Good day, ladies and gentlemen. Welcome to Nano Dimension’s Full Year 2023 Results Conference Call. My name is Scott, and I’m your operator for today’s event. On the call with us today are Yoav Stern, CEO and Member of the Board of Directors; Tomer Pinchas, CFO and COO; and Julien Lederman, Vice President of Corporate Development.

Before we begin, may I remind our listeners is that certain information provided on this call may contain forward-looking statements, and the safe harbor statement outlined in today’s earnings press release also pertains to statements made on this call.

If you have not received a copy of the press release, please view it in the Investor Relations section of the company’s website. A replay of today’s call will also be available on the Investor Relations section of the company’s website.

Yoav will begin the call with a business update, followed by a question-and-answer session, at which time the management team will answer questions. I would now like to turn the call over to Nano Dimension’s CEO and Member of the Board of Directors, Yoav Stern. Yoav, please go ahead..

one is material and process, because without the right materials and process, there’s no printing and not proper printing of products in mass manufacturing; and the second is the design software for those printers, not design. We’re not going to replace electronic design software or mechanical design software.

We are adding the software that enables the designers to use advanced printers. But eventually, once they do that, the software is what will be in front of them. By the way, AdditiveFlow is another company we bought, which is part of this sophisticated software that enables the design and the finite element analysis of every design.

Next slide is the growth. This is back to numbers. This slide shows every column is the last 12 months for that date. So if you look on the left, first column is Q4 2020, which means it shows the full year 2020 results as it was the year I joined and corona joined us as well in the same year.

And if you look at the column on the total right side, on the extreme right side, it shows Q4 2023, which means it’s the result of the last 12 months until that date, which means full year 2023, which we’re reporting today. And you see the growth, it speaks for itself. It’s a very unique situation.

There’s no company in our business domain that is showing this over the last 4 years. Next slide is, finally, we get to the chapter that will speak about our "industry." What you see in this slide is Nano’s growth comparing to we chose 4 peers here, 5 peers actually.

You see that during 2023, every one of our peers has lost revenue comparing to the year before. We are the only ones that not only growing, but growing leaps and bounds. Now, why is it not an industry? This is not industry players.

Let me explain to you a very, very important point here that I think our patriots are missing, be it Markforged, Stratasys, Desktop Metal, 3D Systems, or the average. Actually, it is four competitors and one average, not five, I’m sorry, but there is probably 5, 6 more public competitors. They are not really competitors.

They are participants in our business domain. We don’t see them in front of customers. We don’t see them competing with us. And the reason is it’s not really an industry. This is a business domain of companies that use similar technologies to manufacture or produce, call it, parts or items, similar technologies, not the same.

Some use additive manufacturing in 3-dimensional polymers, FDM as an example; some use DLPs, some like us use additive manufacturing electronics by inkjet for PCBs. But the reason it’s not an industry is because an industry is set by who do we sell to? And we sell to vertical markets that are different, some overlap.

But an industry, for instance, is a space industry, or the industry is aviation, or the industry is medical, and others, electronic cars or just automobiles, or the energy industry. Those are industries. We are in the business of selling machines to different industries.

So you cannot say there’s a headwind in our industry because, for instance, the defense industry didn’t have headwinds this year. So all the competitors are saying they’re shrinking because there is headwinds. There is no headwinds.

There is just, for one reason or another, their revenue in selling into different industries has shrunk, either because the industry is not big enough, or the market is not big enough, or because there were some issues with the sales and marketing, or the product does not fit as a product market fit.

But there is no industry headwinds when you speak about additive manufacturing. Additive manufacturing is a bunch of technologies that are all acting in the same business domain. And the business domain is where we develop and manufacture the materials and the machines. We sell it to different industries.

In a certain situation, the defense industry may have a headwind, and our sales in defense will shrink. Not the case today. It’s actually the opposite. In our case, we are selling to the electronic industry.

Electronic also is a domain, because electronic exists in computers, electronic exists in space, electronic exists in medical, electronic exists in everything. It’s not an industry. It’s a business domain. So I overspoke about this, and I hope people understood it. And that’s the justification for my claim. There are no headwinds.

People who sell, like our competitors, to the dental industry, which is an industry, may have headwinds in the dental industry and may not. But what is that to do with defense? Okay, next slide is reshaping Nano Program. In spite of us or our growth, we decided to reshape Nano, and that’s to do with expenses, cut expenses in a very dramatic manner.

We did it in the second part of Q4 2023, which means only one quarter ago, and we reduced between $25 million to $30 million in our annual cost. Our cash burn, look at it in the last 3 years.

It’s going down from where we were in the midst of development of everything we’re doing today, into 2023 which has went down almost by 50%, and it goes down now into ‘24 by almost 80%. And I’m talking now about Q1, which is already in the pace that we’re discussing.

Obviously, the rest of the year is ahead of us, but we expect to be between $12 million to $20 million, $24 million in the worst case, cash burn. And that’s considered the fact that we have $1 billion in cash. It’s not even a variable insomuch as our survivability or ability to grow, our ability to deliver value to the shareholders.

Because we are very well financed. If we end up with $10 million, 12 million cash burn a year, with $1 billion in cash, which is going to be used for acquisitions and for R&D, we’re in an excellent, excellent shape.

Having said that, I don’t want to go back on the slides but every entity in this business domain that I described to you is losing cash and not having cash to lose more. So let’s speak again a little bit about the environment of our business domain. There’s about 10, 12 public companies in this business domain.

Some of them are large organizations like HP and General Electric. But if you summarize this industry, the claim of all these analysts is the industry is $15 billion, give or take, growing to $30 billion in 2030. Well, first of all, it’s not an industry again, because it’s combined from 10 different industries that are growing or not growing.

Does our business domain grow? Well, let’s speak about which business domain we really are. We are manufacturing machines and materials. Out of these $15 billion, there’s no more than $2.5 billion of companies like us, and it’s growing.

But all of them are losing money, maybe other than one or two, which I, which are private, so I don’t know the exact numbers, but I have an estimate based on talking to them.

And all the publics are losing money, and all the public companies have no more cash for more than, at the best case, a year and a quarter in one case, and all the other cases are less than half a year. So there’s no surprise where the shares are traded. The only surprise is why are we traded below our cash. But that’s a different story.

Next slide speaks about the replenishing and of the stewardship, I would prefer to call it corporate governance, replenishing our corporate governance and capital allocation. Corporate governance is, as we grew, becoming more and more serious company rather than a small public company like a biotech that is mostly focusing on technology.

We start to focus on corporate governance, on the fact that we have to fit the corporate governance to the size and growth of the company. We split the roles of me being a CEO and a Chairman, which was not something I liked anyhow, because there was no choice when we were smaller in the corona days. We brought Dr. Yoav Nissan-Cohen.

He has a great background in the semiconductors industry and the ex-CEO of Tower Semiconductors. We refreshed our Board membership by reducing it by 2 people that we requested to leave because they were not fitting a serious professional organization in an American market.

But we have replaced them with a 4-Star General Garrett, the ex-Commander of the U.S. Army Command, with a lot of experience in very large organizations. On the capital allocation side, we did not buy large companies, not because we didn’t negotiate, we did, but because the prices were not right.

So we got to the point today where the prices are becoming right because of what I told you today. All our competitors are basically having reduced time and very strictly defined time to live if they’ll continue to lose cash and have no cash, and if they will raise money, they will dilute the existing shareholders.

So while we had the cash and didn’t spend it, we decided to spend close to $100 million to purchase our own shares at below the cash value, which improves the company’s balance sheet and enterprise value.

And we approved for ourselves another, above the $96 million which we already spent, another $200 million of potential buyback, which, if we use it will be when the share is traded below cash value; at this point, about 25% below cash value.

And the Board will balance its decisions about the use of capital between acquisitions, buyback shares, and investment in R&D, and go-to-market, in order, at the end of the day, to have enough cash to bring value to the share as expressed in share price and as delivered to the shareholders. That’s our plan for the next year.

At this point, I spoke enough, 20, 25 minutes. I would like to give the baton back to Scott to manage the Q&A session..

Thank you. [Operator Instructions] And our first question today comes from the line of Ashok Kumar with ThinkEquity. Please go ahead..

Alright, thank you for taking my questions. The first question is broadly in terms of your cash burn and reshaping Nano. So you have the $15 million quarterly run rate, 50% gross margins, $1 million burn per month. So what’s your path line to profitability? wo is capital allocation.

I think you talked about $1 billion and cash generating about $4 million a month in interest income. And can you talk about strategy beyond cash buyback? The third question is, you talked about business domain. Specifically, you talked about material process on one hand and design software on the other.

So do you have the capacity in-house at this point to be an industry leader where you forecast the industry to be some years from now? And the last question is on the industry, right, which is business domain versus industry, you make the distinction there. Clearly, you don’t want to be the last man standing.

You talked about continued burn rate and lack of balance sheet support with your competitors. And industry is critical because it’s more than the sum of the parts. And so where do you see the industry also over the forecast horizon. Thank you..

Okay. I counted five questions. I frankly didn’t understand the fifth one, but let me answer the first four. And if after the first four, I didn’t answer the fifth in between, then, of course, I’ll let you ask it again. And thank you very much for your questions.

First of all, if we burn $1 million a month, or between $1 million to $2 million a month, it will be the lowest cash burn this year that we had. It’s not going to be the target to stay on.

Profit will come, and cash flow burn will go to zero or start to generate cash we believe in 2025, and it will be dependent on two variables that are complementary to each other.

Either we increase our gross margins to around 60% with no acquisitions, then we’ll be profitable and cash flow generating, or we do the acquisitions we are planning and negotiating, as we speak, because the price will be right, use some cash from, of course, the cash we have for the acquisitions, and then being bigger will enable us, depends on the specific acquisitions, to be profitable even in less than 60% gross margin.

That said, being profitable means while continuing to invest in R&D and continuing to develop both materials and process and the software that I mentioned before. First of all, I do want to be the – not the last man standing, but the first leader standing. And in order to do that, I have to have the profitability.

Now, the profitability doesn’t only mean that there’s a positive EBITDA, earnings per share, profitability that comes from gross margin, means I have enough money to spend on R&D to stay ahead of my competitors.

And at 60%, in around $100 million of revenue, between $70 million to $100 million, we can be profitable and invest in R&D and grow because of the competitive edge we’re creating. And at more than $100 million, if we do the acquisitions, it will be much more.

You can actually do it with gross margins that are a bit lower because you have synergies between the businesses, and you continue with these gross margins to be able to deliver both profits to investors and enhance value and to continue R&D to enhance competitiveness. And that’s much beyond buyback.

The cash buyback is as temporary as it may be, and I am not for cash buyback in principle. I am in cash buyback only in very unique cases. I’m against cash buyback for a company that’s growing the way we are growing, and we will grow. When do you do cash buyback? Probably one or two cases.

One like cases like us, for some reason, the share is traded below the cash value. And the second is you have so much cash on the balance sheet, and you’re profitable, and the cash is growing, i.e.

companies like the gentleman from Omaha or companies like Apple that have $160 billion, if I remember right, or something like that, I don’t remember the exact number.

And then when you have so much cash, and you don’t use it, buying your shares depends on its price from your profit is something that makes sense because you’re improving the value on a per share basis by reducing the amount of shares that’s traded.

And your fourth question is our capacity to stay as an industry leader or to become an industry leader? Our capacity to do that will come through very smart acquisitions.

And in order to be smart in acquisitions or acquisitions, I should say by now, the other side that is selling has to be smart enough to realize that they have to put egos aside if they want to be the right stewards for their shareholders.

And this business domain is so full of egos that through the SPAC mania of last year and the years before, the companies got to the point where all of them went down from $10 a share to less than $1. All the public companies that came from SPACs, and they stayed still doing it and continue to doing the same thing.

That’s not smart when you have 6 months to live based on cash burn. And in order to be an industry leader, we need to consolidate. We need to put our egos aside and get together, either in a competition manner, combination of cooperation and competition, or through merger and consolidation, which is much more effective.

That’s what will create a situation where this industry will move forward, because without being profitable, having a $15 billion industry, and again, taking it down to the manufacturers and development of the technology, which is $2.5 billion to $3 billion, if it’s not profitable, it’s not going to hold for too long.

But because it’s such an enabling technology, it will hold because there’s no replacement for this technology or technologies, I should say. We just need the people to wake up in the morning and start to think about working together. Fifth question, I don’t remember, but I hope I answered through my long answer to the fourth – to the others..

Yes, you did. Again, thank you very much. And best wishes..

Thank you. Any more questions, please..

The next question comes from the line of Sol Zelman with Gericare. Please go ahead..

Good morning, Yoan. And thanks for the information shared on the call. Really great on the presentation. Great quarter results. I have two questions, one largely based on the press release shared this morning.

Based on the forward-looking strategy of going the M&A strategy, I see that strategy of waiting to see what will happen has paid off, especially based on the valuations of the peers that you mentioned going down daily.

The question is, based on that press release, and given those dynamics and even egos among those other 3D printing companies, would it be better placed to possibly wait and purchase them through bankruptcy proceedings, or is it a better idea to continue going through it? For example, I had seen that Stratasys deal was up in the air.

I did see in the presentation. I see them dropping daily. I even see, for example, another one, DM currently, based on their Q4 cash numbers, coupled with the stress in the bond market, DM currently is trading at $0.50 on the dollar. It looks like you won’t have long to wait.

Is the strategy to go for it now or, yes, to wait a little bit just to see if they go towards the bankruptcy proceedings, allowing that strategy to fully pay off?.

Okay, that’s an excellent question. And both companies that you have mentioned indeed are burning cash. Stratasys has burned about $160 million to $180 million during ‘23. They started the year with above $300 million. They have left with $160 million. And if they keep burning at the same rate, they will probably need to raise money or take debt.

I don’t think they’ll aim to go to Chapter 11. Stratasys is a serious company, and I think they have good prospects for the future if they do the right thing, which they’re not doing right now. But they are smart people, and we are the main shareholder of Stratasys, so I have a very serious interest. So these are not at the risk which you describe.

The others do. Sorry, the others are at the risk, exactly what you describe. If they continue to play the game on their own, it’s like soccer. Or you want to play soccer with 11 against 11? That’s great. You want to play soccer where you’re alone in the field and running with the ball? Good luck. Because that’s what we’ll end up.

You’ll end up with three or four players running on a soccer field with a ball each. And then what do you do? They do the Chapter 11 is not something I want to wait for. I’ve been myself a turnaround executive, and I’ve done Chapters 11 as a person who came from the outside to fix the situation. And I was successful in a couple of them.

But it’s a very difficult process. We are dealing with the industry that, with customers like NASA and SpaceX, and we specifically have a lot of defense customers, and the other competitors have defense customers. Those customers will have serious issues to continue and buy from a company that’s in Chapter 11.

Chapter 11 is a process that takes, at best, 6 months; at worst, more than a year. And I expect that in sensitive equipment like this and sensitive industries that we’re selling to, what you gain by maybe buying what’s left is lost by what’s left is far from what is before they go to Chapter 11.

One of a company in the industry called Fast Radius, went already to chapter 11, and it immediately turned into Chapter 7, which is liquidation. This company, we were the last one to do due diligence and to consider buying them.

We did a very serious due diligence, and it ended up that we said, there is nothing here that’s worthwhile paying what they wanted to. Again, ego issues. And the minute we said no, they went into Chapter 11. I was sorry for them.

But from Chapter 11, some company bought their assets, like the 20 or 30 machines that they had, and the company disappeared, and everything they had and technologies disappeared.

So, no, I don’t think waiting for Chapter 11, even if I have to pay 10% more, you will gain much more than having to deal with the breakage and loss of business that you will have to deal with after Chapter 11. The next question, please..

The next question comes from the line of Katherine Thompson with Edison. Please go ahead..

Hi there. I wanted to ask a question about your revenue growth in the year just gone and also the outlook for the coming year.

So just to get a sense of how much business did you get from repeat purchases from existing customers? How much was new customer wins? How much is system sales versus consumables? And really just to get a sense of how much more you think you can grow in 2024? And then just a second question on consolidation, clearly, you’ve got the bid in for Stratasys at the moment, and we’re still waiting for the outcome on their strategic review.

If that’s a no, what would your plans be?.

What was my – sorry, the last sentence, what will be my – our what…?.

What are your – what would your plan be if Stratasys says no, I am assuming you have got various other companies that you are considering for consolidation?.

Okay. Got it. Very good questions. Okay. First question. You asked 3 questions. So the revenue growth in 2023 was, to be fair to ourselves, we’re very proud of 29% organic growth. But our budget was $60 million.

We were 5% below our budget, which we debriefed, and we learned and studied, because as much as I am concerned, if we put a budget of $60 million and we reach $56.5 million or so, then obviously we’re 5% below budget. Yet, it was a great growth and fantastic year. But I would like to build an organization that stands by the budget.

That leads us to 2024 if we assume no acquisitions, because if you assume acquisitions, our growth will be stratospheric. Our growth will be in multiples, not in percentages. That’s based on the acquisitions I’m talking with now. But if we’re assuming with no acquisition, our growth, as we expect, will be lower than 29%, but higher than 15%.

And we are working that according to the budget today, our first quarter, which is usually the worst quarter of the year, first quarter this year is going to be not bad at all, because it’s growing. But you don’t know by the first quarter to say what will be in the end 3 quarters later. But we are starting the year on the right foot.

Next question was about systems, consumables, repeat sales, et cetera. Our consumables is about 10% of our revenue. Depends on which area. I’m speaking about 7% to 10% of the machines that we do sell consumables to.

There’s machines for additive electronics, for instance, that we don’t sell consumables because the consumables are components and semiconductors, and there we don’t sell the consumables. So there the consumables is zero. But in the areas that we do sell consumables, it is 5% to 10%.

And that number usually grows up and higher once our machines are going into production, rather than being in prototyping and early production testing. But for now, it’s about those percentages. As much as repeat sales, this year we had more repeat sales than we ever had in the history of the company.

I can’t tell you – I mentioned a few of the repeat sales during the presentation. I don’t remember without looking at it how many repeat sales. And it’s not the repeat sales, it’s additive sales because you don’t repeat the same sale.

Some companies we have, for instance, bought our additive manufacturing electronics and afterwards bought our additive electronics machine, so it’s repeat as much as the same customer, but it’s not necessarily a repeat of the same machine. Then other companies in defense that bought our DragonFly AME machine bought more dragonfly machines.

So that exists across the board. The last question you discussed the consolidation and you used Stratasys as an example. We are in discussion with Stratasys, friendly discussions. We plan and we hope to be able to come back to you, to the investors, to the market with some news about something that we would definitely plan to do. It’s a bit early.

The discussions are ongoing for the last 3 months and serious. But Stratasys have their alternatives and I have my alternatives.

And my alternatives, which was your last question, are very attractive comparing to Stratasys because those are companies that are more closer to the corner, call it this way, than Stratasys, with technologies that are more exciting than Stratasys to me, to us at least.

Yet I must admit with less go-to-market and distribution network the way Stratasys has, which is excellent, but with much more exciting technologies. Stratasys’ technologies are a little bit outdated to my taste. So we have alternatives, and we are pretty advanced in negotiations with alternatives. Thank you very much for your questions.

More questions, please..

Yes, our next question comes from the line of Ronni Rausch, Private Investor. Please go ahead..

Hi, can you hear me?.

Yes Ronni..

Hi. Thank you all for the presentation. I have two questions. The first one is regarding the revenue. I wanted to get your view on the current dynamics of the – in the 3D printing industry. Do you see the gross margin improving? The second question is obviously the revenue is no longer the catalyst anymore.

Sometimes it becomes a liability on low margin sales. Referring to the peers, in your opinion, did we hit the low-cycle by now? Thank you..

Okay. Let me start with the second question. This industry actually, again, let’s just say, business domain, call it, which is the group of companies that incorporate various technologies to print in three dimension products that are belong – that belong to many other industries.

So, this business domain has been in a kind of traumatic process for years now, at least for the last 10 years of pushing and fighting each other by reducing margins, in order to fight your competitor or in order to convince the market that this new technology is good for them.

That ends up with the company without naming names, for instance, that has been selling quite serious, serious, serious laser machines, laser 3D printing machines to very serious customers and industries and showing 6% gross margin. That means that every dollar they sell, they lose probably $0.30.

And maybe they are trying to compensate it with quantities, but that actually doesn’t work, as you know, because if you sell more of what you lose with, you just lose more. And this is an epitome in this industry.

Other companies don’t think that 6% is gross margins and exception, there is other companies, it is, the gross margins is between 15% and 25%, which is unacceptable. I am speaking about again, people who are on R&D, I am not talking about companies that manufacture using those machines to manufacture parts, that’s different.

You can live with 30% to 35% because you don’t do R&D. So, the revenue being liability, you are right, this industry is or this business domain has been in this mentality, I am not, we are not. And I think the whole business domain is starting to wake up to listen, to hear the music.

It’s a part of the maturity of the technology and the companies around us. And again, consolidation will help dramatically. That was your second question. Now, it goes back to your first question, which was the dynamics in this business domain in general and the gross margins, which is connected to the second question.

I don’t think the dynamics has already drove the numbers up the way they should, but they are in the right direction. If you look at certain companies in our industry, again, without naming names, there is one public company that have like us 47%, 46% gross margin.

Stratasys has 43%, 44% and it’s combined of mixture of products and materials when in certain areas they have much higher gross margin, which is good. Similar, maybe 3D, so some of the more senior executives, that are running companies in our industry are realizing what we are discussing here and I think they are going in the right direction.

I think without consolidation it’s not going to hold for too long, because they are still busy focusing on the top line instead of focusing on the bottom line, but it’s in the right direction. Next question please..

[Operator Instructions] The next question comes from the line of Rami Reddy with – Private Investor. Please go ahead..

Thank you for taking my question.

Are you expecting any analyst coverage in the near future?.

I want to expect, I expect to expect and I am very, very busy creating a situation where my expectations will be fulfilled. I am doing it in many ways. It’s important, it’s important in order to attract institutional investors.

It’s important even if all the analysts that I see in this industry, writing analyst reports with lacking real understanding of where the numbers are going and where the value of the shares are going and giving inflated expectations.

But still it’s even if it’s the case, it’s important that this analyst or that analyst or few analysts will write the report because the important part of the report is not necessarily the projection of the price of the share is the understanding that’s inside the report of the business of the company and the business dynamics of this domain.

And for that, analysts reports are extremely important to attract the right and the right investors and I am making an effort on a monthly basis to get them to write. And the problem is that usually an analyst start to write after their bank has been involved in the transaction of raising money.

And we do not expect or we didn’t raise money over the last 2 years, 3 years. We have enough money, but it’s coming, it’s coming, the fact that analysts are starting to see us as a consolidator, they will start to follow us..

Thank you..

Next question please.

Scott, any more questions?.

Next question comes from the line of Moss. Sorry, apologize, we do not have any more questions in the queue. At this time, I would like to turn the conference back over to the company for any closing remarks..

Okay. Thank you very much, Scott. Thank you very much everybody that was on the line. I hope that the fact that we take it as a methodology not to have this conference call and read to you the user list because that one you can read by yourself.

But rather run it as an open discussion when we speak to you about what we want to speak with you and we are mostly focused on talking to you about what you ask us. And I hope this format is good for you rather than just reading from a page, what is the user list.

Any questions, any requests you have for me, you know my e-mail, you know our phone numbers, of course Julien, Tomer, Moshe and we will be happy to talk to you offline. Thank you very much..

The conference has now concluded. Thank you for attending Nano Dimension’s quarterly earnings conference call. You may now disconnect..