image
Technology - Software - Application - NASDAQ - US
$ 299.15
-2.45 %
$ 64.3 B
Market Cap
62.58
P/E
EARNINGS CALL TRANSCRIPT
EARNINGS CALL TRANSCRIPT 2024 - Q1
image
Operator

Thank you for standing by, and welcome to Autodesk First Quarter Fiscal 2024 Earnings Conference Call. At this time, all participants are in a listen-only mode. After the speaker presentation, there will be a question-and-answer session. [Operator Instructions] I would now like to hand the call over to Simon Mays-Smith, VP, Investor Relations.

Please go ahead..

Simon Mays-Smith

Thanks, operator, and good afternoon. Thank you for joining our conference call to discuss the first quarter results of Autodesk's fiscal '24. On the line with me are Andrew Anagnost, our CEO; and Debbie Clifford, our CFO. Today's conference call is being broadcast live via webcast.

In addition, a replay of the call will be available at autodesk.com/investor. You can find the earnings press release, slide presentation and transcript of today's opening commentary on our Investor Relations website following this call.

During this call, we may make forward-looking statements about our outlook, future results and related assumptions, acquisitions, products and product capabilities and strategies. These statements reflect our best judgment based on currently known factors. Actual events or results could differ materially.

Please refer to our SEC filings, including our most recent Form 10-K and the Form 8-K filed with today's press release, for important risks and other factors that may cause our actual results to differ from those in our forward-looking statements. Forward-looking statements made during the call are being made as of today.

If this call is replayed or reviewed after today, the information presented during the call may not contain current or accurate information. Autodesk disclaims any obligation to update or revise any forward-looking statements. During the call, we will quote several numeric or growth changes as we discuss our financial performance.

Unless otherwise noted, each such reference represents a year-on-year comparison. All non-GAAP numbers referenced in today's call are reconciled in our press release or Excel financials and other supplemental materials available on our investor relations website. And now, I will turn the call over to Andrew..

Andrew Anagnost

resilience, discipline, and opportunity. In a more challenging macroeconomic, policy and geopolitical environment, our resilient business model, and geographic, product and customer diversification, enabled us to deliver 12% revenue growth in constant currency, healthy margins, and record first quarter free cash flow.

Leading indicators remained consistent with last quarter with product usage growing modestly, bid activity on BuildingConnected again at record levels, and continued cautious optimism from channel partners. Consistent with year-over-year economic momentum, we saw new subscription growth decelerate in North America and accelerate in EMEA.

But our customers remain committed to transformation and to Autodesk, leveraging automation more as they see headwinds from the economy and supply chains.

That commitment is reflected in larger, broader and more strategic partnerships, improving renewal rates, consistent net revenue retention, and growing adoption and usage of our products within EBAs; all of which helped drive 12% growth in current RPO and 15% growth in total RPO.

While macroeconomics are unpredictable in the short-term, we are executing our strategy through the economic cycle with disciplined and focused capital deployment, underpinned by one of the best growth, margin, and balance sheet profiles in the industry.

This enables Autodesk to remain well invested to realize the significant benefits of its strategy, while mitigating the risk of having to make expensive catch-up investments later. Discipline and focus also mean making sure we are investing in the right places.

This is a constant process of optimization and improvement with increased vigilance during periods of macroeconomic uncertainty to prioritize investment and recruitment.

As you heard at our recent Investor Day, we are deploying next-generation technology and services and end-to-end digital transformation within and between the industries we serve and, in so doing, shifting Autodesk from products to capabilities. Our AEC industry cloud, Forma, launched on May 8, is a great example of our vision.

During pre-release trials, customers like CUBE 3 clearly saw how Autodesk Forma's intuitive user interface enabled rapid adoption by existing and new users; how bi-directional data flows enhanced the value of other Autodesk products like Revit; and how a single, integrated environment in the cloud, enhanced by AI, accelerated modeling and response times while significantly enhancing the value delivered to its customers.

While using Forma during its trial, CUBE 3 delivered more creative and valuable designs to its customers while reducing the concept design phase by 50% or more.

At Investor Day, I also talked about leveraging our key growth enablers, including business model evolution, customer experience evolution, and convergence between industries, to provide more and better choices for our customers. Our Flex consumption model is a good example of this.

Flex's consumption pricing means existing and new customers can try new products with less friction, and also enables Autodesk to better serve infrequent users. Not surprisingly, the lion's share of the business has come from new customers or existing customers expanding their relationship with Autodesk.

As Steve said at our Investor Day, we've also introduced a new transaction model for Flex, which will give Autodesk a more direct relationship with our customers and more closely integrate with our channel partners over time. During the quarter, Flex moved up into the top 10 products on our e-store, and we signed our first million-dollar Flex deal.

Autodesk remains relentlessly curious with a propensity and desire to evolve and innovate.

Our transformation from products to capabilities will enable us to forge broader, trusted and more durable partnerships with more customers; gives Autodesk a longer runway of growth and free cash flow generation; and enables a better world designed and built for all.

I will now turn the call over to Debbie to take you through the details of our quarterly financial performance and guidance for the year. I'll then come back to update you on our strategic growth initiatives..

Debbie Clifford

the expectations embedded in our guidance range for the full year remain consistent with the underlying momentum in the business; and, we expect a tailwind in the second half of the year from a strong cohort of Enterprise Business Agreements.

These EBAs last renewed three years ago at the start of the pandemic, and subsequent adoption and usage has been strong. Let me summarize some key factors we highlighted last quarter. First, foreign exchange movements will be a headwind to revenue growth and margins in fiscal '24. Revenue headwinds from Russia and FX peak in the first half of the year.

Margin headwinds from FX will persist throughout the year. Second, switching from up-front to annual billings for most multi-year customers creates a significant headwind for free cash flow in fiscal '24 and a smaller headwind in fiscal '25. Given this transition started on March 28, this will become more apparent from the second quarter onward.

Our expectations for the billings transition are unchanged. And third, it's possible that during the transition to multi-year contracts billed annually, some customers may choose annual contracts instead.

We haven't seen much evidence of this in the limited time since the annual billings program started on March 28, but it's early days and we'll keep you updated as the year progresses.

All else equal, if this were to occur, it would proportionately reduce the unbilled portion of our total remaining performance obligations and would negatively impact total RPO growth rates. Deferred revenue, billings, current remaining performance obligations, revenue, margins, and free cash flow would remain broadly unchanged in this scenario.

Annual renewals create more opportunities for us to drive adoption and upsell, but are without the price lock embedded in multi-year contracts. We still expect our cash tax rate will return to a more normalized level of approximately 31% of GAAP profit before tax in fiscal '24, up from 25% in fiscal '23 for the reasons we outlined last quarter.

As I mentioned earlier, a federal tax payment extension after the winter storms in California means cash tax payments will shift from the first half of the year to the third quarter, reducing third quarter free cash flow. The tax payment extension will change the first half/second half free cash flow linearity a little bit.

But we still think we'll generate roughly half of our free cash flow in the second half of the year, with second half free cash flow generation significantly weighted to the fourth quarter. We still anticipate fiscal '24 to be the free cash flow trough during our transition from up-front to annual billings for multi-year contracts.

Putting that all together, we still expect fiscal '24 revenue to be between $5.36 billion and $5.46 billion, up about 8% at the mid-point, or about 13% at constant exchange rates and excluding the impact from Russia.

Normal seasonality, peak second quarter currency and Russia headwinds and, as I mentioned earlier, a strong second half pipeline of enterprise agreements last renewed three years ago in the immediate aftermath of the onset of the pandemic, mean we expect reported revenue growth to accelerate in the second half of the year.

We expect non-GAAP operating margins to be similar to fiscal '23 levels with constant currency margin improvement offset by FX headwinds. As I said earlier, in a more challenging macroeconomic environment, we are being vigilant and proactive to sustain our margins. We expect free cash flow to be between $1.15 billion and $1.25 billion.

The mid-point of that range, $1.2 billion, implies a 41% reduction in free cash flow compared to fiscal '23, primarily due to the shift to annual billings, a smaller multi-year cohort, FX, and our cash tax rate. The slide deck on our website has more details on modeling assumptions for Q2 and full year fiscal '24.

We continue to manage our business using a rule-of-40 framework with a goal of reaching 45% or more over time. We think this balance between compounding growth and strong free cash flow margins, captured in the rule-of-40 framework, is the hallmark of the most valuable companies in the world. And we intend to remain one of them.

As we said last quarter, the rate of improvement will obviously be somewhat determined by the macroeconomic backdrop. But, let me be clear, we're managing the business to this metric and feel it strikes the right balance between driving top-line growth and delivering on disciplined profit and cash flow growth.

We intend to make meaningful steps over time toward achieving our 45% or more goal, regardless of the macroeconomic backdrop. Andrew, back to you..

Andrew Anagnost

further hardening our systems by significantly tightening concurrent usage of named user subscriptions, and significantly expanding the precision and reach of our in-project -- product messaging. We expect both initiatives to drive further conversion and growth in the second half of the year and beyond. Let me finish where I started.

Autodesk remains relentlessly curious with a propensity and desire to evolve and innovate.

With our AI infused industry clouds, Fusion, Forma, and Flow, scaled on Autodesk Platform Services, our customers will be able to leverage their large, domain specific, inter- and intra-industry data sets to deliver further breakthrough productivity, operations, and sustainability gains.

And with intuitive UIs and the application of multi-modal AI models that move beyond language models to capture sketches and reality directly into accurate 3D models, we will be able to accelerate the transition from products to capabilities that I talked about at our recent Investor Day.

Our transformation from products to capabilities will enable us to forge broader, trusted and more durable partnerships with more customers; give Autodesk a longer runway of growth and free cash flow generation; and enable a better world designed and built for all. Operator, we would now like to open the call up for questions..

Operator

[Operator Instructions] Our first question comes from the line of Saket Kalia of Barclays. Your question please, Saket..

Saket Kalia

Okay. Great. Hey, Andrew. Hey, Debbie. How you doing? Thanks for taking my questions here. Andrew, maybe just for you. Appreciate the macro commentary, very helpful. I think we all try to speak to at least a subset of your partners through the quarter.

And frankly, through the quarter, some of those checks, albeit limited, were mixed or soft, right, of course, reflecting the macro. Maybe the question that I have for you is, I was wondering if you saw that as well.

And if you did, whether some of those trends have maybe continued here through the second quarter?.

Andrew Anagnost

Yes, Saket. Good to see you by the way. Good to talk to you. So, yes, let me tell you what we saw and consistent with what people heard from the partners.

So, whenever we have a large event like ending multi-year, what happens is partners and teams tend to pack up deals into that event, they even pull pipeline forward to try to get it into the event, so that they can kind of close their deal, get things trued up around the event. This happens every time consistently when we have event like this.

It's one of the reasons why we try to align these events with quarter-end, so we don't have conversations like this. So, if that was the case, what you would have expected is that business would rebound to kind of expected levels post the end of the quarter, which is exactly what happened.

It's exactly what we're seeing at the beginning of the quarter [indiscernible] and we're back to what we would expect to be [indiscernible].

Debbie, you want to add anything about the macro environment that we haven't said already or anything -- any commentary that might help understand how the quarter progressed?.

Debbie Clifford

Sure. So, overall, our leading indicators remain broadly the same as what we saw last quarter. We saw usage grow modestly. We saw record bid activity on BuildingConnected. We continue to see cautious optimism from our channel partners. New subscriber growth decelerated a bit quarter-over-quarter, but renewal rates improved.

Also like last quarter, Europe was a bit better, the U.S. was a bit worse, Asia was about the same. So, net-net, the overall momentum of the business was somewhat similar to what we saw last quarter with some puts and takes. It's all in line with the guidance expectations for the year and it's consistent with macro trends.

Current RPO growth is a good forward indicator for you. It was the same as last quarter at 12% growth. And as we've said before, the business is going to grow faster in better environments and slower in more uncertain environments, but our goal continues to be to set ourselves up for success in fiscal '24 and beyond..

Saket Kalia

Got it. That's really helpful, Debbie. Debbie, maybe for my follow-up for you. Great to see the cash flow strength this quarter, well ahead of what we were expecting. I was just wondering if you could just zoom into what drove that.

And maybe just looking forward, how you're sort of thinking about the shape of cash flow this year, particularly where we trough here in fiscal '24? Does that make sense?.

Debbie Clifford

Yes. So, Q1 free cash flow was strong for a couple of reasons. First, cash collections from the last month of billings in fiscal '23 were strong. Second, we also saw favorable linearity and early renewals in Q1 that were driven by the end of multi-year build upfront.

And then, third, as I mentioned on the call, after the winter storms in California, we received a federal tax payment extension for the third quarter. Our overall expectations for free cash flow on the year, including linearity, are unchanged.

We still expect that we're going to generate about half of our free cash flow in the second half of the year, with heavier weighting to Q4. Some of the factors to think about across Q2, Q3 and Q4, we have the full quarter impact from the switch to annual billings. In Q2, remember that we had some early renewal billings that were pulled into Q1.

And then with that tax payment extension to Q3, that has a positive impact to free cash flow in Q1 and Q2, but a negative offset in Q3. But overall, I just would reiterate that our expectations are unchanged and that we expect to generate about half of that free cash flow in the second half of the year..

Saket Kalia

Got it. Very helpful, guys. Thank you..

Operator

Thank you. Our next question comes from the line of Jay Vleeschhouwer of Griffin Securities. Your question please, Jay..

Jay Vleeschhouwer

Thank you. Good evening. Andrew, you referenced the effect on channel behavior in the quarter as a result of the billing change. But more broadly, there are some other evolutions that your sales model is going through affecting not just the VARs but also the VADs.

And I'm wondering how you're thinking about the operational or execution risks associated with that evolution which certainly goes beyond Q1 in terms of perhaps either demand generation, fulfillment of which you'll be doing more of on your own, perhaps the elements of channel comp as they change with the back end change.

So maybe just let's talk about some of those ongoing executables that you need to get right vis-à-vis the sales model. Then, I'll ask my follow-up..

Andrew Anagnost

Yes, Jay, that's a great question. So, one of the things that I'll say like first upfront is why are we exploring some of these things. And it's a great example of what we're doing with Flex in particular.

We're doing these things because our customers get a much more instant on self-service like experience kind of more like an e-store experience from all their transactions. But they also get the added bonus of support that local and connected to them through their VARs. They get service and other types of supports from their VARs locally.

It also allows us to really get a lot of visibility about what their usage patterns are, how they're using the product, and then also share that visibility with our partners and other people so that we can understand these customers better. So, there's lots of great things about it.

But more importantly, rolling out kind of changes like that and exploring these kinds of new models and something like Flex, which is a lower volume offering right now, those doing quite well, gives us a lot of opportunity to learn a lot of things and work through a lot of things.

Debbie, why don't you talk specifically about some of the things that we've been learning from Flex as we've been working through all of these new transaction models..

Debbie Clifford

Sure. Yes. So, as Andrew mentioned, we launched this Flex agency model in Q1. We have learned a lot. Some of the things that we've been learning are things like the importance of driving a seamless vendor setup process. These are situations where customers will have to set up Autodesk as a vendor as opposed to a partner.

We're getting insights and learnings around -- by having access to more data, and we're able to better forecast with having that access to better data. So, like Andrew mentioned, as with anything in this area, we're focused on testing and learning as we go.

We want to make sure that we have scalable processes for all stakeholders and the ecosystem, and we'll continue to keep doing that..

Jay Vleeschhouwer

Okay. As follow-up, Debbie, at the meeting two months ago in your slide with regard to double-digit growth or what you called sustainable double-digit growth, you had eight different line items referring to volume as component of your growth.

When you look out over the balance of the year, what do you think might be of those perhaps the two or three most important volume drivers to the business?.

Debbie Clifford

That's an excellent question, Jay. I mean, the view that I talked about from Investor Day hasn't changed much, granted our Investor Day wasn't very long ago, so that's a good thing. But we're going to be looking to continue to drive volume from all the different areas or growth vectors that we have.

So, things like our investments in AEC, the proliferation of BIM, expansion and infrastructure, driving more growth from construction. I think what was interesting for us this quarter was really seeing continued strengthening of our renewal rate, because, ultimately, with higher renewal rates, that becomes a net volume driver for us.

And that really goes down to the investments that we've been making in our customer success teams, who are really doing an excellent job of driving those renewal rates up, driving success with our customers, because that's a really important part of keeping the volume engine going at Autodesk. So, those are some initial thoughts, Jay..

Jay Vleeschhouwer

Okay. Great. Thank you, both..

Andrew Anagnost

Thank you, Jay..

Operator

Thank you. Our next question comes from the line of Adam Borg of Stifel. Your line is open, Adam..

Adam Borg

Great, and thanks so much for taking the questions. Maybe for you, Andrew, I know at Analyst Day, you talked a lot about the broadening opportunity around serving the owner market and not just in conceptual design, but during operations. So, I know it's still early in this journey.

Maybe you could share with us how that message is resonating and as you look to expand into AEC and obviously [indiscernible]?.

Andrew Anagnost

Yes. So the way -- the vector that we have into that space right now is through Tandem. And the best way to talk about that is the increase in people using more modeling assets in Tandem and the monthly active usage rates that are going associated with that, we're starting to see very nice pickup with that.

We're engaging with a series of owner-level customers on direct collaborations in terms of how Tandem serves some of their needs, where it has development requirements to serve some additional needs. So, we've got a lot of really good customer engagement, which is definitely where you'd expect to be at this point in the process.

So, we're really happy with the progress here and we're happy with the level of engaging with Tandem. Tandem is getting a lot of visibility, a lot of interest and a lot of focus with owners, but also with people that serve owners that want digital twins and things associated with digital twins from, say, other types of vendors..

Adam Borg

That's really helpful. Thanks for that. And maybe, Debbie, as a quick follow-up. I think you've mentioned in the script about repurposing 250 roles in the quarter. Maybe you can provide a little bit more detail there? Thanks, again..

Debbie Clifford

Sure. So, uncertainty really just is the new normal. I think we're all living this. Since we last reported earnings, we've seen a bunch of stuff happen. There was a major regional bank crisis. We're seeing deadlock discussions about the debt ceiling in Congress.

The Fed, just a few weeks ago, acknowledged that those things could have an impact on the economy, but so they didn't know how. We're in the same boat. But it's very important to us to deliver on our margin goal. So, it's against that backdrop that we're taking a prudent approach to how we manage the business, that means tightening the belt a bit.

So, in Q1, we did some repurposing of roles to allow us to reinvest. And in Q2 and onward, we proactively taken steps to slow the pace of our hiring to ensure that we don't get ahead of ourselves on spend in light of this continued macro uncertainty.

And we think that slowing spending earlier in the year provides more investment flexibility versus trying to slow spending later in the year. Again, our goal continues to be to set ourselves up for success since fiscal '24 and the long term..

Adam Borg

Excellent. Thanks again..

Operator

Thank you. Our next question comes from the line of Joe Vruwink of Baird. Your question please, Joe..

Joe Vruwink

Great. Hi, everyone. Maybe just a bit of clarification on near-term performance and reconciling, just the comment. I think, leading indicators around product usage, that's fairly consistent. But then, the new sub growth decelerating in the Americas. I guess, normally, I think the leading indicators kind of predict that.

So was this something around new subs that just kind of popped up in the quarter?.

Andrew Anagnost

No, it was consistent with what we were seeing in our monthly active user trends. That's how the monthly active user trends are so good at predictive behavior. We kind of expected a slight decrease in velocity in the Americas and more of an increase in Europe.

So, it's consistent with the indicators we see and it's consistent with the indicators moving forward as well..

Joe Vruwink

Okay. Great. Thanks for that. And then, just, I guess, I get the AI question.

Just in terms of capabilities that already exist on the platform, thinking about things like Space Maker or the Generative Extension on Fusion, have you started to see kind of an uplift in interest just as more industries are studying adoption around AI? And is there anything you've seen to this point maybe specifically around video, media content where you start thinking about maybe changing product road maps, or all just based on kind of the pace of innovation that's coming out?.

Andrew Anagnost

So, yes, first let's be very clear. We've been talking about AI for a long time, all right? And we've been building machine learning models into our application for a while now. So, there's already significant velocity inside of Autodesk conversations. What's changed is ChatGPT created a version of AI that everybody understood.

So, we're all now having a common conversation about what AI can and cannot do and how it functions as a [indiscernible] or an assistant or a co-creator in these processes. So, make no bones about it, we've been working on these things for a while. This isn't a course and speed change for us. And I want to be super clear about that.

Now, like I said, we've been in Construction IQ. Space Maker is no longer a product anymore, it's Forma now, which we rolled out, which even has more enhanced underpinnings or associated with machine learning.

You probably -- if you follow what we do in our AI Lab, we published a lot of work on kind of fairly advanced things around large models and things that you can do with creating 3D models and representations using machine learning. So, we've been out there with this for a while.

What it does allow us to do, it had a very meaningful customers about -- conversation with our customers about "Look, we've been telling you that this was going to be a cocreation technology.

Take a look at what you're seeing out there with the large language models and the things that you're getting from OpenAI and see how this kind of can be evolved to creating 3D building information models, more complex models, complex design, sustainability decisions, optionality, all the things associated in some of the things you're seeing inside of Forma." So, the customers now get it.

They kind of get the connection between what we're doing and what we said it was going to do in the future, because there's an example here that everybody understands. And I think that's super powerful. So, it's current course and speed for us.

We're going to be probably speeding up a little bit on some of our work with more larger and complex models, but this is something we've been doing for a while..

Joe Vruwink

Okay. Thank you, Andrew..

Operator

Thank you. Our next question comes from the line of Michael Funk of Bank of America. Your line is open, Michael..

Michael Funk

Yes, thank you for the questions. So, Debbie, you mentioned you highlighted the slowing sub growth and usage has been strong.

Can you help me understand the relationship if any between those two? And is the sub growth simply a factor of customers tightening their belts more due to the uncertain macro that you highlighted a few times, or is there some other -- something else behind that?.

Debbie Clifford

Yes, thanks. So, the biggest factor driving the sub growth that we saw in Q1 was actually the end of sale of the multi-year upfront contracts. So, Andrew mentioned it at the top of this Q&A session, but remember that the demand pattern that we saw during the quarter was impacted by that end of sale. Before the launch, we saw higher volume.

And then, post launch, demand was lighter. That's typical of what we see when we launch programs like this to the market. But what it meant was that, on a net basis, the new piece of our business decelerated as we headed out of the quarter. So, Andrew also mentioned that over the last several weeks in May, we've seen that demand bounce back a bit.

And it's generally in line with our expectations at this point..

Michael Funk

Okay. Great. And then one more. Debbie, you also mentioned tailwind in second half, one being the EBA renewal pattern, adoption and usage has been strong there, I think you noted.

Can you give us some more detail just on the moving pieces around the EBA renewals? Is it contract changes, pricing changes, what will be driving that tailwind in the second half of the year around the renewals?.

Debbie Clifford

Sure. So, maybe I'll just take a step back and talk about revenue linearity overall and then double click a bit into EBAs. So, to recap, we're expecting revenue growth deceleration in Q2, followed by growth acceleration in the back half of the year that's consistent with historical seasonal patterns for Autodesk.

And it was built into our annual guidance from the start. When we look at things by quarter, in Q2, we have the peak of FX and Russia and their drag on revenue growth. In the second half, the negative impact from exiting Russia goes away, and that drag from FX reduces as the year progresses.

And then, we have that big cohort of EBAs, particularly in Q4, those are deals that renewed three years ago, at the beginning of the pandemic, where subsequent adoption and usage have been strong. And it's that deal flow that drives that seasonal growth acceleration primarily in Q4.

We thought -- you can go back and look at our opening commentary back in fiscal '21 for Q4 where we talked a bit about those deals they tended to be in the auto space.

And so, we're anticipating that those deals will come through and we think the fact that they've had good adoption and usage is a good indicator that we're going to see that behavior happen in Q4 as expected.

So, overall, I mean, our business, the momentum is pretty consistent with what we've seen for a while here now and the assumptions that we have embedded in our guidance reflect, but we've been seeing for a while and we remain on track to achieve our full year financial goals.

And I can't reiterate enough that we continue to try and set ourselves up for success in fiscal '24 and beyond..

Michael Funk

Great. Thank you for the questions..

Operator

Thank you. Our next question comes from the line of Matt Hedberg of RBC. Your line is open, Matt..

Matt Hedberg

Great. Thanks for taking my questions, guys. Andrew, in your prepared remarks, you talked a lot about AEC and obviously construction. This is an area obviously as we all know that's been sort of laggard to adopt SaaS and cloud. Can you talk about sort of where we're at in this evolution? The pandemic is behind us now, I think.

But like, are you starting to see some of these field workers, some of the folks that are sort of like behind the scenes on construction starting to sort of embrace the technology more so? Is it a generational thing? Just any sort of like incremental sort of catalyst for further construction cloud adoption?.

Andrew Anagnost

Yes, it's a good question the way you phrased that around incremental catalysts. I think actually the rising adoption is becoming its own catalysts in many respect. I mean, obviously, we're continuing to see good growth in construction. We're seeing solid adoption. We're seeing really significant adoption in our EBA account.

And adoption tends to lead to more adoption, because the people who adopt these technologies and start using these technologies on a regular basis tend to have higher bid precision, higher bid accuracy, tend to be able to execute more effectively during the projects, manage cost better and all things associated with that.

And that's a flywheel effect, because if you're better able to manage the cost of the project, you're better able to estimate the next project, bid on that project and win an envelope that preserves your margins. So that is kind of the biggest thing that's going on right now out there in the industry is the flywheel effect.

There's no kind of generational catalyst that's yet coming in here. But I will tell you there's one other thing that's persistently out there that's driving people to look towards technology, and it's they can't hire people, all right? More and more, they are not able to fully staff their sites and their jobs to the level that they were in the past.

So, they need these productivity gains from technology. And it's between that and the flywheel of competition, there's kind of a momentum here that I don't see slowing down..

Matt Hedberg

Super insightful. No, that's great. Thanks again for the time tonight, guys..

Operator

Thank you. Our next question comes from the line of Tyler Radke of Citi. Please go ahead, Tyler..

Tyler Radke

Yes, thanks for taking the question. So, just a couple of questions on the indicators that you saw in the quarter. Andrew, you talked about bid activity at record levels in BuildingConnected.

I guess, should we be thinking about that as a sign of health in the end markets or more of a function of buildings connected, strong competitive position and digitization tailwinds? And then, just curious if you could talk about the slowdown in new subscriptions or deceleration that you saw.

Was that more on the AEC side or any end market or where -- the segment where you saw that?.

Andrew Anagnost

Okay. So, let me address the next part of the question. Kind of the answer to your BuildingConnected question kind of both, all right? BuildingConnected certainly active. There's lots of activity going on there. But remember, it's the trend that matters.

So, if the trends continue to indicate a large degree of bid activity, that means there's a large degree of bid activity out in the ecosystem. And what also is important to recognize is, our customers and especially in the AEC land, they're still working through backlogs.

I mean, every customer I talk to has the same issue or same opportunity, however you want to look at it, that they still have to work through their backlog, they're still having trouble getting enough people to get the projects moving at the right kind of pace and so on and so forth. So there's still a backlog out there.

But the trend on bid activity is real and it absolutely represents what's going on in the U.S. market in particular.

Now with regards to deceleration and rebound in Q2 around volume, there was no hotspot, right? It was kind of uniformly the same across the board, right? So, it was more kind of dynamics of the business rather than any kind of particular hotspot..

Tyler Radke

Great.

And then, just on the EBA renewals for the second half, are you expecting those to renew at kind of the typical net expansion rate that you see for the broader company? Or are you expecting anything different just given the environment?.

Andrew Anagnost

Well, I mean, I'll let Debbie follow-up on this. But one of the things that she highlighted was that a lot of these EBAs that are coming due were ones that were renewed during the pandemic at a time where there was downward pressure on their activity and their usage and [indiscernible], things have obviously changed significantly since then.

So, Debbie, do you want to comment on kind of the average relative difference within -- with these cohort versus [direct to] (ph) company?.

Debbie Clifford

Yes, I mean, I would say that in terms of what we're baking into our guidance, we're assuming that these customers renew at reasonable levels. I'm not going to get into more specifics beyond that. What's key is that they renew and we feel good about that happening given the fact that there has been high adoption and usage across these EBAs.

It's a big cohort for us. We saw that performance back in fiscal '21. It was also an equally unusual economic time at that point. And so, I don't see this situation as any different. I think we've set the guidance at a reasonable point..

Tyler Radke

All right. Thank you very much..

Operator

Thank you. Our next question comes from the line of Bhavin Shah of Deutsche Bank. Your question please, Bhavin..

Bhavin Shah

Great. Thanks for taking my question.

Andrew, just given what's going on with the debt ceiling, any sort of impact that we should think about regarding federal deals and the pace of that business? And then, kind of related point, can you give us an update on where we are into the FedRAMP Moderate for Docs and BIM 360, Collaborate Pro?.

Andrew Anagnost

Yes. So let me talk a little bit about [FedRAMP] (ph) here. So we've submitted all our paperwork. Our systems are ready. Autodesk systems are already for FedRAMP. We're just waiting for the government to come back and give us the approval and move forward. So, that's all proceeding ahead for us.

We're waiting for the government to respond now at this point. With regards to the debt ceiling, I'm not really going to speculate on the debt ceiling. I would say that I think the things that impact us are bipartisan priorities. These are things that both parties want. Infrastructure and the things associated with that, they all want this.

So, I would suspect the things that matter a lot to Autodesk and to Autodesk business are probably not going to be impacted by all the activity going on in D.C. right now..

Bhavin Shah

Helpful there. And then just maybe a quick pivot to Construction Cloud. I know you talked a little bit about combining sales [within organization] (ph).

Can you just maybe elaborate on some of the assumptions in terms of what you're expecting in terms of disruption, for how long? And then maybe when should that [be merged] (ph) and drive better performance in productivity?.

Andrew Anagnost

Yes. So, first, let me kind of clarify exactly what we did. So, we merged the independent construction team with the mainline sales team inside the company. And we had kind of a few goals in mind there. One, we wanted to get a little bit more emphasis on the territory business that covers all of our business.

And we wanted to make sure that we were focused not only on pure construction accounts, but design and construction accounts where we actually have pretty significant competitive advantage and there's a lot of opportunity.

So this just kind of sharpened the pencil on kind of pursuing those opportunities in kind of a concerted way and kind of getting all the energy behind one effort. And we're pretty confident that, that's exactly what we're going to get.

But of course, when you do that, sales reps get new accounts, people get moved from accounts, so they'll get new responsibilities. So it creates a little bit of short-term disruption. We absolutely expect that to work its way out over the next quarter or two. And we expect it to kind of compound benefits from doing us moving forward..

Bhavin Shah

Makes a great sense. Thanks for taking my questions..

Operator

Thank you. Our next question comes from the line of Steve Tusa of JPMorgan. Your question please, Steve..

Steve Tusa

Hey, guys. Good evening. The -- just if we were to see a continued decline in the things like the ABI or kind of an isolated decline in new office markets, if you will, can you just remind us of, is that even a big enough exposure to matter for you guys? Or just kind of remind us what part of your business is exposed to those trends just on the macro.

And then secondly, if I just do the simple math on half-over-half free cash flow, that implies negative free cash flow for the second quarter to get it back to the half of the year. Is that kind of the right construct? Thanks..

Andrew Anagnost

I'll let Debbie answer the second half of that, but let me talk more broadly about what's going on in the AEC sector. With everything in these sectors, there's always puts and takes, right? And what you see is one sector sees some kind of decline in activity, nobody is building new office buildings or whatever.

And in other cases, some people are seeing increases in activity. And that's exactly what we're seeing. I'll give you a classic example of what goes on in this environment. So, people are pulling back from office space right now, pretty significantly downsizing their offices.

And as a result, what's happening is that there's more competition for getting people to sign leases for new office space. So what that's leading to is a kind of modernization of office space to accommodate new ways of working or to attract the best renters. And people are spending money on that, which is offsetting money being spent in other places.

And we've taken all of this into account as we look forward into our business throughout the year. So that kind of gives you a sense for how billings shift around and how money moves around and what our relative sensitivity as to some of these things.

A lot of these indicators you talked about, they kind of tell you what's already happened, not what's going to happen necessarily. That's why we like to pay attention to kind of our leading indicators around monthly active usage of the products. Now, I'll turn it over to Debbie to discuss the other part of your question..

Debbie Clifford

Yes, in terms of free cash flow, I'm not going to get into specific guidance by quarter, but I would say directionally, I think you're thinking about it in a reasonable way. And just to recap some of the things, remember, with the tax payment extension to Q3, we'll have a negative also in Q3.

And some of the things that I outlined in terms of the linearity of free cash flow on the year are the things that you should be thinking about. So, I recommend going back and listening to some of those points because that will help you model free cash flow by quarter..

Steve Tusa

Yes, great. Thanks for the details. Thank you..

Operator

Thank you. Our next question comes from the line of Sterling Auty of MoffettNathanson. Your question please, Sterling..

Sterling Auty

Yes, thanks. Hi, guys.

So, just wondering, given the comments about the second half acceleration, does that mean that you're expecting the peak of the macro impact to really hit next quarter? Or is some of that acceleration more just due to improvement in Autodesk execution based on some of the changes that you had mentioned during the prepared remarks?.

Debbie Clifford

So, Sterling, what I would say is we're not assuming any peak or trough in macro. We have a range for our guidance in our 7% to 9% range for revenue. We have the ability to address whatever macroeconomic situation that we see.

And what we saw in Q1 was consistent with our general expectations on the year, and we've continued those expectations as we think about our outlook for the rest of the year. And you can see that our outlook is in line.

What's really driving the change in linearity in our revenue growth is some of the things that I talked about, so seasonality, the acceleration that we expect from EBAs in the back half of the year, the impact from FX, and not having the drag from the exit of Russia anymore.

So it's more about those things than it is about any fundamental underlying changes in our assumptions related to macro..

Sterling Auty

That makes sense. And then Andrew, one for you. When you think about the long-term opportunity for generative AI, LLMs, conversational interfaces, et cetera.

Do you view this as something that's going to ultimately raise the ARPU and/or prices for Autodesk solutions, given the additional value add? Or is it going to be more differentiation at the current price levels just so you can drive more market share?.

Andrew Anagnost

I think it's going to be a little bit of both, all right? In some cases, we're going to be delivering significantly more value to certain types of customers and we expect to charge for that value.

In other cases, it's going to be a massive productivity enhancement for customers, and those customers are going to use that productivity to get more business, increase their book of business and it will be a competitive advantage for Autodesk.

So it's a little bit of a mix of both, all right? But either way, we're going to be helping customers be a lot more efficient in one area and be much more creative in other areas in terms of designing what they need to do and how they need to design things..

Sterling Auty

Got it. Thank you..

Operator

Thank you. And that is all the time we have for Q&A today. I would now like to turn the conference back to Simon Mays-Smith for closing remarks.

Sir?.

Simon Mays-Smith

Thank you, Latif, and thanks, everyone, for joining us on the call. We look forward to catching up with you next quarter. If you have any questions, please just e-mail us on simon@autodesk.com. Latif, back to you..

Operator

This concludes today's conference call. Thank you for participating. You may now disconnect..

ALL TRANSCRIPTS
2024 Q-4 Q-3 Q-2 Q-1
2023 Q-4 Q-3 Q-2 Q-1
2022 Q-4 Q-3 Q-2 Q-1
2021 Q-4 Q-3 Q-2 Q-1
2020 Q-4 Q-3 Q-2 Q-1
2019 Q-4 Q-3 Q-2 Q-1
2018 Q-4 Q-3 Q-2 Q-1
2017 Q-4 Q-3 Q-2 Q-1
2016 Q-4 Q-3 Q-2 Q-1
2015 Q-4 Q-3 Q-2 Q-1
2014 Q-4 Q-3 Q-2 Q-1