Good morning. My name is Amy and I will be your conference operator today. At this time, I would like to welcome everyone to the PPG Industries’ Fourth Quarter and Full Year 2020 Earnings Conference Call. [Operator Instructions] Thank you. I would now like to turn the conference over to John Bruno, Director of Investor Relations. Please go ahead..

Thank you, Amy and good morning, everyone. Once again, this is John Bruno, Director of Investor Relations. We appreciate your continued interest in PPG and welcome you to our fourth quarter and full year 2020 financial results conference call.

Joining me on the call from PPG are Michael McGarry, Chairman and Chief Executive Officer and Vince Morales, Senior Vice President and Chief Financial Officer. Our comments relate to the financial information released after U.S. equity markets closed on Thursday, January 21, 2021.

We have posted detailed commentary and accompanying presentation slides on the Investor Center of our website, ppg.com. The slides are also available on the webcast site for this call and provide additional support to the brief opening comments Michael will make shortly.

Following management’s perspective on the company’s results for the quarter, we will move to a Q&A session. Both prepared commentary and discussion during this call may contain forward-looking statements, reflecting the company’s current view of future events and their potential effect on PPG’s operating and financial performance.

These statements involve uncertainties and risks, which may cause actual results to differ. The company is under no obligation to provide subsequent updates to these forward-looking statements. This presentation also contains certain non-GAAP financial measures.

The company has provided in the appendix of the presentation materials, which are available on our website, reconciliations of these non-GAAP financial measures to the most directly comparable GAAP financial measures. For additional information, please refer to PPG’s filings with the SEC. Now, let me introduce PPG Chairman and CEO, Michael McGarry..

Thank you, John, and good morning, everyone. I would like to welcome everyone to our fourth quarter 2020 earnings call. Most importantly, I hope you and your loved ones are remaining safe and healthy. Now let me provide some comments to supplement the detailed financial results we released last evening.

For the fourth quarter, our net sales were about $3.8 billion and our adjusted earnings per diluted share from continuing operations were $1.59.

Driven by strong year-over-year sales growth in our industrial coatings reporting segment, we delivered record adjusted earnings per diluted share for the second consecutive quarter, increasing by more than 20% from prior year.

In addition, our global architectural coatings businesses continue to perform exceptionally well, eclipsing prior fourth quarter sales and earnings records in most countries. We also delivered the second consecutive quarter of double-digit organic growth for our European architectural business.

Our global architectural sales were also supported by ongoing advancement of our digital capabilities. In 2020, our global digital sales in the architectural business were up by more than 60%, and we will continue to invest and prioritize in these digital initiatives.

We coupled these organic growth improvements with strong cost management and delivered PPG aggregate segment margins that were about 160 basis points higher than the prior year fourth quarter.

The higher margins were achieved with about 30% of our businesses continued to face significant demand headwinds, most notably the automotive refinish and aerospace coatings businesses as the pandemic continues to impact areas of travel and mobility.

During the fourth quarter, sales in our China automotive OEM and general industrial businesses well outpaced industry demand with both businesses growing nearly 20% on a year-over-year basis. In auto OEM, we were significantly above industry production rates.

Our strong footprint, advantaged technology, and service capabilities continued to serve us well in China where economic growth is the most robust. In addition, sales in our European and Latin American regions returned to year-over-year growth during the quarter. And in the U.S.

region, while still lower than the prior year due to the aerospace coatings business, overall sales improved throughout the quarter. We delivered more cost savings during the quarter with about $40 million of interim cost savings. And we also delivered an additional $40 million of structural cost savings.

Our interim cost savings were lower than the $90 million we achieved in the third quarter as we incurred certain cost to support the sales improvement in several of our end-use markets.

We will maintain about $25 million of these interim cost savings in the first quarter and expect to make at least $80 million of permanent cost savings for the full year 2021. Our team has done an excellent job managing working capital and cash uses in 2020, which allowed us to achieve a record $2.1 billion of operating cash flow for the year.

Our businesses reduced operating working capital as a percent of sales by about 100 basis points in 2020. This outstanding performance was one key factor in allowing us to fund the Ennis-Flint acquisition entirely with cash on hand during the month of December.

In addition, to completing the Ennis-Flint acquisition, we recently announced some other strategic acquisitions. Each of these companies brings incremental benefits to PPG that will lead to further shareholder value creation.

Looking ahead to the first quarter, there are few challenges including more restrictive shutdowns in certain countries and supply chain issues in certain end-use markets that will likely cause some short-term coatings demand disruptions. We’re also experiencing elevation of costs, particularly raw materials and logistics costs.

While these issues create some uncertainties in the first quarter, we continue to be optimistic about the first half of 2021 as underlying coatings demand and economic activity in several of our end-use markets is expected to remain robust, including the automotive OEM, general industrial, packaging, and architectural businesses.

We also remain confident of achieving further selling price increases in the first quarter in the Performance Coatings reporting segment and have started to pursue selling price increases in the Industrial Coatings reporting segment, which will be realized as the year progresses.

For the company, aggregate sales volumes are projected to be flat to up a low-single-digit percentage in the first quarter with differences by business and region.

As we progress through 2021, we anticipate multiple catalysts that will help drive further sales and earnings growth, including an eventual restocked benefit as low inventory levels remain in several of our end-use markets.

Second, we are well positioned to benefit from the ultimate recovery in the automotive refinish and aerospace coatings end-use markets as congestion and air travel increases with our world-class product and customer service capabilities. In addition, our acquisitions will start to provide accretive benefit as the year progresses.

These incremental benefits will supplement the organic growth that we anticipate in our other core businesses as we continue to support our customers with excellent services and technology-advantaged products.

For the quarter, we project adjusted earnings per diluted share to increase by more than 20% on a year-over-year basis, continuing our strong earnings momentum.

Our near-term cash deployment priority will be to complete the acquisitions we have announced, which we anticipate to be funded by a combination of cash on hand and debt by the end of the second quarter.

We then intend to primarily use our free cash flow generation to pay down debt from these acquisitions and reposition our balance sheet for future industry consolidation. As it relates to our recently announced acquisition agreements, let me make a few comments about Tikkurila.

From a strategic perspective, this remains an extremely complementary business to PPG. We don’t expect any significant anti-trust issues and are confident that we will be able to keep the entire business intact. And equally important, we will not need to disrupt PPG’s legacy businesses or our customers in the region.

Keeping the Tikkurila team together as one unit is not only the best stakeholder outcome, but will ensure a fast start on synergy capture. From a strict acquisition integration execution perspective, we believe that our offer is compelling for all stakeholders and it has the benefit of the due diligence we’ve already conducted.

We conducted the due diligence efficiently and worked closely and cooperatively with Tikkurila to resolve to the satisfaction of both parties some commercial issues that arose in the due diligence process.

We believe that these commercial issues in addition to the regulatory landscape place PPG in the most favorable situation to acquire Tikkurila from a business continuity and return -- project return perspective.

Additionally, we’re expecting substantial cost synergies supplemented by incremental sales synergies, which we were able to fully vet in the due diligence analysis. This includes the fact that our holistic European operations are well established and stable and will result in very little disruption from this transaction.

We also have a very well established regional shared service center in Eastern Europe that has been in existence for many years and has integrated many of our prior acquisitions, which will enable us to more seamlessly and more quickly integrate an acquisition of this size.

Finally, we will continue to analyze this with our traditional thoughtfulness and historical discipline. On a post-synergy basis, this remains an excellent value creation opportunity for our shareholders.

Lastly, as we hear from our customers and investors consistently, there is zero doubt that our sustainability initiatives are far ahead of any coatings company as PPG technology is enabling the conversion from the internal combustion engine to electric and autonomous vehicles in addition to our many other initiatives.

Due to where this transaction is from our process perspective, that is we are currently in an open tender offer period and Tikkurila’s Board has received a non-binding competing bid. We will not be able to answer any questions on this matter during the call. In closing, I want to thank and recognize our global PPG team.

Our company’s true character has been showcased during these times of adversity. I am proud of how the PPG team has responded with great resiliency and continuing to serve our customers, our communities and one another and has truly lived the PPG way.

Our fourth quarter and full year 2020 results are a true testament of our company’s capabilities and allow us to enter 2021 as an even stronger company. Thank you for your continued confidence in PPG. This concludes our prepared remarks. And Amy, would you please open the line for questions..

[Operator Instructions] Your first question comes from the line of Michael Sison with Wells Fargo. Michael, your line is open..

Hey guys, nice quarter. I guess maybe let's talk about the acquisitions in total, you've had a really good run here in terms of finding opportunities.

What's sort of the synergy run rate, if all of them come together over the next 6 months?.

Yes Mike, this is Vince. Good morning. Hope you're doing well. We'll give some more information on these acquisitions as they close similar to what we do with Ennis-Flint. We got to get them through closing. We have to -- we will give you some annualized as well as specific 2021 numbers. All of them have a different seasonality profile.

So again, it would be hard to give you a specific number as it relates to 2021. As I think it's well chronicled, most coatings acquisitions have kind of mid-single-digit synergies as a starting target. Some have more, some have less depending upon their overlap, geographic overlap, product overlap.

So again, as we close them, be rest assured it will provide more detail individually per acquisition..

Got it.

And then maybe shifting to architectural coatings, when you -- can you maybe talk about some of the backlogs that your pro painters are seeing, and how big those are relative to what you've seen in the past? And maybe the potential momentum there and whether orange and brown is kind of the hot color that people are asking for these days?.

Well, I'm not going to go into the orange and brown, Michael, but what I will tell you is we -- sub segment, our business here in the U.S is into maintenance, commercial, residential, DIY, et cetera. And if you look at that momentum by each of those segments, every one of them was significantly more positive in 4Q than 3Q.

And each one of them are anticipating being more positive in 1Q versus 4Q. So from that standpoint, we're excited, obviously, permitting for new homes. Construction is not going quite as fast as they wanted challenges on the multifamily side as well. So most of our large painters are feeling very comfortable coming into 2021.

And then when we flip over into Europe, without a doubt, we're still having very strong. You saw we had double-digit growth in the fourth quarter through the first 21 days of January. It's a continuation of that trend as well. And then when you flip down into Mexico, we had an exceptionally strong quarter.

The economy in Mexico, GDP is minus 7% and 8%, and yet we performed at plus 10%. And we see that same momentum carrying into January, the sell out from our concessionaires is strong. Their liquidity is very good and so I'm very positive about what we're seeing in our global architectural business..

Great. Thank you..

Your next question comes from the line of Ghansham Panjabi with Baird. Ghansham, your line is open..

Thank you. Good morning, everybody. I guess, Michael, going back to your comments on pricing and industrial, you referenced some pricing initiatives there to offset higher costs. Looking at the slide deck, you're still expecting kind of stable selling prices for the industrial coatings segment.

So just curious as to is there a lag associated with that? Is that what you're referencing? How should we think about that build as the year progresses? Thanks..

Well, Ghansham, as you know, historically, there's always a 3 to 6-month lag in pricing and raw materials, because we can't raise price until our customers can see it. And it's, as you know, more challenging on the industrial side than the performance side.

And so, raw materials were higher, especially when you think about China, that's a much more spot kind of purchasing environment over there, because that's their tradition. So we saw we have already announced price increases in Europe. We've started to announce price increases in other regions in the world. We are well ahead of 2017.

If you remember 2017, some of our peers were distracted because of either acquisitions or fears. And so, we were -- we are well ahead of that. And so, I'm very comfortable that you're going to continue to see price -- positive price.

We've had 15 quarters in a row of positive price, you're going to see the 16th quarter of positive price for the company in Q1. And so, I'm not worried about the low-single-digit inflation that we're anticipating..

Got it. And then in terms of the supply chain constraints you referenced, can you just give us more color on that dynamic? Which businesses in particular do you see being impacted, the timeline to normalize? I know the world is choppy at this point. But just curious on your thoughts. Thanks so much..

Yes, the two biggest businesses, Ghansham, that are impacted right now are automotive and industrial. We finished with backlogs in those businesses by the end of the December. We're still running backlogs in those businesses. Demand is very strong, but it is very choppy.

A number of our customers are having significant issues with labor because of the COVID pandemic. In fact, we got an emergency call a couple days ago from one of our large automotive customers that their whole paint shop was shutdown because of COVID and could we bring our people in to run it in the interim. So, we, of course, supported them on that.

There's the semiconductor issue that's out there in the automotive space, they all want to run. So many of our customers ran over Christmas, which was quite unusual. So demand is there and inventories in many of these spaces are quite low. Whether you're thinking about appliances or coil or automotive, there's low inventories.

So we feel very comfortable. But unfortunately, we can't predict with labor when people are going to be having full labor contingent to be able to run their plants. .

Okay. Thank you very much. Stay well..

Your next question comes from the line of Frank Mitsch with Fermium Research. Frank, your line is open..

Yes, good morning, and congratulations on the Penguin helmets. That's pretty cool. Looking forward to seeing the game one of these days hopefully in person. We'll see. I wanted to follow-up on the performance coatings margins.

Got a bunch of questions regarding this, the very large sequential decline that you saw from the third quarter to the fourth quarter. Typically, you do see a decline with your businesses in the fourth quarter. But this seems to be a bit abnormal. I was wondering if you could take a moment or two and talk through the details there..

Yes, Frank, this is Vince. It really relates to the weightings of the businesses that are in there. The two most impacted businesses, as Michael referenced in the opening comments that we're seeing from a volume perspective are aerospace and refinish. Those are typically our most stable businesses throughout the year quarter-to-quarter.

Their demand trends don't significantly change by quarter. The other businesses and performance coatings such as architecture are very seasonal. So while we were down 30% in aerospace in Q3, and a similar amount in Q4, same with refinish, they're waiting in queue -- traditional Q4 is much higher.

So, in 2019, it would have been much higher, 2018 would have been much higher as a percent of the total segment. So even though we had good architectural demand and sales in Q4, the fact that that weighting of aerospace and refinish is a heavier Q4 had a bigger impact on the Q4 margins..

Got you. Thank you. And I understand you cannot talk about Tikkurila. But if for whatever reason that transaction doesn't occur, can you talk about your M&A pipeline? Obviously, you've been very active in the recent past.

Should investors expect that there might be other sort of transactions or would share buybacks come back into the fore [ph]?.

Well, Frank, I think you've heard me say this in the fourth quarter back in October, I'll say the same thing now, it’s January. I'll be exceptionally disappointed if we buy back any shares in 2021. Our acquisition pipeline remains robust and remains active and we continue to work in this area.

And so I'm feeling confident that we will have further announcements in the back half of the year..

Very helpful. Thanks so much..

Your next question comes from the line of Bob Koort with Goldman. Bob, your line is open..

Thank you very much. [Technical difficulty] responses and price hikes. Wondering if you could tell me what difference it makes, if any, to the demand environment relative to maybe '17, which is quite weaker.

Is that going to make it quicker, easier and maybe some sense there?.

Yes. Well, I think it certainly make it easier. I don't know about quicker. The benefit we have right now in these industrial businesses is that customers are backlogged. They're asking for products. They're calling on a daily basis, wondering where their orders are in the queue. So that's one thing.

The second thing is they are so desperate for technical help. The last thing they're going to be doing is asking for any price downs, and so they fully recognize that this is a different environment. And so, our salespeople are never happy when we are pushing them out there, tell them they got to go get bright.

But in this case, they have a lot more ammunition to go get price. And I feel comfortable that the industry sees the same thing that we're seeing..

Can I ask you on the refinish market? We get occasional questions from our investors wondering about the secular threat of driver assistance versus the growing car park and introducing new drivers that might bang up vehicles.

How do you see that playing out over the next several years?.

Well, Bob, I would first start with the fact that the car park continues to grow. It grows marginally in the U.S and Europe, but it grows in Eastern Europe, it grows in China. I mean, think about 25 million new cars every year in China and the slow scrappage rate right now in China. Same thing in Eastern -- excuse me, Southeast Asia and India.

So the car park is continuing to grow. And as you know, any kind of autonomous, a lot of these safety features, they're mostly in the developed countries, those things are too expensive to put on cars, and a lot of these other countries. So we don't have to worry about that as much.

The other thing I would tell you is that in the fourth quarter, we -- every time we saw, the economy loosen up and work-from-home restrictions loosen, we saw especially in Europe, congestion come up rather quickly, because as you know, the houses are much smaller in Europe than people, it's much more difficult to work-from-home there.

So congestion rebounded very quickly. Our refinish in the fourth quarter was minus, let's call it minus 10-ish, but claims were down minus 20. So we've made some significant improvements in that business because of the pandemic. And so I think you should feel -- your clients should feel comfortable that we have this well in hand..

Great. Thanks so much..

Your next question comes from the line of P.J. Juvekar with Citi. P.J., your line is open..

Yes. Hi, good morning..

Good morning, P.J..

Michael, what was behind the strength in architectural coatings, especially in Europe, when I think organic sales were up in low teens? Is that driven by DIY? And does DIY face tougher comps in 2021 starting in second quarter?.

Well, there is certainly some significant DIY improvement in Europe. But there was also a significant return to our professional network as well. And we have a very strong position as you know in Europe. Number one in a lot of countries, and so we've benefited from that strength. And the improvement in DIY, I think, is sustainable.

There's a whole lot of new DIY-ers that weren't there, 2 and 3 and 5 years ago. So I think this is a start of something that's good. And the comps do get tougher, but I would say the comps in Europe do not get tougher until the third and fourth quarter. So the second quarter, as you know, had very significant lockdowns in Europe.

And so, Q1, Q2 will still have very positive numbers going into the back half of the year..

And P.J., for Europe, specifically, the professional painters, Michael alluded to, doesn't have as much commercial exposure as they do in the U.S. So they are working on residential and some repaint activities. We're seeing the same in the U.S., but there's a commercial downdraft that weakens the comparables, Europe versus the U.S..

That's really helpful. And then secondly, Ennis-Flint, that seems like an interesting acquisition in traffic paints. I think, Michael, you said that autonomous cars need good road markings. And as a result, traffic pain could be a growth industry. Ennis-Flint has, I think, revenues of $600 million.

How fast can these sales grow, your traffic solutions business can grow going forward. Thank you..

Yes. Thanks for asking the question P.J. I'll let Michael answer the growth question. But, again, let's frame Ennis-Flint. I think $600 million in annual sales is a good target. It is a very seasonal business, as you can imagine. It's predominantly U.S., Canada. So, we are -- we do serve parts of the U.S that have certainly a winter effect.

So we typically see the majority of profitability in Q2 and Q3, given the seasonal nature -- the nature of the business. And Michael, maybe you can..

Yes. P.J, what I would tell you is, the two secular trends that we're paying close attention to is one, the -- some of the states are looking to make the stripes wider. So from foreign stripes, a 6-inch stripe. And the other thing they're doing is they're reducing the distance between the stripes. So that's one.

Plus, the other thing that's interesting to this is that they have a number of pre-formed products. And I think, in thermoplastic products as well, and I think with our network, we're going to be able to help them get better distribution of that products. So we're excited about this.

But I would anticipate this is not going to be a straight up kind of growth. It's going to be a continuation of a continuous growth [technical difficulty]..

Okay. Thank you..

Your next question comes from the line of Laurent Favre with Exane. Laurent, your line is open..

Yes. Good morning. I was -- that's -- I've got another question on Ennis, on the international expansion. I was just wondering if you could frame for us, what you have in lines.

Are we talking about significant cost increase to try and become a, I guess, material competitor outside of the U.S and Canada?.

Well, it definitely will not be a material cost increases. You may have heard making traffic paying is not as sophisticated making our industrial paints. And as you know, in Mexico and Europe, we have a number of plants. So it will not be a cost issue.

It will be a focus and distribution issue, making sure we get ourselves aligned with the winners in the contracting space that consistently win government bids and municipality bids and things like that. So that's where our focus will be. So Mexico will be a start because of our strong base with our PPG-Comex. Team.

And then we'll look at it on a country-by-country basis in Europe, and do it in a very methodical and disciplined manner..

Thank you.

And then Michael, I think in the slides you talked about ESG benefits for all four acquisitions? Could you give us a few examples?.

Yes, I'm happy to and John can chime in as well. So, if you think about the first one, Ennis-Flint, this is going to help the autonomous driving help the mobility. So as I mentioned in my opening remarks, PPG is far ahead of everybody in this space. So that would be the first one. The second one would be VersaFlex.

I would tell you that with VersaFlex, the polyurea technology, if you think about flooring systems, food plants, what you want to do is ensure the cleanest environments that you can and reduce the potential for illnesses in those environments. And that's another ESG benefit.

Worwag, I would say the number one thing with Worwag is they have some really nifty technology in the area of automotive parts water-based. And so as you know, we've been trying to push the industry to move much faster away from solvent to water. That's one plus.

We anticipate with a full suite of products, we'll get more people switching to powder, which as you know, it has 100% transfer efficiency. And then I think our remarks on Tikkurila are quite clear.

Not only will we bring our technology to that space to continue to drive more bio base, more sustainable raw materials, but also will be more water-based solutions, especially when I think about what they have in Russia and other Eastern European countries..

Thank you..

Your next question comes from the line of David Begleiter with Deutsche Bank. David, your line is open..

Thank you. Michael, just on the Q1 guidance, typically Q1 is about 15% above Q4. I think this year guidance was down about 6% to 9%.

What are the key drivers for that divergence from historical patterns?.

Yes, David. This is Vince. Hope you are doing well. I think the typical seasonality due to the pandemic is very hard to match prior years. We had a strong push from -- activity from Q3 into Q4. As Mike alluded to architectural had a high -- higher seasonal sales in Q4 than we would traditionally see in Q1.

We do see some concern about availability of customer production lines. So we do feel some of the activity will flip from Q1 into Q2. Just to give you a point of reference, David, you typically see about a million car drop off in global auto production from Q4 to Q1.

We're expecting 2 million cars globally, excluding Japan, 2 million cars globally drop off from Q4 to Q1. And that same type of pattern exists in some industrial businesses. So I think it's difficult from a seasonality perspective to compare historically due to just shifting around associated with the pandemic..

Got it? And the same -- kind of same question, just looking at performance coating volumes, I do have an easy comp. It was down 6% last year. I think you’re still guiding it to be down year-over-year.

Why would it not be at least flat or even up year-over-year from performance coating volumes?.

Yes, the first quarter last year didn't have had virtually no impact from aerospace, in terms of volume decline, and refinish was fairly strong until the tail end of March. And those two businesses, as Michael said, in the opening commentary, are heavily impacted in Q4, and we expect consistent patterns in Q1.

So those two businesses are big businesses and that [technical difficulty]..

[Technical difficulty] comes from the line of Jeff Zekauskas with JPMorgan. Jeff, your line is open..

Thanks very much. You're not providing financial guidance for 2021. But there’s -- surely there must be internal targets for management compensation.

Can you give us an idea of what performance objectives there are for the company? And what targets you have in order for people to reach those goals?.

Yes, Jeff, this is Vince, again. We have the traditional targets established that we would in any given year for management compensation, and also salesperson compensation. Obviously, 2020 was very fluid. 2021, we think will be very fluid.

Similar to every other company, our comp committee or Board will look at the fluidness and react accordingly based on their judgment. But we do certainly have internal targets established today for 2021..

Okay. Propylene settled up $0.12 a pound yesterday.

Was that something that was included in your vision of raw materials, or raw material inflation for this year? Or was it larger or smaller than your expectation?.

You said propylene, right?.

Yes, I did. Propylene..

Yes. So, obviously, we don't buy propylene itself. We buy propylene derivatives, and the way the propylene derivatives work it's also driven by supply and demand of the underlying derivative plus the raw material input. So that would not hit us right away. So that would be the first comment.

The second comment is, we have anticipated raw material inflation into 2021. So we were readjusting in a lot of our formula and buying strategies in 2020 to anticipate higher increases and try to position ourselves that minimize the impact of those kind of fluctuations..

Yes, Jeff, I'll add that we are seeing this low single-digit inflation coming into the year. Some of our suppliers are dealing with some of the same issues that our customers are, which we feel some of that's transitory they're having workforce restraint due to the pandemic.

So we think as the year progresses, some of these limiting items will fall by the wayside. We know there's good supply out there in most of these markets. And as Michael just alluded to the supply-demand characteristics of our supplier base, at some point will be the predominant factor of pricing..

So you don't think you're going to be squeezed this year? Is that the conclusion that we should draw?.

We think low single-digit is -- low single-digit inflation is our forecast for Q1 and likely Q2..

Okay, great. Thank you so much..

Your next question comes from the line of Chris Parkinson with Credit Suisse. Chris, your line is open..

Thank you very much. We do saw job managing costs throughout the pandemic, but it's only one they're just -- even on this mid Q&A, there just appears to be this balancing act between improving volumes, your ongoing cost programs, price costs and even mix on an intersegment basis.

Can you just discuss your own thought processes on the margin framework, not only in '21, but into kind of '22.

And how investors should be weighing each of these variables? Is it basically just control the controllable on your cost programs and price, or is there any -- are there any other things you could do to continue your progression? Thank you..

Yes, Chris, this is Michael. I would tell you that the PPG weigh as we do better today than yesterday, every day. And that's how we are managing our -- that's historically been a continuous improvement mentality that we have for the company.

And so that's why we said in the first quarter, we would still have cost initiatives, even though volumes continuing to go up. We are holding our teams accountable continue to drive productivity. We know that there is going to be continued cost savings from a, let's call it, travel. That will be one. How we manage internally.

Technical services that we are providing to some of our customers, we are going to be providing that electronically. We have more digital initiatives. So I think there is -- when I think about long-term, I think it's going to be less expensive for us to make paint long-term than it is today. And we have more productivity initiatives underway..

Got it. And then you mentioned a few times in your prepared remarks just the potential for a robust restock, which could be a solid tailwind in '21. Can you just quickly comment on what you're currently hearing from your various customer channels? And perhaps, also comment on just expected timing. Thank you very much..

Yes. The two biggest ones that we will have to restock; the first one is refinish. So they're all running with an exceptionally low inventories. They don't want to get caught with work-from-home and extended work-from-home period where they can't move product. So that's the first one. But more importantly, aerospace. We see our orders dropping.

I mean, I won't get into the various sub-segments how much we break it down into sub-segments, but I had one in the fourth quarter that we only got 6% of our normal orders in the fourth quarter. Now clearly the industry is running much higher than that. So continue to destock at a significant rate. That's going to have to build up.

So we're thinking about how do we ensure that we're ready for that restock that will be coming in aerospace and that will be significant. And I'm thinking that people are going to start doing that probably starting in the back half of Q2 and then it will start to accelerate.

You probably saw the announcement from Airbus today that they’re increasing their build rate for the A320. That's the first sign. And there will be other signs I think you should anticipate because obviously we're talking to our customers, so we have information that they haven't made public, but that's the first one..

Yes, Chris, and if you go over to the Industrial segment, we know the car inventories in the U.S. are at very low levels relative to historic terms. Many of our industrial customers were running hand to mouth with backlogs to their customers.

And if you look at our balance sheet as a microcosm, our inventory levels are very low and we do have certain stock outs just because we can't get product in certain places. Again, all pandemic-related. So we do expect there to be a restock across a variety of industries as we progress through 2021. That was another example.

Most of our customers had a very strong year last year in 2020, as did we. But again, it depleted inventory that would traditionally be on the shelf..

And maybe to put that in perspective, Chris, we ran our stain plant in December. I can never remember in my history of us running a stain plant in December..

Great color as always. Thank you very much..

Your next question comes from the line of John Roberts with UBS. John, your line is open..

Thank you. China began shutting down in February of last year. So you start to see some benefit here in the first quarter and then your comps get pretty easy as we go into the second and third.

If I look at the 2-year comp instead, and if I look back to your first quarter of '19, it looks like you're relatively flat in the first quarter versus 2 years ago even with the acquisitions.

Is that kind of the right way to think about that still on a 2-year basis, China is going to be okay on a 2-year basis, but a lot of markets are still down that's there.

And so you're going to be -- maybe in the first half you're going to be kind of flattish on a 2-year basis?.

You're talking China only, John, or are you talking total PPG?.

No, for the total PPG. So total PPG first quarter of [multiple speakers] ….

Yes. Total PPG -- for total PPG on a 2-year comp basis, sales volumes will be down low to mid-single digits still with the guide we gave. Now there is other positives such as acquisition, currency is favorable.

As Michael alluded to, we had 15 straight quarters of pricing, but sales volumes on a 2-year stacked basis will be down low to mid-single digits..

Okay. And then you talked about propylene. Maybe a little bit more granularity on the overall raw material inflation.

Ethylene derivatives like VAM, urethanes TiO2, they're all different value chains that's there and many of them are not propylene-linked?.

Yes. I mean, we break down our procurement into about 10 different categories. And in 4Q, I would say that the vast majority of them were slightly negative or flat. When we look at 1Q, we are going to see probably half of them have marginally higher, so inflation. But we are not seeing some significant step up that we are not prepared for.

So sequentially, isocyanates are up, epoxies are up, packaging is up, of course solvents are all up.

But we are not nervous about this, I guess is what I'm trying to tell you because we anticipated this going into the year and we tried to have our procurement strategy in a manner that we would be able to take advantage of what we had in 2020 and try to carry that forward into 2021..

Okay. Thank you..

Next question comes from the line of Vincent Andrews with Morgan Stanley. Vincent, your line is open..

Thank you and good morning, everyone. If I could just ask on the auto production, there may be some other customer areas where there could be some issues in the first quarter. Vince, I think I heard you say that on the auto side you'll see some autos get shifted into 2Q.

Are you anticipating that the shortfall in 1Q would be made up entirely in 2Q or to be spread further out into the balance of the year? And is it something that can be fully made up in the calendar year?.

Vincent, this is Michael. I would say the biggest unknown in that is what have the auto guys decided to do with their own dealers. As you know, dealer inventory is very low. Dealers are happy right now because you come into an auto facility and you don't have a lot of choice and you have to buy what's on the lot.

They're making money on new cars, which is historically something they don't do. So I think the great unknown is due to car companies starting back half of 2Q and 3Q, do they try to rebuild inventories back to the old levels on the dealer lots or do they keep doing what they're doing now. So I think that's a big unknown.

So we are anticipating catching up. But there is still more latency there if they decide to go back to the old inventory levels they used to have..

The one constant, Vincent, is there is demand out there. There is very strong demand in the U.S., a good demand in Europe. The China numbers I think came out today and car sales are up over 20% for January year-to-date. So we know there's good end market demand out there for automotive..

Thank you. That's very helpful. And just maybe on China aerospace, you noted that it's back to -- or I guess, flights are back to 90%.

So when you look at -- if we take that business as sort of a case study of how the rest of the world aerospace might come back, are you seeing anything different in customer behavior as the aerospace recovers in China? Are they buying more, are they buying less? Pushing anything out, plan anything forward? And anything that’s interesting that might help us sort of frame how the U.S.

and Europe and so forth will come back?.

Yes, Vincent, what I would tell you, the first thing to remember it's a two-stage recovery. So domestic flights are up 90%, but international flights are down 85%. So they're not flying outside of China. So -- and they're really limiting anybody flying in. So that's the biggest challenge right now.

So I'd say the number one factor to look for in the recovery is the vaccine distribution and people opening up their borders. So I would pay real close attention to those. Right now their demand on domestic side, they are buying product and they are happy and their inventory levels are, I would call, normal..

And Vincent, if you could just expand out some of the other metrics we watch. We do see online inquiries for airline travel, online inquiries for airline travel are up significantly versus a very depressed level. In Q3 and Q4 they were up. They continue to trend upwards. We did see around the holiday periods, both in the U.S.

and Europe, sizable step change in travel, whether that was wise or not is debatable. But we do know there is demand out there for folks who want to travel, and we are welcoming obviously the positive impact from a vaccination..

Thanks very much, guys..

Your next question comes from the line of Arun Viswanathan with RBC Capital Markets. Arun, your line is open..

Great. Thanks. Good morning. I guess, I just wanted to get to the margin question again. In Industrial, obviously, you've had some nice progress here, even in a challenging market.

Do you feel like you're fully caught up from prior inflation as well? And do you expect further percent margin growth as we go through '21 and you realize some of these price increases that you've put up there? And maybe you can also comment on performance as it relates to your percent margin trajectory? Thanks..

I would say that my answer to that, as always, we have never caught up. We always have a higher expectation in that area. And so we have more work to do. The good news is, demand is strong and people can see raw materials are coming up. So we should be able to get ahead of the curve on this one.

As far as performance, we -- as you know, we’ve already announced price increases in architectural, we’ve announced price increases in refinish and we have advantaged technologies in aerospace so that whenever demand comes back, it will be a positive for us. So I think we are feeling pretty good in this area..

Yes, Arun, let me just add. I think as you've heard us talk throughout all of 2020, due to our discretionary cost management and due to our structural cost improvements that we've made the past several years, we expected very strong leverage on any volume improvement. I think that you witnessed that in Q4 in the Industrial segment.

Volumes were up mid-single digits and you saw the impact it had on the bottom line. So as this volume -- as the pandemic volume recovery occurs throughout, we hope the balance of 2021, you should expect very strong leverage in both segments..

Okay. That's helpful. And then maybe you can just provide either kind of a returns profile for the acquisitions in general.

Is that kind of like a mid-teens ROIC? And maybe that's why you don't necessarily think share buyback would be of the same ROIC or what’s kind of the calculus into not necessarily pursuing share buyback and pursuing M&A a little bit more aggressively?.

If you look and I think we’ve put something out a couple of years ago with regards to our acquisition record and the returns around that, I think we had a dozen or so recent examples. I think it was May of 2019 we put that or 2018. What you'll find is the return on capital for not only PPG, but the coatings industry.

And the IRR for these transactions is typically well in excess of our cost of capital and certainly in excess of a share repurchase. And it's really driven by the fact that these are typically very highly synergistic transactions. A lot of those synergies come with no cash out the door on behalf of the buyer. So you get a very good return.

And these are typically low risk because we're typically not acquiring a lot of assets. As you're well aware, Arun, the coatings industry is asset-light. So we're typically acquiring very few assets with a lot of synergy potential. And we at PPG have been very good at extracting those synergies very early.

And we've done 50 or 60 acquisitions the past 10 years. And those acquisition timelines are typically less than 24 months. We are able to extract all of those synergies, again very, very -- with very few cash out the door.

So those dynamics typically lend themselves to a higher return profile in our space, in the coating space, for acquisitions versus share repo..

Thanks..

Your next question comes from the line of Kevin McCarthy with Vertical Research Group. Kevin, your line is now open..

Yes. Good morning, everyone. My question relates to architectural DIY coatings. How would you compare your outlook for 2021 in the U.S. versus Europe? Maybe you can talk through what you are hearing from some of your channel partners in general.

Things like, inventory levels, seasonal effects and whether or not you can grow the business directionally versus more challenging comparisons this coming year?.

Well, Kevin, I would say that DIY in the U.S. will continue to grow. What I'm most excited about is the fact that we have a new generation of DIY-ers that we didn't have. We always kind of bemoan that in the past because people our age seem to let their kids get by without painting every summer.

So now they are out there painting their own homes as they work-from-home. So that's a positive. The housing stock will continue to grow. That will be a positive. So I think that's all-important trends that you should be paying attention to in Europe.

I think we went through a long period of time where there wasn't as much repair and remodel inside homes that historically has happened in the U.S. that now that people were at home and looking at those same four walls all the time has manifested itself in some very significant numbers.

So I think this is going to last longer than a lot of people think. Obviously, we will wait and see. But I know Q1, Q2 will all be positive comps. And let's wait and see how we trend into Q3, Q4, but I think long-term, these are positive trends for the DIY industry..

Yes, Kevin, I'll add one positive trend. In the U.S., the de-urbanization that's taking place moving from smaller square footage into a single-family home, typically favors repaint, residential paint, repaint and typically favors a more robust painting cycle with more velocity..

Okay. That’s helpful. And then I wanted to ask about auto OEM. Michael, in your prepared remarks, I think you've pointed out you're growing significantly above industry production rates and your heat map shows above average in Asia and EMEA.

Can you elaborate on what is driving that? And how much is related to say share shifts versus some of the dislocations? You mentioned around SMEs labor and low inventory levels..

Well, the first one that we have is better technology. So we are winning -- so if you look at our new wins year-over-year, our net new wins, that has been a very positive number for us. The second one has been because of the pandemic, now the value of our tech service team is being paid out in space.

I mean, people are just saying, wow, this is really important, I need you guys in here. And so we are getting that discretionary piece of business. And the third one is, we are very, very early stages, but we are starting to see the mobility wins start to pick up.

And that’s long-term where I think we are going to divorce ourselves when the build rates is -- because we are going to continue to win in this space..

Just one other I'll add as well, Kevin. If you look at some of our acquisitions in the past couple of years, we did the Hemmelrath acquisition, we've got Worwag acquisition pending. We've solidified many of these customer relationships on ancillary products as well. So that’s been our strategy to expand our technical breadth with customers.

The value-add to those customers. And as Michael mentioned, that’s coming through in spades especially in times like this where they need velocity through their plants..

Perfect. Thanks very much..

Your next question comes from the line of Mike Harrison with Seaport Global Securities. Mike, your line is open..

Hi. Good morning. Wanted to ask about the M&A activity.

If you've got four deals brewing, and it sounds like you have some additional deals maybe in the pipeline for the rest of the year, at what point do you start to get a little bit concerned about your ability to integrate several acquisitions at once? How do you think about that?.

Mike, let me just tell you that about 2 or 3 years ago, we had six going at once, and it was not even a blip on the radar. We have done 50 acquisitions in the last 10 years. We have so many people in PPG that clamor to be the integration director. It's a highly prized job in the company.

We have a well-worn playbook, dog-eared pages left and right, and this is something we do. And if you think about what we’ve going on right now with these acquisitions, PMC is a VersaFlex, you got Tikkurila will be in architectural, you have Worwag, which will be in automotive. I mean, so they're in different businesses.

So I'm not worried about -- Ennis-Flint is a completely new business. So for us, this is not a challenge yet. So, I'm very comfortable in this space..

Yes. Mike, that is a great question. It's something we know at some point could be a governor of what we do. But given the diversity of these acquisitions, we are not at all challenged at this point with bandwidth..

All right. And then on the auto OEM side, you've referred a couple of times the semiconductor shortage issue. And I don't think that you've specifically given some details or some thoughts on whether you think that’s going to be a significant headwind or whether it's a lot of headline risk right now rather than really impacting production rates.

Can you give some thoughts on that please?.

Yes, Mike, I think this issue is well-known in the industry, not only in automotive, but several industrial markets. Anything that requires a chip, like refrigerators, washing machines and it's intermittent now. There is production lines that are up and down based on availability.

It's too hard for us being passive to that supply base to understand the depths or when it may resolve itself. We know it's extremely tight. We do see customers taking down lines, one or two or three days just because they don't have availability.

There is reportedly more supply coming or more ability to supply come, but we don't know how prolong this will be. It's not -- it's still in the single digits in terms of its impact on most of these markets, single-digit percentages that can grow or shrink. But at this point, it's a developing story..

Mike, what I would add to that is, they're missing chips on Thursday, Friday and they get them on Saturday, they're running Saturday, Sunday. They're making up any day that they can. So they're running hand to mouth is basically what it is..

All right. That's helpful color. Thanks..

Your next question comes from the line of Jaideep Pandya with On Field Research. Jaideep, your line is open..

Thanks. First question is on acquisitions topic. I guess, you guys have been doing a lot of acquisitions in the last few years. Now this company from Europe apparently also wants to stop buybacks and do some acquisitions or they are planning to at least.

So, do you feel that in the next sort of coming quarters and years, as more coatings companies are looking for inorganic growth, the multiple of -- the average multiple in the industry is going to sort of eek up, and therefore, return profile on the acquisition pipeline may actually go down or do you think this is on a case-by-case basis, and therefore, it doesn't concern you? And then the second question really is around your Performance Coatings business.

From my point of you, it was a phenomenal year 2020 given arrow and refinish was down that you guys almost ended year flat. So just curious, has structural profitability in DIY Europe, U.S.

and Mexico improved and you can keep it there or was it a bit inflated because of these interim cost savings that you had, and therefore, shouldn't get carried away? Thanks..

Well, let me first start with the -- I think you might have exceeded our two-question limit. The returns in acquisitions are really unique to that acquisition. And who you compete with is really unique in that space as well. So there is no right or wrong answer.

You know the general theme is that for -- the higher the risk, the higher the return needs to be. And so -- and the more unknowns, the higher the returns need to be to cover that. So I would say it's just varies considerably and there is no right or wrong answer except we know that discipline is always the right answer.

From a performance standpoint, I do think we have lower structural costs going forward. And I do think, like Vince mentioned earlier, the ability to this additional volume when it comes in really leverages itself to a nice return on the bottom line, and I think that's going to continue..

Yes. I think, Jaideep, as we've talked over ….

Thanks a lot..

… as we talked over the years, the coatings models are variable cost model. So even though volumes are down, we are able to ratchet down a variety of cost factors, that's been proven once again in 2020, especially in Q2 and Q3. So we could ratchet down variable cost.

And then we’ve maintained some of that, as Michael alluded to in the opening comments, carrying into 2021 that we hope to make permanent..

Great. Thanks a lot, and good luck on Tikkurila..

Gentlemen, your final question comes from the line of Daniel Rizzo with Jefferies. Daniel, your line is open..

Hi, guys. I'm on for Laurence. Just a couple of quick ones.

You mentioned all the M&A opportunities, I was just wondering if there is an upper limit on the leverage you are willing to go to make these acquisitions?.

Yes, I think our history has been well chronicled here as well, Dan. Look, we want to be a strong investment-grade company. There are times where we lever up to do a transaction or set of transactions. Our intention would be, as Michael said in the opening comments, to immediately ratchet that back down to poise ourselves for the next acquisition.

Given the different sizes and natures of these deals, it's hard to pinpoint a specific number, but again, strong investment grade is where we like to live..

Okay. And then quickly, you mentioned that some of your customers were running over Christmas, which was obviously unusual.

I was wondering if that's possible you might see the same thing in China for the Chinese New Year where just, I mean, those trends might continue in the last year the pause you usually see around this time of the year in that region?.

We will let John Bruno answer that because he spent four years in China.

So, John, what's your view?.

Dan, I fully expect them to take their holidays..

Okay. Thank you very much..

You are welcome..

There are no further questions at this time. Mr. Bruno, I turn the call back over to you. End of Q&A.

Thank you, Amy. I would like to thank everyone for their time and interest in PPG. If you have any further questions, please contact our IR department. This concludes our fourth quarter earnings call. Have a good day..

This concludes today’s conference call. You may now disconnect..