on the line?.

Sure. Next question is from the line of Brett Simpson of Arete Research..

I have plenty of questions for C.C. First on FD-SOI. It seems to be getting more traction in 5G than we first thought both on the – On RF-SOI and on the modem side for handsets. So I’m just keen to understand if TSMC might consider supporting FD-SOI or RF-SOI.

And if not, how you plan to defend against it?.

Okay. The question is FD-SOI has some good momentum in 5G area. And does TSMC consider to develop the FD-SOI? The answer is no. Actually, we also offer very good technology, 22 nanometers technology that today’s performance is very comparable to FD-SOI, if not better.

And we’re talking to the customer right now and a lot of customers start to adopt the TSMC’s approach. So no, we are not going to develop FD-SOI technology..

Okay. Thank you for that. And just a follow-up, C.C. Can you give us your perspective on TSMC’s strategy for quantum semiconductor materials like gallium nitride or silicon carbide? It seems to be still very small market, but the potential long term seems to be quite significant. So how does TSMC plan to deploy these in its variance? Thank you..

Okay. The question is about [indiscernible] compound or that compound semiconductors. TSMC actually is developing the gallium nitride technology to support the power management IC or the high-voltage, high-current power management. And others like gallium arsenide to have a high frequency or those kind of thing, no, we are not doing it.

We – actually, we are doing the gallium nitride project to support our customers' need. That, today, we are doing. Silicon carbide, no. We are not doing it also..

Okay, thanks very much..

Operator, can you have the caller on – the next caller on the line, please?.

Sure. We have Mehdi Hosseini of SIG..

Yes, thank you for taking my questions. Two questions. First one, is your guide on the smartphone revenue growth of high single digit this year impacted by one of the leading semiconductor company exiting the baseband business. And I’m just trying to better understand how you view going to capital as an opportunity, and I have a follow-up..

Mehdi’s question is that whether or not this year are a high single-digit growth in the smartphone platform is affected by one very large company’s exit from the baseband market..

Well, again, we don’t comment on specific customer’s business situation, but I will say this year that we have a high single-digit smartphones, of course. It’s that because of, one, we gained market share. Two, again, that silicon content is higher. So that’s why we say we have high single-digit growth..

Okay. Great. And then turning onto the 6-nanometer. I’m just trying to better understand the applications that would utilize 6-nanometer. And if I heard you correctly, six is going to be ramping later than five.

And if you could elaborate on the current applications that would use that would be good at understanding that particular node?.

Right. The question is about N6. It looks like N6 is behind N5 in terms of schedule. So what is the application? Well, again, I want to reiterate that N6 is coming from the N7, N7+ experience, learning. And so the N6, if you – a lot of customers are already entering N7 with a lot of tapeout.

So N6 provide them a very good task that they can easily put in their current product into N6. So gain the benefit of either the performance, the tie area and also the shortened cycle time. N5 is a totally new node. So we’re entering into a very new area.

If you start to design the N5 today as compared with you want to enter the N6 with N7 already in your pocket, I think N6 will be much easier. I cannot say that N5 might be part of that but TSMC will help you to move into N5, of course. But you look at the effort that you view the ecosystem.

Ecosystem is the one that’s very important for all the product company want to design their new product. N7’s ecosystem has been very complete. We even offer to the automotive grid, okay? And not to mention about mobile HPC, everything. The ecosystem are ready and equally mature with N6. Because we’re 100% compatible.

Of course, you still have to do some modification. If you want to shrink your tie, you have to rerun your timing, closure, those kind of things. But still much easier from N7 go to N6 rather than N7 go to N5. And that’s the beauty of these two technology.

Did I answer the question?.

Yes. Thank you..

Follow-up question from Citi’s Roland..

Thank you, thanks for taking my question again. So it looks like 2020 will be a very busy year to you. You are ramping up N7 plus, N6 and N5 together in the same year.

So what kind of revenue growth projection underlying these three key technology ramp next year?.

Roland, we don’t forecast next year. And please attend the first quarter next year..

Okay. Then you have so many new technology ramp up next year.

So how about 2021? So any new technology? What kind of new technology you are going to launch in 2021?.

Please attend next year’s....

Thank you. My next question is for Lora. So I looked at your 20-F. I think now your total accumulated legal capital reserves have exceeded paid-in capital in 2018. But still, both direct mid-teen in February have been approved to continue appropriating 10% of 2018 income to legal reserve.

So why don’t you just pay this 10% to investors in order to improve your ROE?.

We are increasing the dividend, and it’s all come from returning including the capital surplus, which we accrue every year. So we can choose not to, but we choose to because we want to be more conservative. And if we needed, we can issue dividend from that accrue as well. So no impact to shareholders..

Okay. Understood.

So it means that from next year, going forward, you are still above at least 10% legal reserve?.

Currently, that’s how we’re thinking. Yes. We will decide each year, okay? We have a very big return in that product.

You know that, okay?.

Okay. Thank you..

Next question will be coming from CL Securities' Sebastian Hou..

Thank you.

My first question is can you give us the numbers of the fabless DOI existing 1Q 2019? And what’s your expectation by the end of this quarter? How many days above?.

Probably at the end of 1Q 2019, probably around 10 days, roughly, okay? This is based on our own calculation, by the way. And in the middle of this year, probably reduce down to very low single-digit. That’s why we say it’s close to the seasonal level..

I need to add a little clarification here. The so-called fabless DOI is according to TSMC’s own top 32 fabless customers DOI. It is not the entire fabless industry. Thank you..

Okay. So for – just also one follow-up on that is the definition of your fabless, does that include some system company? No, it’s just only the fabless, the pure semiconductor companies? Okay.

So I had an impression that earlier the company mentioned that the days of – fabless days of inventory may continue to stay a few days above seasonal level throughout second half this year.

So is that still the case based on the current outlook?.

Very close to seasonal, so we did not come in a few days above. No.

Okay?.

Okay.

But – close to seasonal, but maybe not like really at a seasonal level?.

Well, I would like to say that probably below seasonal level, but we – it’s too early for us. We don’t have enough data to do all the analysis and too early for us to forecast accurately, say, how many days or below or above, all right? But we make our own judgment from the wafer loading and the past histories data.

So we make our own calculation, so we observe that their inventory is greatly reduced in the second quarter. We are confident actually that in the middle of this year, we will be very close to the seasonal level..

Thank you. My second question is on the smartphone growth outlook for this year. Remember last quarter, the company guided smartphone to grow slightly this year. And now it’s like high single-digit. So it seems like about like five percentage point higher based on our own calculation.

And I think you also mentioned about also market share gain, content increase. This time, also the same reason.

So I just wonder which of these two factors have surprised on the upside in the past three months?.

Well, we gain market share. That’s – and actually, our customers gain market share, let me say that. And that is kind of good news to TSMC, although we did not forecast that at the beginning of this year..

Great. That was actually my follow-up question.

So in terms of the market share gain and what’s a surprise on the upside in the past three months, how much of that is your own share gain in the AP or baseband or semiconductor chip? Or how much of that is your customers gain share, so you benefit? Which one is more important?.

How can we separate that one out because of all the high-end smartphones, APs are all in TSMC. So you want me to separate all these customers' gain or TSMC’s gain, I cannot separate out. It’s all in TSMC..

Right. Right.

But are you – would you be worried about potential like – maybe some of your high-end smartphone customers gain share right now, but that might cannibalize some of the – your other high-end smartphone customers in second half this year?.

Well, so long as – so long or the high-end smartphone continue to grow or so long TSMC has a very high market share. We just do our job to support them..

Okay. Dr.

Sun, can I just have one more follow-up?.

Do you object? There’s no objection, so you may continue..

Thank you. So on the HPC side, also it seems like growth is better than last quarter guidance. I remember it was slight growth without crypto. Now it is high single digit, so also about five percent point higher. I think that C.C. earlier mentioned about is major due to the networking on the 5G deployment.

So is it mainly driven by one or two few customers or several customers across the board?.

In the 5G area, yes, many players. And all of them are now very optimistic. And so the 5G deployment is faster than we initially planned, okay? That’s a trend right now. So we are forecasting higher growth than three months ago..

Okay. So it’s very widespread rather than one or two chip customers? Thank you..

You are right..

JPMorgan’s Gokul has a follow-up question..

Thanks for taking the follow-up question. My first question, I just wanted to clarify. I think last time, we mentioned N7+ could be about $1 billion or slightly higher than that of revenue in 2019.

Are we still seeing that or customers are still staying on N7 for this year?.

We are ramping up N7+ right now, but the revenue for this year is still a little bit less than $1 billion. And as I just mentioned, next year is that one we try to look at it. I will believe most of the customers will adopt the N6 because that’s much easier for them to move into. And the benefit is almost the same as N7+.

So I will say N7+ this year, a little bit below $1 billion. Next year, it probably won’t grow, but N6 will start to pick up..

Okay. That’s very clear. My second question, Dr. Wei, could you explain a little bit more on what you encompass when you talk about heterogeneous integration? I think some of your customers have talked about packaging multiple process technologies in the same package.

I think some of the customers' forward-running researchers even talked about multiple process in the same wafer.

Could you talk a little bit about what is TSMC’s vision when we – when it comes to heterogeneous integration maybe in the next couple of years since you’re starting to showcase the technology and potentially going to production?.

That is a very complex question to be answered. Actually, while working with the customer and – different customer has a different need, but the trend on the heterogeneous integration is what we believe that what we – the few – the future that a lot of customer will adopt.

But because of the benefit that when the circuit at some speed now is limited by the connection from the chip to chip, connection chip to chip is convolution. So that has to be shortened and – to gain the benefit of your single chip as a high performance. So you want to put them together. You better to reserve your signal’s integrity.

You better has a very minimal capacitance, minimal inductance, minimal loss in the resistance. So we – that’s what I say heterogeneous integration become important because we are using the InFO.

We are using the CoWoS to help our customer to integrate all of them together with the most efficient way to connect all the chip together and also extending if you need high band with module that will one of the benefits that using TSMC’s CoWoS or InFO and – so if you ask me what is the application in the future, HPC will be the one that will adopt this kind of process.

That’s the first one to go into. But of course, today, mobile smartphone already adopted the InFO technology as you knew already. And more and more of the high-end smartphone and more and more of the HPC’s customer will adopt TSMC’s advanced packaging method, including heterogeneous integration..

So then we shouldn’t expect that advanced packaging just keeps rising as a percentage of your revenue in a pretty steady manner for the next few years?.

You’re right..

Next question will be coming from Morgan Stanley’s Charlie Chan..

So first of all, we will breakdown by application. It was very helpful. Just – can you give us some clarification. For example, the consumer application on smartphone platform.

Can you give us some illustration for this kind of semiconductors? What is the consumer application by applying the smartphone platform? Or you can just ignore those kind of minor contribution?.

Probably – I – do you have any good answer to that one, the consumer inside a smartphone?.

I don’t know.

You mean the consumer inside smartphone?.

Yes.

Well, if you are using the smartphone to do the gaming, can I say it’s a consumer function inside a smartphone?.

Yes. I think your definition, for example, for GPU in gaming or for AI or for PC, I think that was clear, right, but you – now you provide a more breakdown, we really appreciate. I just wanted to make sure we don’t get it wrong..

Video games is a consumer application now is in HPC and set-top box, digital TV, cordless phone, these are consumer applications now in the digital consumer electronics..

Okay. Okay. So also my next question is about your supply chain management, right, related to your kind of high inventory level, right? So now how is the roll wafer inventory at the foundry.

And do you plan to reduce some shipment from those roll wafer vendors? And also regarding that previous chemical issue, we do get any compensation from your chemical vendors?.

I will answer first part of the question. Our DOI actually including an increase of roll wafer inventory. So on a Q-o-Q basis, it does increase a few days of our own DOI because we have very low first and second quarter and we have a contract with those wafer companies.

But moving to a second half as our demand pick up, those DOI on roll wafer, we’ll gradually digest it to a normal level. This is the first part of your question..

What is the second question?.

The chemical issue caused some damage, right? So will you get any reimbursements or compensation from your – or TSMC will book it as kind of expense?.

So what is our....

Chemical quality....

The photoresist event, yes, and what we do?.

Yes. In terms of financial..

Do we ask for financial compensation?.

Yes..

I have no comment on that one..

Okay. No problem. And also, C.C., regarding your comments about 5-nanometer will have a bigger, larger scale and 7-nanometer because kind of wider applications.

So my question is that besides exceeding 7-nanometer customers and applications, what will be the new customer or application for 5-nanometer?.

We are – actually, we are engaging with the new big customers and they are expanding their product portfolio into HPC area and that part we [indiscernible]. Okay. So that’s why we say that 5-nanometer business probably will be bigger than the 7-nanometer..

Yes. Yes.

And lastly, I guess on M&A, right, because your subsidiary Vanguard acquired GlobalFoundries inch cap early this year, right? So would you consider to do any M&A from those kind of overseas fab at some point?.

We don’t have a plan right now. Of course, if there’s a good opportunity or everything that meet our strategy, we will consider, but we don’t have any plan of M&A right now..

Okay. Yes. And follow-up question to Gokul’s question regarding the profitability, right? So I guess last year in one big event you said GlobalFoundries exceed the leading-edge, right? But if you look at first half gross margin, I think it was much below previous cycle’s margin.

So do you think that your bargain power really improved after this industry consolidation? And how do you think about Samsung’s EUV technology compared to your 5- or 6-nanometer? Thanks..

You’re talking about margin or profitability. Let me say that I think that the first quarter, second quarter’s, most of the [indiscernible] in the 7-nanometer loading. The loading is so low that affect our margin by four points in the first quarter, by three points in the second quarter. So the loading is actually the dominant one.

It’s not because of others. You’re talking about the EUV status compared with my competitor. All I can say is we are very confident that we can ramp-up the EUV right now. And we believe our – the maturity or the readiness of the EUV technology, TSMC definitely is better than others..

Follow-up question from Crédit Suisse, Randy Abrams..

I just have two quick follow-ups. One for Lora on the dividend.

Since you’re moving to quarterly in first quarter approving for fourth quarter this year, next quarter would you declare for first quarter of 2020? And is it the view for 2020 you’ll declare quarterly or will get said amount for the full year next year?.

After the shareholder meeting, we’ll declare the $2, which is the first quarter dividend will be paid in fourth quarter this year. And so every quarter from then, we will declare cash dividend and will be paid within six months. So first quarter next year, you will get a dividend from our board approval in third quarter this year.

So that will continue going on.

Did I make myself clear?.

Yes. That part is clear. And then so every quarter we’ll declare, but is there a goal....

Yes. Every quarter, we will declare dividend..

Okay. And so your goal then for each year to still be stable or can it rise through....

Yes. That’s right. Stable..

Okay. Good. Okay. And then one follow-up just Charlie on the margins. Just relative to the revision you made, sales actually came in a little bit better, but the gross margin came in toward the lower end of the range.

I guess just relative if there were some factors that you saw in the last month that might have affected near term because it looks like by medium term, you have margin getting back toward 50..

Actually, when we gave the guidance on February, it’s a range, right? So we are still within a range. So there are a few factors may have swing the gross margin, photoresist definitely one.

Actually, the actual number was slightly deviated from what we have said in February, but still within the range, okay? Going forward, as I said in my remarks, we are thinking the 50% gross margin is still a good target for us.

Really mean if we can achieve better utilization, we can go back to 50, but it will be depending on each quarter’s demand profile. I’m not ready to give you third quarter and fourth quarter separately, but what I can say is our gross margin will improve in third quarter and we will further improve in fourth quarter..

Thank you..

Now with this very positive note on the margins and also as our CEO said, we have passed the bottom of the cycle for our business and we are launching the industry’s competitive leading-edge technologies. With volume production already taken place using EUV, I think let’s end our conference today with such a high note.

Thank you for coming to our event today, and we hope to see you next quarter. Thank you..