AZZ - NYSE

Good day, and welcome to the A

Thank you, operator. Good morning, and thank you for joining us today to review A

Thank you, Sandy. Good morning, and thank you for joining us today. I will discuss the first quarter results and cover our outlook for the rest of the year. Jason Crawford, our newly appointed CFO, will walk through our detailed financial results, and David Nark will provide an industry update on our end markets. Then we'll open it up for some questions. Our first quarter results met the higher end of our expectations, and we are very pleased with the performance and emphasis on execution in both segments. We reported record quarterly revenue of $413 million, improved segment profitability and expanded EBITDA in both dollars and in terms of margins. Our results generated significant cash flow from operations for the first three months of [technical difficulty] topline revenue growth by [technical difficulty] versus the prior year, and Precoat Metals sales increased [technical difficulty] for the prior year [technical difficulty] both segments. In the first quarter, we benefited from strength in a number of our end markets, including construction, bridge and highway, transmission and distribution and renewables. Non-financial potential project spending for both public and private projects is now tracking higher than pre-pandemic levels. This year, we have [technical difficulty] public sector construction, which demonstrates [technical difficulty] energy and manufacturing that David will cover [technical difficulty] private spending and commercial construction continuing to be [technical difficulty] interest rates. The shift [technical difficulty] residential construction projects. Continuing with our first quarter results, Metal Coatings EBITDA margin grew to 30.9%, exceeding the prior year and slightly ahead of our target margin range of 25% to 30% due to both [technical difficulty] and zinc productivity improvement. Precoat Metals EBITDA margin of 20.2% was also meaningful. As we have noted before, that any reasonable uptick in volume helps drive margins above the 20% mark and towards the upper end of our communicated range of 17% to 22%. In addition to the solid execution of our operational initiatives in the first quarter, we also completed a public offering of common stock to fully fund the redemption of A

Good morning. As Tom mentioned, we reported first quarter sales of $413.2 million compared to $390.9 million in the prior year quarter. Total sales increased by 5.7% over the first quarter of last year, with Metal Coating sales up 4.7% and Precoat Metals sales up 6.5%. The first quarter's gross profit was $102.7 million or 24.8% of sales compared to $97 million or 24.8% of sales in the prior year quarter. Lower zinc costs in the Metal Coatings segment and productivity improvement in both segments helped offset wage and other inflationary headwinds, resulting in steady gross margins as compared to the prior year. Selling, general and administrative expenses were $32.9 million in the first quarter or 8% of sales compared to $31.5 million or 8.1% of sales in the prior year first quarter. Operating income improved to $69.7 million or 16.9% of sales compared to $65.5 million or 16.8% of sales in last year's first quarter. Interest expense for the first quarter was $22.8 million compared to $28.7 million in the prior year. The decrease is primarily due to consistently paying down debt and our lower weighted average interest rates from various debt repricings that have occurred over the last 12 months. Equity and earnings of unconsolidated subsidiaries for the first quarter increased to $3.8 million compared to $1.4 million for the same quarter last year. This increase is due to higher earnings from our 40% JV ownership in AVAIL. Current quarter income tax expense was $11.4 million, reflecting an effective tax rate of 22.4% compared to 25.3% in the prior year quarter. Reported net income for the first quarter was $39.6 million compared to $28.5 million for the prior year quarter. As Tom mentioned, we redeemed our company's 6% Series A preferred stock in May 9 of this year. The redemption premium, the amount in excess of the face value of the preferred stock of $75.2 million was recorded as a dividend in our first quarter income statement. This resulted in a GAAP loss to common shareholders of $36.8 million and a GAAP diluted loss per share of $1.38. Since our non-GAAP measure for adjusted net income excludes the Series A redemption premium, A

Thank you, Jason, and good morning, everyone. Momentum from year-end in February carried into the first quarter with strength in a number of end markets. For Metal Coatings, we reported record high sales driven by high single-digit volume expansion for the quarter. As Tom mentioned, we are now seeing an elevated number of public work projects related to essential industries that include bridge and highway, construction, utility T&D, renewables, namely solar, as well as critical chip plant construction projects. We believe that public sector has ongoing spending strength, which we expect to continue this year. The Precoat Metals segment continued to perform better than the market in the first quarter with total volume increases in the mid- to high single-digit range. In fact, certain end markets saw significantly higher increases ranging in the high single- to double-digit growth range for construction, HVAC fueled by inventory build of cooling products and the implementation of a new refrigerant change and transportation based upon a rebound in the recreational vehicle market. In addition, Precoat works on essential data center construction projects by prepainting steel for the insulated wall panels used in modern data centers, which is a growing market for them. We remain enthusiastic about public sector spending and believe if interest rates soften later this year, it could signal growth in private sector spending and commercial construction. We also expect to continue to see secular growth trends and reshoring of manufacturing, the migration to aluminum and prepainted steel as well as the conversion from plastics to aluminum in the beverage space that will continue to benefit our business. As Tom mentioned, A

Thank you, David. As Dave mentioned, we are optimistic about our business prospects this year and appreciate that our business is typically more brisk during the peak summer construction months. We also know that hurricanes, as we saw recently with Hurricane Beryl, and macroeconomic events or changes can impact our business. So we remain prepared for choppiness should it occur. While we don't have a crystal ball into what the economy holds the balance of this year nor the impact of the upcoming elections, we have accomplished what we set out to do in the first quarter. We established new records for adjusted net income, for adjusted EPS and for sales. So credit to both of our segment teams and also to corporate to accomplish the redemption of our preferred shares during the same quarter. Today, we are pleased to reiterate previous guidance, our fiscal 2025 sales guidance is $1.525 billion to $1.625 billion, adjusted EBITDA guidance of $310 million to $360 million, and adjusted EPS guidance of $4.50 to $5. Capital expenditures for the current fiscal year are expected to remain unchanged at $100 million to $120 million, including approximately $63 million related to the new greenfield plant. The equity and earnings from our minority interest in the AVAIL joint venture is expected to be $15 million to $18 million this year, and debt paydowns are planned in the $60 million to $90 million range. We are focused on paying down debt, and we'll continue to evaluate bolt-on acquisition opportunities that are beginning to enter the pipeline. Our long-term strategic plans include continuing to focus on growing the business organically and inorganically. We offer a highly differentiated value proposition to customers through a tolling model that positions us with fewer commodity and financial risks simply because we do not own the steel or aluminum that we coat. Our margin and return profiles position us well this year to continue to generate significant free cash flow and maintain adequate liquidity to grow the business while maintaining a solid balance sheet. This all translates into the creation of long-term value for our shareholders through our sustainable solutions. We continue to recognize that by investing in our people and relentlessly executing our strategy, we can continue to accelerate A

[Operator Instructions] And the first question will come from Lucas Pipes with B. Riley Securities. Please go ahead.

Good morning. Thank you so much for taking my question. The first one is just on your EBITDA guidance. Q1, very solid start to the year. You're annualizing to $376 million. Range for the full fiscal year $310 million to $360 million, so well below kind of where you've been annualizing, especially at the midpoint. You mentioned some factors, seasonality, election, the hurricane. But to what extent are you really conservative when it comes to the rest of the fiscal year?

Thank you very much for your comment. Yes Lucas, I mean, generally, we -- as you probably have seen, we tend to be conservative. So we're getting back into -- we had updated guidance in April, which was a little out of cycle and prior to then having the offering and then finishing up the quarter. But our normal cadence would be as we finish up the second quarter to look at updating guidance at that point. And that also gives us a better benchmark since we'll have finished what is typically a strong summer construction season. And the quarter is off to a good start. So we feel good about our outlook at this point. But just a little hesitant given nothing specific. So I don't want to say that. And Hurricane Beryl while it affected a couple of our sites, we're talking about a handful of mandates of production that was affected. And for the most part, while our sites had lost power, I think, in three sites -- three or four sites, our customers did as well down in Houston. So that work is still going to get done, and we'll clear that out within a few days. So overall, the net impact is very minor. And then in the longer term, almost sadly, in some cases, I'd say we do tend to pick up work after hurricane because you just look at some of the photos of the down transmission towers and poles and docks and peers and things like that, tends to be stuff that gets galvanized. So over the longer term, we tend to pick up work. And the economy, as we showed, we had record sales in the first quarter. Our teams are striving hard taking some market share, driving volumes. So we're confident, but we just want to get back into our normal conservative cadence of how we set guidance.

That's very helpful. Thank you. And then my second question is somewhat related. On the Metal Coatings business, you came in at an EBITDA margin of 31%. And I remember you've spoken to kind of 25% to 30% as a target before. And so I wondered, was there anything unusual going on that margins were above kind of the target range. I guess they can always go higher.

Yes, a couple of things. One,

I really appreciate all the color to you and the team. Continue best of luck. Keep up the good work.

Thanks Lucas.

Your next question will come from Stephen Volkmann with Jefferies. Please go ahead.

Hi. Good morning, guys. Thank you. And maybe just sort of pull on the same thread a little bit. I'm just curious, as you think about your end market exposures, are there any -- it doesn't sound like this, David, but are there any end markets out there that are kind of choppy and giving you some concern for the rest of the year? Maybe there was some inventory stock or destock that we should keep in mind? Just anything that would keep you kind of conservative on the top line outlook?

Great question. As you look at our stated end markets and the results, we saw growth across every stated end market other than the catch-all category of others. So kudos to the teams in both segments for strong performance there. When you look a little further into each segment, we saw some choppiness here and there, some give and take. But overall, we don't see anything that we really worries us or brings too much concern to us across either segment.

Okay. Great. Thank you. And then as I sort of skim through the 10-Q, I saw that there was some headwind on mix. Can you just elaborate a little bit on sort of what you're seeing there?

Yes. I think, again, as you look at each segment, we had some puts and takes through the quarter on mix. Nothing really that jumps out at us too much as far as any kind of issues or concerns. And again, I think when you look at the overall results by both segments, they were really solid.

Yes, agreed. Does this mix headwind continue? Or how do we think about forecasting that for the rest of the year?

No. I think for mix, it can shift. I mean our plants with -- particularly on the galvanizing side, we've got 41 different plants. And so they will chase. They do a couple of different things. They've got their customers that they focus on. And then as load shifts, they chase different segments of the market, different types of customers. So if they need load, they're going to go after structural stuff, or if structural stuff slows up, then they're going to chase some smaller, as I like to call, Soap Rope and Dope. So that could move, but it's not anything I'd say we typically forecast. It's just -- as we see it, then we can use it to explain what happened. But looking forward, I don't -- I wouldn't say that we're beyond maybe a weekly, monthly basis. It's not something that we have a lot of forecasting detail about. So we're anticipating normal mix going forward and continued good execution.

All right. I appreciate it. Thank you.

The next question will come from Mark Reichman with Noble Capital Markets. Please go ahead.

Yes, while sales were up in both business segments, it looked like the average selling price was down in Metals Coating due to the product mix and the average price was flat in Precoat Metals. So I was just wondering to follow up on that last question, what's your outlook for pricing? Will the results be more volume driven? Or do you expect kind of a change in the mix that might help the prices going forward?

I think we're generally seeing -- so a couple of things. As -- even though we've tried to separate zinc costs from our pricing models, the reality is when zinc starts to trend up, as it has been on the LME, it makes it easier to hold price. So -- because customers are expecting it, they see -- they know it's significant part of our cost of goods sold. So I'd say, as we look forward, it actually gets a little bit easier. Part of the problem of being a public company, we do talk about how the zinc cost is moving in our kettles. And as we talk about, it going down on our kettles, customers are going to ask, so why is your price going down too? So it's good to see this flip over a little bit and head back up. And like I said, we try to sell on the value add. We sell multiple services that beyond just the hot-dip galvanizing itself, and that includes transportation. So there's a lot of things that affect mix. But generally, I think we see prices holding as we look forward, supported by the fact that we still have inflation on virtually everything from wages to our acid, energy, you name it. And like I said, with zinc costs going up, and that usually kind of bodes well for our ability to continue to drive and deliver value pricing.

And the second question is you've got the take-or-pay contract for 75% of the output of the Washington, Missouri facility. And I guess that's what, $50 million to $60 million of annual revenue. Do you expect to sign additional contracts before the facility is completed?

I think that's possible. We've got other customers already. So this is not a new process for us. We actually have another plant in St. Louis that runs similar things just on a smaller -- with smaller capacity, so to speak. So we're balancing -- we're going to balance capacity and load as we ramp up. And the key thing for us is to ramp up the quality and the capabilities effectively so we will be looking for other customers. But keep in mind, we already do business with most of them. And so as we look and feel confident with it, we can move some of the demand and give us those opportunities. In this case, the reason for the contract was just given the amount of the investment. Typically, our contracts are probably a little bit looser than this one, so to speak. But yes, we'll be looking to get other customers to put some business in there so that we can run that effectively. And it is a new state-of-the-art line. So we anticipate being run very effectively, efficiently and cost effectively, too.

That's very helpful. Thank you. Much appreciated.

The next question will come from Kevin Gainey with Thompson Davis. Please go ahead.

Good morning, gentlemen. Congrats on the great quarter.

Thanks.

Maybe if we can start on Precoat margins, they were flat year-over-year. Is it more of like a 1-quarter phenomenon? Or are you guys -- what are you guys thinking for the balance of the year there? And then maybe how you see that over the longer term? Is there still opportunity to push those up?

Yes, there's still opportunities and a couple of things. One, the customer inventories in our plants has increased, which says, at some point, we're going to run that and paint it. So that tends to give us some confidence on the volume side of it. And as we can sustain the volumes, then we'll sustain those above 20% margins. There's other opportunities, too. I think both segment teams focused on operational excellence, driving outstanding quality. And I'd say on the Precoat side, we've got across the fleet of plants and 15 lines. We're going to have opportunities to improve quality, improve productivity, drive on throughput. So those are obvious things, I think that when you think about some of the distractions as you go back to fourth quarter last year, where we had too much customer inventory and it got in the way of our productivity, we're not going to allow that to happen again. So I think the 20% range is something we'd like to hold and continue to move towards the higher end of the 22% in the range.

That sounds good. And then maybe -- welcome to the call, Jason, I'll give you this chance to your cash flow. How are you guys thinking about being able to generate cash from working capital as the year progresses?

Yes. I think if you look at our last prior fiscal year, we really made a step change improvement in working capital. I think this year, if you look at our projections, then we're not necessarily projecting any step change. There's always opportunity, but really our focus is more operationally driving cash from there. So anything that we pick up from working capital, we'll be above and beyond that, but it's certainly not a number one focus given where we sit with our inventory levels and our other constituents within that working capital market.

I appreciate that color. And then just to squeeze one more in because you guys brought it up. Maybe if you can talk about the data center opportunity for Precoat. And if there's anything else you guys can give on that?

Yes. Just a little bit on that, Kevin. The data center market, obviously, is a large and growing market in the U.S. and has been. The Precoat business, in particular, has a customer where they're supplying prepainted steel to them and that customer makes a sandwiched insulated wall that is being used in a lot of that market. So it's a small but growing area for them. It's an initiative that they're focused on, and we're opportunistic about the future for that.

Yes. And I'd like to add too, even the -- into AIS, which we sold the majority of it, a lot of that was electrical -- well, five of the facilities produced electrical enclosures. And the skins on those enclosures were actually not prepainted. So that alone, the manufacturers that fabricate the enclosures that quite often form the basis or foundation of a data center form, so to speak, is opportunities. So there's lots of opportunities for us to continue to convert post-paint type things. In this case, the electrical enclosures themselves to pre-paint. So that's what the sales team is focused on and trying to just get customers to understand. We're going to capture 99.9% of the emissions, and we're going to do it far more efficiently, far more effectively and at a great cost. So that's what we like to pitch and it's what gets us excited. We have started doing some of that for now the AVAIL side.

Yes, that sounds great. Looking forward to it.

Appreciate the questions.

Your next question will come from Jon Braatz with Kansas City Capital. Please go ahead.

Good morning, everyone. Tom, a question for you. Broadly speaking, can you talk a little bit about the trend towards pre-coated steel and talk about relative to where -- what you were thinking back when you acquired Precoat and maybe where you think it is today? Is the trend accelerating the same? Can you talk a little bit about that?

Yes. I think a lot of it, the trend is tracking pretty much to how we had modeled it. I think what we're finding is more opportunities as -- we have a strong balance sheet, and we have access to cash. But working with customers to get them to get out of maybe their paint lines and things like that. We're seeing opportunities that probably more than we thought. They do take longer to convert, but there's just a good strong list of those opportunities. And then the -- on the aluminum side, that's probably been actually a little bit slower than we anticipated, but we do see that conversion. I'm sitting here, drinking water out of a painted metal can myself. So those things are happening. And so on one hand, we've got things moving faster. On the other hand, we've got some things moving a little bit slower. So overall, though, the record sales track into ahead of our models from that perspective. And then the margin profile, they're kind of dead center on what we had hoped for. So very, very positive overall. And I think what we're seeing with the sales teams is the ability to focus on these conversions. And as we read the weekly reports, we're winning a lot of battles and we hope that would continue. On the macro side, I think we still have to do a better job on the macro side of getting customers to understand the benefits of pre-paint versus post-paint. So that's work -- that's ongoing and the associations that we belong to as well as with our own sales teams. So I'd like to say we're still early innings on this conversion opportunity.

Okay. Thank you. And secondly, in the press release, you used the term, I haven't seen this before, improved zinc productivity. I don't think you're trying to imply that you're using less zinc in your galvanizing operations, but what does zinc productivity improvement?

Yes, zinc productivity. So we track this. It's one of our key operating metrics. The idea is you want to put just enough zinc on the metal to protect it perfectly, but not too much zinc so that you're layering it on, which also affects the appearance. So for us, that zinc productivity is just how effectively we utilize the zinc per pound or so to speak. So [technical difficulty] it's how effectively we can apply it, tools like Digital Galvanizing system, have made us operationally more efficient, more effective. We still have outstanding experienced kettle operators that do this, as I call it, to do it as a day job and make it look easy, but it's not. So that's a key measurement for us and something technically we're using the -- we're trying to use the optimum amount of zinc to provide outstanding quality, not having any rework, but not clump a bunch of zinc on the fabrication.

Does that -- is that making a big difference in the margins -- the improvement in the margins? How much does that help?

It's a decent -- it's got a decent impact. I don't want to give out too much competitive information. We do have some competitors on this call, but [technical difficulty].

Pardon me. It seems that our speaker line has dropped. Please stay connected while we reconnect. Pardon me, our speaker line has reconnected. The floor is yours.

Yes. Let's go ahead and if we can, operator, jump to the next individual on the queue.

And that next question will come from Mr. John Franzreb with Sidoti & Company. Please go ahead.

Thank you. Yes, all my questions have been answered.

Thanks, Jon. We're sorry for the disruption. We lost phone service here.

No worries. Okay. Thank you.

Thanks.

As there are no more questions, I would like to pass the call over to Mr. Tom Ferguson for any closing remarks.

Thank you, Operator. And thank you all for your time. Sorry for the phone disruption. But I look forward to updating you at the end of our second quarter, which will just be in a couple of months. So thank you all, and have a great day.