Thank you, Jimmi Sue. Now let’s take a look at some notable happenings from the second quarter. So, as I mentioned earlier, we’re broadcasting from our CM&C facility in Nyborg, Denmark, as seen on Slide 19. And the reason we brought our Board to Nyborg was to show off the $27 million enhanced carbon products production facility that we completed late last year. This is the unit of operation that upgrades distillate that would otherwise go into the carbon black feedstock market and instead turns it into a high quality anode or impregnation pitch for which we’re able to sell at higher prices than the alternative product I mentioned earlier, carbon black feedstock. This is also the facility that can produce a high quality coating for the lithium ion battery market, which we remain cautiously optimistic about and could hold the key to reducing the volatility we see in this segment from time to time. Now, we also built a lab for our European performance chemicals business here at Nyborg and are looking for other ways to take advantage of the synergy of having a concentration of very talented people here at this site on a day to day basis. Speaking of day to day, our base business at Nyborg is distilling coal tar into critical products that serve many important product and geographic markets, where we utilize the competitive advantage of our strategically situated harbor to move products to our customer base. Slide 20 features our recently issued corporate sustainability report for 2023, which outlines our achievements as they relate to our values of people, planet and performance. Highlights from the 2023 CSR include achieving our goal of a 50% reduction in Scope 1 and Scope 2 emissions against our 2007 baseline seven years ahead of schedule, improved safety performance by achieving total recordable injury rate of 2.73, which is our lowest rate since 2018. We introduced a new patented wood treatment product, MicroPro XPS, representing a breakthrough application for this key market. Newsweek named Koppers to its listing of America’s Most Responsible Companies for the four straight year and USA Today named Koppers to its listing of America’s Climate Leaders for the second straight year. As always, my deepest gratitude goes to our team members across the globe for their commitment to operating sustainably, and this dedication will help us to continually improve our overall performance going forward. Slide 21 shows our team members volunteering in support of Koppers preserving the Earth campaign. From Earth Day on April 22 through World Environment Day on June 5, employees from our locations across the world pursued activities supporting the environment in ways that demonstrate protecting the planet, which is one of our core values. Our appreciation goes out to all of our eco ambassadors for keeping our world beautiful today and for future generations. So now on to a review of each of the businesses, and I’ll start with performance chemicals on Page 23. The second quarter played out almost as the first, as volumes finished flat compared to Q2 2023 while a focus on costs carried the day. After years of steady growth, repair and remodeling expenditures have seen their unsustainable pace slow over the past couple of years. Repair and remodeling expenditures moved into negative territory in Q1 of this year, and while that trend is expected to continue for the next several quarters, it appears that the year-over-year decline will hit a trough by the end of this year before beginning to improve in 2025. Now, despite that, and with existing home sales remaining in a slump, our residential chemical volumes continue to hang in at levels similar to prior year, and we don’t see that subsiding in the back half of this year. On top of that, we should get a little boost from some friendly treater consolidation that will add some incremental volumes, while industrial volumes also are expected to contribute slightly. The new grinding capacity that came online in Q2 is already contributing to cost savings through faster cycle times, and we’ve pulled back on spending and all but the most necessary areas in order to help pick up the slack for our struggling CM&C segment. As a result, we’re upping our estimate of full year EBITDA improvement for our PC segment to a range of $12 million to $16 million. Moving on to our utility and industrial products business shown on Page 24. We closed on the Brown acquisition in April and are well into the integration process. Operationally, things are going good and we’re already beginning to realize some of our identified synergies. Sales are starting to build some momentum after working through some early transition challenges, and we’re happy to have the additional capacity and operational flexibility that the Brown acquisition brings. As for our Texas market entry, just six months in, we’re already tracking towards 40% achievement of our long-term market penetration goal, so we are making good progress on that front. As projected on our Q1 call, our legacy business experienced a little pullback from last year’s Q2, as certain of our customers work through destocking and project delays or deferrals. But outside of a handful of customers, the rest of the market remains solid and growing. During the quarter, we also gained a little bit of price while also improving our cost profile by bringing more drying capacity online and pulling back on operating costs to align with lower Q2 volumes. On another bright note, our Australian pull business had its most profitable quarter since 2014 as that business continues to perform well and we remain extremely pleased with our growing footprint in the UIP space and believe the future continues to look very bright. Our railroad products and services business is summarized on Page 25. While we still haven’t resolved all of our issues on the customer front, as mentioned on our May call, we have taken various steps to change our approach, which is already paying some dividends. Through June, we’ve increased price by $17 million, which has helped to offset some but not all cost increases. Sales volumes for the quarter were up ever so slightly at 1% and now we expect to finish the year flat from a volume standpoint, as we did have a customer pullback after some initial projections earlier this year had us in an overall 5% growth rate. Our commercial business remains a bright spot as the backlog and profitability remain very strong. One positive on the sales front is that we’ve had a few customers indicate that in Q4 of this year they will discontinue purchases of dull treated creosote borate crossties and revert back to a higher retention creosote product. While our rail business is agnostic to the change, this is a positive for our CMC business as we will treat with more creosote for the railroads making that switch. On the cost side of the ledger, we reduced our boltonizing in Q2 to the lowest level since Q1 of 2022, which increases our asset efficiency. And we also began implementing $4 million to $7 million of cost reductions to address the fact that we were continuing to incur millions of dollars of cost to serve certain customers in ways that they wanted but were reluctant to pay for. Now some of those savings began being realized during Q2, with the lion’s share expected to occur over the back half of the year. Looking at our entire RUPS segment. We’ve trimmed the top end of our EBITDA guidance slightly and are now expecting $10 million to $15 million of improvement for the year. Finally, onto the CMC business, which is summarized on Page 26. While second quarter results for CMC were much improved over the first quarter, we still saw significantly lower pitch pricing and volumes compared to Q2 of 2023. Q3 of last year is when this business took its first step down, so our comps improved in the back half of this year, which will help as we’re still unable to see an improvement in the pitch markets through the balance of this year. Phthalic anhydride business had a second consecutive strong quarter as we continued to catch a windfall from other production struggles in the industry. While we originally thought we could see that benefit subside by the end of Q2, it looks like we might be able to enjoy it for at least another quarter. Our Stickney plant operating performance was better in Q2 when we began realizing some of our raw material cost reductions, which has also helped. And like the other businesses, we’re taking a hard line on costs to help cover for the gaps brought on by some turbulent market conditions in the near term. Somewhat specific to CMC, we’ve also cut back planned capital expenditures for this year by $10 million as we evaluate our long-term operating strategy to see what we can do to not only boost profitability, but get back to a positive free cash flow position for this business. With all the noise that remains in this business, we’re reducing our guidance for this segment to a year-over-year decline of $7 million to $13 million. Now, bringing it all together with the usual puts and takes, I feel confident in reaffirming our full year guidance now that the first half of the year is in the books. Although 2024 has been challenging from a market perspective across most of our businesses, our global team has done a great job of managing the controllables and we’ve been able to deliver favorable results despite some tough near-term dynamics. The fact that we’re performing at the level we are in the current environment gives me confidence that as markets turn in our favor, which they will, the upside for us is significant. On Slide 28, we’re adjusting consolidated sales growth to now be flat year-over-year. RUPS sales overall are now projected to see $60 million in top-line increase. PC sales are forecasted to be flat year-over-year and CM&C sales are estimated to decrease by $60 million due primarily to price and volume decline in carbon pitch, much of which we’ve already experienced, partially offset by volume increases in phthalic anhydride. And overall, our sales forecast for 2024 is approximately $2.15 billion, which would be similar to 2023. On Slide 29, we’re maintaining our forecast for adjusted EBITDA, which is expected to still be in a range of $265 million to $280 million, with some modest shifts in how we see the magnitude of change year-over-year. On Slide 30, you see our adjusted earnings per share bridge, where we continue to expect a strong contribution from operations offset somewhat by depreciation and amortization and interest expense. For 2024, we’re maintaining our previously communicated guidance of $4.10 to $4.60 with the upper end representing a new high for Koppers. On Slide 31, we’re further tightening our capital spending estimate to a range of $80 million to $85 million in 2024, compared with $116 million in 2023 on a net basis. Spending on maintenance and