Greetings and welcome to the Varex Imaging Second Quarter Full Year 2024 Earnings Call. [Operator Instructions] As a reminder, this conference is being recorded. It is now my pleasure to introduce your host, Chris Belfiore, Director of Investor Relations. Thank you, sir. You may begin. .

Good afternoon, and welcome to Varex Imaging Corporation's earnings conference call for the second quarter of fiscal year 2024. With me today are Sunny Sanyal, our President and CEO; and Sam Maheshwari, our CFO.

Please note that the live webcast of this conference call includes a supplemental slide presentation that can be accessed at Varex's website at vareximaging.com. The webcast and supplemental slide presentation will be archived on Varex's website.

To simplify our discussion, unless otherwise stated, all references to the quarter are for the second quarter of fiscal year 2024. In addition, unless otherwise stated, quarterly comparisons are made year over year from the second quarter of fiscal year 2024 to the second quarter of fiscal year 2023.

Finally, all references to the year are to the fiscal year and not the calendar year, unless otherwise stated. Please be advised that during this call, we will be making forward-looking statements, which are predictions or projections about future events.

These statements are based on current expectations and assumptions that are subject to risks and uncertainties that could cause actual results to differ materially from those anticipated. Risks relating to our business are described in our quarterly earnings release and our filings with the SEC.

Additional information concerning the factors that could cause actual results to materially differ from those anticipated is contained in our SEC filings, including Item 1A, Risk Factors of our quarterly reports on Form 10-Q and our Annual Report on Form 10-K.

The information in this discussion speaks as of today's date, and we assume no obligation to update or revise the forward-looking statements in this discussion. On today's call, we will be discussing certain non-GAAP financial measures.

These non-GAAP measures are not presented in accordance with, nor are they a substitute for, GAAP financial measures. We will provide a reconciliation of each non-GAAP financial measure to the most directly comparable GAAP financial measure in our earnings press release, which is posted on our website. I will now turn the call over to Sunny. .

Thank you, Chris. Good afternoon, everyone, and thank you for joining us for our second quarter earnings call. Sales in the second quarter was in line with our expectations, resulting in revenue of $206 million. Non-GAAP gross margin of 33% was within the guided range, and non-GAAP earnings per share was $0.16 in the quarter.

Revenue in the second quarter was down 10% year over year. Revenue in the Medical segment decreased 15% year over year, while the Industrial segment revenue increased 6%. Non-GAAP gross margin in the second quarter was 33%, which was flat compared to the same quarter last year, and non-GAAP EPS was $0.16 compared to $0.26 last year.

We ended the second quarter with $190 million worth of cash, cash equivalents, and marketable securities on the balance sheet, up $68 million compared to the second quarter of fiscal 2023.

Now let me give you some insights into the sales detail by modality in the quarter compared to a 5-quarter average, which we will refer to as the sales trend, sales in our Medical segment was down in the quarter due to cautious purchasing behavior by our customers in addition to the continued softness in China.

Global sales of CT tubes improved in the quarter and is now in line with the sales trend. Fluoroscopy and mammography were both in line with their respective sales trends. Oncology, radiographic, and dental modalities were all below their respective sales trends.

Global sales of our industrial products were solid in the quarter and in line with our sales trend. Our cargo inspection products and industrial tubes continued to see strong sales while we experienced some softness in other industrial end markets, primarily in semiconductor, electronics, and battery inspection.

Now I'd like to take a moment to give you an update on our photon-counting technology. As we highlighted in the past quarters, photon-counting detector technologies are a significant focus across the entire imaging industry.

Both medical and industrial OEMs continue to explore the use of photon-counting in imaging applications across various modalities, from food inspection to full body medical CT.

Engagement with our OEM customers has accelerated over the past year, and we believe Varex continues to be well positioned to benefit from these trends given our innovative technology and breadth of our product portfolio.

Our Industrial segment, where technology adoption tends to be faster, continues to be the main driver of our photon-counting detector sales. The technology is being adopted in high growth niche verticals where there's a need for high speed and high sensitivity imaging.

Our photon-counting detectors continue to be integrated into new customer systems, and we expect industrial applications to remain solid source of sales of Varex's photon-counting products in the future. In addition, last year we provided an overview of 2 collaborative photon-counting projects in our industrial business, PARSEC and GRINNER.

These projects are sponsored under the Horizon Europe program, the European Union's key funding program for research and innovation. Both projects are focused on the speed of imaging and material discrimination, which are distinctive strengths of photon-counting.

The PARSEC project, aimed at addressing the potential abuse of postal and express courier services by criminals and terrorists, is making solid progress. The material discrimination capability of our photon-counting technology, coupled with AI software, is being used to test the detection of illicit substances within clusters of parcels.

The GRINNER project, which is aimed at preventing battery-caused fires in the electronics waste management chain, is also progressing well. A prototype incorporating our photon-counting technology is expected to be deployed to an end user facility in Europe for gathering data and field-testing.

Once testing at the recycling facility is complete in late fiscal 2024. We expect to work with our customer on commercialization of the final system. In our Medical segment, our photon-counting technology is being used in full body scans and panoramic dental imaging.

As we noted on our first quarter earnings call, we're working with a major OEM to integrate our photon-counting technology in their next generation of CT scanners. This process is moving along as planned. We also now have other prospects in the pipeline who are in various stages in assessing our technology for CT applications.

We expect new and existing applications of our photon-counting technology to contribute strong sales growth over the next 5 years. Specifically, we expect additional applications in medical, including CT, to add over $100 million of revenue over this timeframe.

Coupled with traction in our industrial markets, we expect our photon-counting portfolio to contribute more than $150 million of revenue annually by fiscal 2029. We continue to be encouraged by the acceptance of photon-counting technologies for medical and industrial applications. With that, let me hand over the call to Sam. .

revenues are expected between $200 million and $220 million and non-GAAP earnings per diluted share are expected between $0.05 and $0.25.

Our expectations are based on non-GAAP gross margin in a range of 33% to 34%, non-GAAP operating expenses in a range of $52 million to $53 million, tax rate of about 22% for the third quarter, and non-GAAP diluted share count of about $41 million shares. And with that, we'll now open the call for your questions. .

[Operator Instructions] Our first question comes from Suraj Kalia with Oppenheimer. .

This is Shaymus on for Suraj. Just to get started, China, any more color you can give there, what are you seeing on the ground? Obviously, it's pushed out from your initial expectations of second half of the calendar year getting started.

Can you talk a little bit more about the delay pushing out through the remainder of your fiscal year and when we may start seeing some pickup?.

Yes. So, as you might recall, a couple of quarters ago, we started talking about softness in China based on early signals that we were getting from our customers. And this was driven by the audit process that the Chinese government had launched on the hospitals there. And it was anticipated that it would take about 12 months to complete that process.

So, the signals that we were getting from our customers broadly on the ground was that by late spring, early summer, this thing should start to free up and buying would begin again. And so, that's what led us to give you the indications that we would expect to start to see recovery in the second half of the year.

And I think that was somewhat consistent with what others were seeing as well. We are not seeing the early indicators at this time that would lead us to believe that the recovery will happen with any significant volume in our second half. As you know, we're 90 to 120 days ahead in the value chain of our customers.

And so, with that in mind, we are giving a cautious view of the second half and as far as China is concerned. Now, that said, as we continue to keep our ears to the ground there and work with our customers, what we expect is likely to happen is there are multiple factors playing at play here.

One was the audit, but secondly, there may be some impact of the stimulus package that's in the wings. It's not clear what that is, and it's not clear what the impact is, but there's some general confusion.

All of this leads us to believe that the recovery in China will be more of a gradual, steady recovery as opposed to any significant burst of pent-up recovery. We're not anticipating that, but again, it's very fluid there, and we're staying close to it. .

Got it. Appreciate that. And then, can you describe the environment you're seeing outside of China? I think Americas growth was, I think, 1%; EMEA was 2% or 3% somewhere there. What kind of environment are you seeing outside there? Does it... .

Let me add one more point regarding China. We have seen no shift or no change in the Chinese government's intent or their policy or their intentions to expand healthcare delivery services throughout China. And to the contrary, it seems like the intention of the stimulus is also to continue to support that.

Now, what we're seeing outside of China, ex China, is that there continues to be a general softness in demand. And this is what we characterized as some cautious buying behavior by our customers. Our customers, they predict, they forecast their needs, and then they place orders with us within our prescribed lead times.

And then as they get closer to when they need the product, that's when they give us delivery dates. And what we've seen is general cautiousness around volumes of shipments that they would like from us.

So, they're asking us across the board, many customers have asked us to defer, delay, slow down shipments as they adjust their stocking levels and inventory levels to match their more recent forecasts of when they expect to deploy these products into new systems for shipment.

So, that's a broad based view that we're getting of the overall Medical segment. It's hard for us to tease apart where some of that softness is coming from because, as you know, our customers are global customers. We ship products to them, and then they send those products all over the world. So, it's hard to pinpoint any specific sources of softness. .

And just one last one from our side and photon-counting, we appreciate the color and quantification. I think you noted somewhere in that slide deck it's about $150 million in revenues by about 2029.

So, I guess, can you describe how you're expecting the growth? Is this going to be a slow burn? Is there going to be some inflection point where in a year everything's going to start to accelerate? Any color there. Thank you. .

Yes. Our photon-counting detectors, first of all, it's a new platform. And anytime a new technology is introduced in the healthcare environment, the time to adoption is fairly long. So, that's why our R&D cycles are long and our customers' R&D cycles are long, and then their regulatory cycles. So, that said, that's the backdrop on the Medical side.

Our photon-counting sales are coming from Industrial and Medical, both. On the Industrial side, which is currently our largest chunk of photon-counting sales, the uptake there is steady, and it's growing, and it's accelerating.

So, in this trajectory from where we are today, in $20-ish million of sales going up to the $150 million-ish that we talked about in the slides, we expect to see steady, accelerating uptake on the industrial side driven by new applications that are coming out.

And adoption in Industrial tends to be much faster than Medical because they have a product, they just put it out there, and they try it out. On the Medical side, we have customers currently that have designed our photon-counting detectors in certain applications.

And there are a variety of applications that this technology, these detectors are going into. A few of them are out, and we mentioned that during the earnings call, and then there are more that are in the pipeline.

In the early stages of these applications, design-in process, we see low volumes, largely prototypes that we ship, then there's customers take a couple of years to bring the product to market, and then we see initial pilots, and then a year after that, we see run rate, higher volumes.

So, that's, I'd say, the general modality -- most of the modalities behave that way. Now, CT detectors, we expect, will have a different trajectory, and that's because they are much larger, higher priced, bigger detectors.

So, there it'll be, we will be in design phase and implementation phase for at least 2 to 3 years, after which we expect the acceleration to be fairly rapid as our customers take their new CT systems to market.

And it'll be driven by the pace of adoption, really, of CT systems more so than the new CT system that our customers bring to market versus just photon-counting technology at that point. Our photon-counting technologies are being driven towards mainstream markets.

So, we're confident that once our customers bring these products to market, it won't be a very narrow niche application. We are targeting at the mainstream CT market. So, towards that outer end of our trajectory that we showed you in the walk, it's going to be driven by CT.

Between now and 2028, it's going to be 2026, '27, '28, it's going to be driven by Industrial and a few other Medical modalities. I hope that gives you the color you are looking for. It's hard for us to go get more specific because there's challenges in predicting that far out on products that are in design phase with the customers. .

The next question comes from Young Li with Jefferies. .

I guess to start, maybe to follow up on China a little bit. It sounds like most, if not all, the impact is due to the anticorruption campaign. Wondering if there's any local competitive dynamics that's at play there as well. .

No, we don't see that as the reason for any of this slowdown. The slowdown is substantial slowdown, and as you know, most of our business in China is driven by x-ray tubes. And within x-ray tubes, the majority of our volume comes from the CT systems where we are -- it's a highly engineered product that's designed in.

So, what we are experiencing is a result of our customers not needing the products because their sales have dropped pretty significantly. .

Okay, great. Very helpful. I guess just a separate question, just related to photon-counting. That generates a lot more images and data.

I'm curious, is there a software play or AI play for Varex? And how's your software business doing recently?.

Yes, absolutely. So, photon-counting, depending on the application, what you just described, would be certainly true for CT. For CT, first of all, high-resolution detectors and imaging at high frame rates produces a lot of data. Yes, there is.

So, the good news is in there that with the high-resolution images, the amount of information that's now available in these images opens up a lot of opportunities for AI plays and for material discrimination and more precise pinpointing of artifacts and reasons, and to be able to distinguish between one type of artifact versus another.

Our software group is very capable with CT reconstruction and applying image processing and techniques to look into and extract more and more information out of the data that's received. So, we certainly expect that our software group will continue to benefit from photon-counting.

We have quite a bit of technology that we offer currently with our detectors for image processing, and those are actually a key part of our photon-counting detector offerings. And as we take our products to market for CT, they are certainly playing a role in the image processing and image construction.

[Operator Instructions] Our next question comes from James Sidoti with Sidoti & Company. .

On the situation in China, do you think there'll be some pent-up demand because of the slowdown in buying now, or the procedures are still getting done, tubes are still wearing out.

So, when these restrictions get lifted, do you think there'll be an increase in demand?.

Yes. So, Jim, procedure volumes are continuing. People need care, they go get care. So, what we are seeing is sales of replacement tubes. And for us, that's a recurring revenue stream. The pent-up demand is results when we get increased procedure volumes. So, that is, I don't know whether we can predict that at this point.

However, what we believe will drive the return to growth is the continued push to expand healthcare services in China. They have not come off of that. Everything that we hear from our customers is that the Chinese government is continuing to press forward.

What is unclear at this stage is what effect the stimulus package that is in the sidelines will have on how that pent-up demand will play out. We're not getting much transparency around what hospitals will have to do in order to be able to take advantage of the stimulus program that's being rolled out.

Once there's more clarity on that, we'll be able to assess the trajectory of the demand. But the thing that we have noticed over time is when there's any a slowdown or stoppage for economic reasons or other reasons, when the demand comes back, the pent-up demand doesn't go away. It comes back.

And the question is whether it'll be a gradual ramp up, which we think it's more likely, versus is there going to be a sharp inflow of orders? We don't know that yet, honestly. So, that's what, in the next 90 days or so, we expect to get more clarity on that, and we will continue to share that with you. .

And then can you talk about your options regarding the refinancing the convert? Are you looking at another convert for that, or possibly going with straight debt? When do you need to do it? And how are rates comparing now to the existing loan?.

Yes, sure. So, Jim, we just recently closed about $175 million of new financing, one is a revolver, $155 million and another $20 million of delayed draw term loan. So, from our position, we feel we are in a very strong position from the liquidity perspective to address the refinancing.

So, at this time, the existing convertibles are maturing next June, so June 2025. So, we are going to monitor the situation and make the right decision for us. And we'll share with you as the Board makes that decision. There are a lot of factors that go into it, including interest rates, stock price, and various other things.

So, that's the way we are thinking about. And then, in terms of interest rates, our current loan is at 4%. The current convertible bonds are at 4%. Based on what we have seen from the convertible market, it's around there. It's probably a little bit less than that if there were to be a new convertible loan.

But as convertible loans can be structured with various dimensions and various outcomes. So, the interest rates can vary depending upon how it is structured. But at the same time, we feel we have good cash on the balance sheet.

We are in an excess cash position, and with this extra liquidity that we now have raised, I think there is also the possibility that we can pay it down partially or completely. So, we'll share with you as and when we make the decision. .

All right. And that was going to be my next question.

How much cash do you need on the balance sheet to comfortably run the business?.

Yes, if you go back 4 or 5 years ago, we were running the business with about $50 million, $60 million. Since COVID, we've decided to have $100 million or thereabouts, in terms of the cash, that we would like to carry on the balance sheet. So, with $190 million, we have about $90 million of excess cash compared to that threshold. .

Okay. So, theoretically, you could pay down almost 25% of the outstanding debt. .

Outstanding debt, meaning... .

The convert. .

No, we could theoretically pay down 50% of the convert, because the convert is about $200 million. And between now and June, we are targeting to generate cash, so we might be able to pay down 50% from balance sheet. .

Right. Which should theoretically lead to lower interest rates in 2025 and beyond. It does make sense. .

The next question comes from Larry Solow with CJS. .

I guess, the first question, in terms of the guidance or the lower outlook, is it principally -- it sounds like it's China, but it's also U.S. or ex China, because China is only 10% of your overall revenue, right? So are there other drivers? I guess the U.S. or ex China is also weaker in Medical.

And how about Industrial? Has that changed at all? Just trying to piecemeal the reduction. And I think when you started the year you had said, you thought took medical, I think, was going to be flattish overall sales, if I remember correctly.

Is there a revised number to that? I know you only guide to the quarter, but it sounds like as a whole, your whole year is clearly coming down. But any more pieces to that puzzle would be great. .

Yes, Larry. So, yes, China is soft, but on top of that we did say that the broader market in Medical is also soft, particularly driven by what we said, cautious customer behavior. And that phenomenon is not just China. So, yes, there is the effect of China as well as ex China there is also softness in Medical.

So, Medical, we expect it to be down this year, year-over-year. So, that's what we are currently seeing in Medical. In terms of overall revenue, what we are saying, we have provided the guidance for Q3, and at this time we are seeing Q4 to be flattish to Q3. So, that gives you almost the entire year.

We are expecting Industrial business to be a slight growth, flattish to slight up year over year. It's a pretty strong comp for the last year for what Industrial did. At this time, the cargo business in Industrial is doing very well, and we expect it to continue to do well. But there is softness in Industrial outside of cargo.

So, with all of those puts and takes combined, we expect Industrial to be a growth area for us, but very slightly for full year '24 compared to fiscal '23. And we expect Medical to be down. .

And the caution from, I guess, is your OEM customers, right, that you're referring to?.

That is true, yes. .

And I guess you're down the chain line, but does that start from the hospital? Because my understanding is, hospitals are actually doing okay. They're doing pretty fine. Their volumes have been good post COVID.

And I think concerns about hospitals' finances are probably overblown, even though I know interest rates are a lot higher and that doesn't help them. But as far as I understand, capital spending in hospitals has been doing okay.

So, are your customers cautious because there's too much inventory still? Is there any common theme that's driving this caution?.

Larry, it's all of the above and the conversation starts with, hey, we have what we need, and we just need to adjust our stocks and stocking levels.

Can we slow this down? Can you push out? And then if you dig into, well, why do you have so much inventory? Well, we had expected a different trajectory of orders and then the COVID buying behavior post COVID, where people were worried about their factories were clogged and supply chain issues.

So, it's a myriad of things that have come together, causing some amount of destocking and inventory adjustments. And clearly what they had in mind when they bought the components didn't match up all the way with their current quarter production needs. So, it's several of those. It's hard to reconcile. See, most of our customers ship from backlog.

So the hospital's health, that's a good thing. We're glad that procedure volumes are there and growing because that's going to drive in replacement of these modalities in our tubes.

That doesn't correlate directly with hospitals accepting shipments of large systems which require then other work on the side of the hospital, civil works, construction and things like that. So, variety of reasons why their shipments have slowed for certain customers. .

All right, I guess that's fair. .

Thank you. At this time, I would like to turn the call back over to Chris Belfiore for closing comments. .

Thank you for your questions today and for your continued support of Varex. The webcast and supplemental slide presentation will be archived on our website. A replay of this quarterly conference call will be available through May 16 and can be accessed at vareximaging.com/investorrelations. Thank you and have a great night. .

Thank you. This does conclude today's teleconference. You may disconnect your lines at this time. Thank you for your participation and have a great day..