Good day, ladies and gentlemen, and welcome to Cree's Second Quarter 2015 Earnings Conference Call. [Operator Instructions] As a reminder, this conference call may be recorded. I would now like to hand the conference over to Mr. Raiford Garrabrant, Director of Investor Relations. Sir, you may begin. .

Thank you, Saheed, and good afternoon. Welcome to Cree's Second Quarter Fiscal 2015 Earnings Conference Call. By now, you should have all received a copy of the press release. If you did not receive a copy, please call our office at (919) 287-7895, and we'll be pleased to assist you.

Today, Chuck Swoboda, our Chairman and CEO; and Mike McDevitt, our CFO, will report on our results for the second quarter of fiscal year 2015..

Please note that we'll be presenting both GAAP and non-GAAP financial results in our remarks during today's call, which are reconciled in our press release and posted in the Investor Relations section of our website at www.cree.com, under Quarterly Results in the Financial Information tab. .

Today's presentations include forward-looking statements about our business outlook, and we may make other forward-looking statements during the call.

These may include comments concerning trends in revenue, gross margin and earnings, plans for new products and other forward-looking statements indicated by words like anticipate, expect, target and estimate..

Such forward-looking statements are subject to numerous risks and uncertainties. Our press release today and the SEC filings noted in the release mention important factors that could cause actual results to differ materially..

Also we'd like to note that we'll be limiting our comments regarding Cree's second quarter fiscal year 2015 to a discussion of the information included in our earnings release. We will not be able to answer any questions that would involve providing additional financial information about the quarter beyond the comments made in the prepared remarks..

This call is being recorded on behalf of the company. The presentations and the recording of this call are copyrighted property of the company, and no other recording, reproduction or transcription is permitted unless authorized by the company in writing..

Consistent with our previous conference calls, we are requesting that only sell-side analysts ask questions during the Q&A session. [Operator Instructions] We recognize that other investors may have additional questions, and we welcome you to contact us after the call by email or phone.

We're also webcasting our conference call, and a replay will be available on our website through February 3. .

Now I'd like to turn the call over to Chuck. .

Thank you, Raiford. Fiscal Q2 revenue was $413 million, which was on the upper end of our target range due to strong growth in LED lighting.

Non-GAAP net income increased 28% sequentially to $38 million or $0.33 per diluted share due primarily to improved gross margins and an $0.08 per share tax benefit related to the retroactive reinstatement of the federal R&D tax credit.

Excluding the catch-up tax benefit, non-GAAP earnings per share would have been $0.25, which was above our target for the quarter. .

Lighting revenue increased 33% year-over-year and 3% sequentially to $230 million, driven by double-digit growth in LED fixtures, which more than offset the expected lower LED bulb sales; LED revenue decreased 29% year-over-year and 13% sequentially to $152 million due to the lower LED demand primarily in China.

Power and RF revenue increased 18% year-over-year and was similar to Q1 at $31 million..

Q2 non-GAAP gross margin increased 150 basis points sequentially to 33.9% due primarily to improved lighting margins, which more than offset the lower mix of LED sales. .

Lighting segment margins increased to 28.1%, driven by improved lighting execution and a more favorable mix; LED segment margins were similar at 39.1% due to strong factory cost management, which offset significantly lower factory utilization; power and RF segment margins were slightly lower at 55.5%, primarily due to product mix..

Q2 non-GAAP operating margin was the same as Q1 at 8.2%. This is better than targeted and reflects the improvement in our lighting business and ability to offset the slowdown in LEDs. Company backlog for Q3 is slightly behind this point last quarter.

We target flat to higher lighting demand in the quarter to be offset by slightly lower LED demand due to normal seasonality and the Chinese New Year holiday. .

We are well-positioned to continue to win in LED lighting. Our product pipeline is strong. We're building good sales momentum and our brand is growing in the market. While the LED competitive environment remains challenging, we believe that our high-power LED technology positions Cree for long-term success in high-performance LED lighting applications.

.

The Power and RF product line also continues to deliver good revenue and profits. Based on our view that we are well-positioned to continue to grow the company and increase profits over the next several years, we spent $266 million on share repurchases in the quarter. .

I will now turn the call over to Mike McDevitt to review our second quarter financial results in more detail as well as our targets for the third quarter of fiscal 2015. .

Thank you, Chuck. I will be providing commentary on our financial statements on both a GAAP and non-GAAP basis, which is consistent with how management measures Cree's results internally. However, non-GAAP results are not in accordance with GAAP and may not be comparable to non-GAAP information provided by other companies.

Non-GAAP information should be considered a supplement to and not a substitute for financial statements prepared in accordance with GAAP. A reconciliation of the non-GAAP information to the corresponding GAAP measures for all quarters mentioned on this call is posted on our website, along with the historical summary of other key metrics..

For the second quarter of fiscal 2015, revenue was $413 million, which was on the upper end of our targeted range of $400 million to $420 million.

GAAP earnings increased 9% sequentially to $12 million or $0.10 per diluted share for the second quarter of fiscal 2015, and non-GAAP earnings increased 28% sequentially to $38 million or $0.33 per diluted share. .

Non-GAAP earnings exclude $26 million of expense, net of tax, or $0.23 per diluted share from the amortization of acquired intangibles, asset retirement charges, fair value accounting on our Lextar investment and stock-based compensation..

GAAP and non-GAAP earnings per share were higher than our targeted range due primarily to improved gross margins and a onetime tax benefit related to the retroactive reinstatement and extension of the U.S. R&D tax credit.

Excluding the impact of the R&D tax credit, our GAAP earnings would have been $9 million or $0.08 per diluted share, which was at the upper end of our target range for the quarter. Excluding the impact of the R&D tax credit, non-GAAP earnings would have been $29 million or $0.25 per diluted share, which was above our target range for the quarter..

Q2 GAAP gross margins were 33.1% and non-GAAP gross margins were 33.9%, which excludes $3.4 million of stock-based compensation. This was at the upper end of our non-GAAP target of 33.5% plus or minus and represents 150 basis point sequential increase due primarily to improved lighting margins..

Lighting products revenue grew 33% year-over-year and 3% sequentially to $230 million, and gross profit grew 16% sequentially to $65 million for a 28.1% gross margin, which is a 320 basis point increase sequentially; LED products revenue declined 29% year-over-year and 13% sequentially to $152 million, and gross profit declined 12% sequentially to $59 million for a 39.1% gross margin, which was similar sequentially.

Power and RF products revenue grew 18% year-over-year and was similar sequentially at $31 million. Gross profit declined 3% sequentially to $17 million for a 55.5% gross margin. .

In determining gross profit for our segments, we do not allocate certain employee benefit costs, stock-based compensation and acquisition-related cost. These non-allocated costs totaled $4 million for the second quarter of fiscal 2015 and are included to reconcile to our $137 million GAAP gross profit..

Operating expenses for Q2 were $127 million on a GAAP basis and $106 million on a non-GAAP basis, both of which were within our targeted range. Non-GAAP operating expenses exclude approximately $14 million of stock-based compensation expense, $6 million of charges from amortization of acquired intangibles and $1 million for asset retirement charges.

Our non-GAAP operating income was $34 million or 8.2%, which was higher than targeted for the quarter..

Our Q2 GAAP and non-GAAP tax rate was minus 2% for the quarter, which was less than our 22.5% target for Q2. The Q2 tax rate includes the onetime benefit related to the retroactive reinstatement and extension of the R&D tax credit.

This includes a catch-up benefit for the first 3 calendar quarters of 2014 as well as a benefit for the December quarter, which we did not include in our targets because the reinstatement wasn't approved until late December..

We ended the quarter with $830 million in cash and investments, a $275 million decline sequentially.

The sequential decrease was due primarily to spending $266 million to repurchase 8.1 million Cree shares, $80.5 million to purchase a 13% ownership in Lextar and $55 million of capital expenditures, which were partially offset by $15 million of cash provided from operations and a net $105 million drawn on our line of credit within the quarter. .

Q2 free cash flow was negative $40 million due primarily to a $59 million working capital build.

Our working capital build was due primarily to a $43 million sequential decrease in accounts payable related to higher purchases earlier in the quarter versus our September quarter and a $22 million increase in inventory as LED inventory reductions were offset by an increase in lighting inventory. .

The lighting inventory build was higher than we had forecast due to a combination of increased in-transit inventory to account for recent increases in shipping times from Asia and a short-term increase as we qualify and ramp up 2 new subcontractors. If we exclude these 2 items, overall inventory was similar to Q1. .

For Q3, we target lower inventory levels as new subcontractors come online and further reduce capital spending, which should support positive free cash flow. .

Days sales outstanding were 48 days as compared to 50 days at the end of September and in line with our 50-day plus or minus target range. Inventory days on hand increased to 108 days as compared to 96 days at the end of September.

As mentioned earlier, we target lower lighting inventory levels going forward as the new subcontractors come online, which should bring our days back down to our 90-day plus or minus targeted range over time. .

Property, plant and equipment additions were $50 million and patent additions were $5 million in the second quarter. Capital spending in Q2 was lower than Q1 and in line with our lower spending plan for fiscal 2015.

For the second half of fiscal 2015, we target property, plant and equipment spending to be approximately $90 million, which is in line with our fiscal 2015 target of $200 million, plus or minus. .

In January, the company closed on a $500 million working capital line of credit facility and repaid the original $150 million facility.

The purpose of this facility is to provide the company's short-term flexibility to optimize returns on our cash and investment portfolio while funding share repurchases, capital expenditures and other general business needs. .

In October, our board authorized an increase to the facility in conjunction with the authorization to increase the share repurchase program to $550 million for fiscal 2015.

Fiscal year-to-date, we have spent $320 million to repurchase 9.3 million Cree shares, and the increased facility will help support additional repurchases while allowing us flexibility to maximize our cash investment returns. .

Lighting sales flat to slightly higher sequentially as higher indoor LED fixture sales offset seasonally lower outdoor sales; LED sales down single digits due to normal seasonality and the Chinese New Year holiday; and Power RF sales similar to Q2. .

We target Q3 non-GAAP gross margins in a similar range to Q2 at 33.5%, plus or minus, and GAAP gross margins to be 32.6%, plus or minus.

We target incremental lighting gross margin improvement in Q2 due to factory productivity improvements and cost reductions, while LED and Power and RF [ph] segment margins are targeted to be slightly lower due to lower factory loading. .

This Q3 target is based on a number of factors that could vary, including overall demand, product mix, factory execution and the competitive environment. Our GAAP gross margin targets include stock-based compensation expense of approximately $3.4 million, while our non-GAAP targets do not. .

We are targeting Q3 operating expenses to be similar sequentially as increased spending to fund our IP enforcement strategy is offset by reductions in other areas.

Our GAAP operating expense targets include $14 million of noncash stock-based compensation expense; $1 million of asset retirement charges and $6 million of charges for amortization of acquired intangibles..

Loss on disposal of assets is targeted to be similar to Q2. We target our Q3 and Q4 tax rate to be 17%. Our tax rates will fluctuate based on our overall earnings, the tax jurisdictions in which our income is actually earned and other tax benefits that may or may not become available to Cree in future periods..

GAAP net income for Q3 is targeted to be between $3 million to $8 million. Based on an estimated 112.4 million share -- diluted shares outstanding, our GAAP EPS target is between $0.03 to $0.07 per diluted share. Non-GAAP net income is targeted to be between $23 million to $28 million or $0.21 to $0.25 per diluted share.

Our non-GAAP EPS target excludes amortization of acquired intangibles, asset retirement charges, changes in the fair value of our Lextar investment and noncash stock-based compensation in the amount of $0.18 per share. .

Thank you. And I'll now turn the discussion back to Chuck. .

Thanks, Mike. We're focused on 4 priorities to drive our business in fiscal 2015. Our first priority is to leverage Cree technology to lower upfront customer costs and further improve payback. As we have demonstrated many times in the past, innovation is the key to leading the market, creating value for our customers and driving growth.

In Q2, we did just that by redefining high-power LEDs for lighting with the announcement of our new SC5 Technology Platform, which doubles light output to enable radically lower system costs by up to 40% in most lighting applications. .

The SC5 Technology Platform is built on Cree's industry-best silicon carbide technology and features significant advancements in epitaxial structure, chip architecture and an advanced light conversion system optimized for best thermal and optical performance. .

We announced the commercial availability of XLamp Extreme High Power LEDs, which are the first LEDs powered by Cree's revolutionary SC5 Technology Platform. The XLamp XHP50 and XHP70 LEDs provide twice the lumen output and improved reliability compared to previous LEDs of the same size. .

Based on initial customer feedback, we are confident that the groundbreaking technology of the new XHP LEDs offer significant system advantages to drive the next major innovations in high-performance LED lighting system design..

Our second priority is to continue to drive LED lighting growth and build the Cree brand in both the consumer and commercial markets. The LED lighting business grew 3% sequentially and 33% year-over-year in the second quarter, driven by double digit growth in lighting fixtures.

We've made tremendous progress growing both the volume and product breadth of our lighting business over the last several years. But I believe there is significant untapped potential in terms of both revenue and profitability.

The growth has stretched the capabilities of our supply chain and factories and will take time to realize our full potential as we work through the expected challenges that come with a fast-growing technology business..

In Q2, we introduced the third-generation Cree LED bulb, which delivers superior light performance while looking even more like an incandescent lightbulb through our innovative new 4Flow design. This new design provides the same cost savings and 25,000-hour lifetime that made the original Cree bulb America's best-selling LED bulb.

The bulb is now available at The Home Depot for $7.97 and is currently available for as low as $2.97 in certain markets with rebates. .

LED bulb shipments were lower but in line with our targets for the second quarter as quarterly sell-through increased during lighting season. Q2 sales were primarily driven by our Gen 2 bulbs, and we should start to see the impact of the Gen 3 bulb on our Q3 sales as it gains more shelf space and rebates become available in more markets. .

In addition, we recently announced the availability of the first in the family of Cree LED connected bulbs, combining the same Cree standard of superior light performance with new features for smart home environments..

Our third priority is to expand our work with manufacturing partners to enable growth in LEDs and lighting and allow Cree's factories to focus on the newest technologies that are not otherwise available in the market.

While current LED volumes are lower than we had forecast during the summer, we continue to develop manufacturing partners to support our targeted longer-term growth. We closed on our Lextar investment in Q2 and are working with them to supply LED chips as well as testing some initial lighting products..

We plan to continue to leverage Asia-based partners, but we're also working to expand our North American supply chain for certain volume lighting products. These new suppliers have similar cost structures when factoring in the higher shipping costs and logistics issues associated with bringing products to the U.S.

from Asia, and should enable us over time to reduce the ratio of finished goods inventory in transit..

Our fourth priority is to generate incremental operating margin through revenue growth and incremental operating leverage across the business. We made solid progress in Q2, as operating margin was 50 basis points higher than targeted at 8.2% due to the improvement in lighting gross margin.

The growth in Lighting and Power and RF has been offset in the first half of fiscal 2015 by the decline in sales of LED products. .

We are optimistic about the long-term growth prospects for LEDs based on initial customer feedback and our new SC5-based products and overall increased LED lighting adoption. But it will take time to work through the design cycles and current market conditions.

Fiscal Q3 is seasonally slower quarter for LEDs and lighting, but the LED business seems to have stabilized in the current revenue range, and we target overall company revenue growth in our fiscal Q4..

We continue to pursue our strategy to reaffirm the value of our intellectual property in the market and in our financial results. We recently filed new patent lawsuits at the U.S. International Trade Commission as well as in the U.S. District Court in Wisconsin related to LED bulbs that are being imported to the U.S. from Asia.

The patents in suit cover both the LED technology and LED lighting system design. We have also filed a false advertising claim at the ITC related to misleading advertising claims that certain LED bulbs meet ENERGY Star standards but, in fact, do not meet certain basic requirements. .

We have an obligation to our shareholders and our customers to protect our intellectual property rights. We believe this investment in legal costs is critical to drive our licensing program and ensure that consumers are getting the performance from LED lightbulbs that is being advertised and necessary to drive consumer adoption..

As I mentioned earlier, Q3 total company backlog is slightly lower compared to this point last quarter, which is in line with the typical seasonal trend in our fiscal Q3. Our customers and distributors continue to operate on short lead times.

LED factory utilization is targeted to remain at similar low level in Q3, while lighting factory utilization remains very high and execution continues to be a critical factor to meeting customer expectations and our financial targets. .

lighting sales flat to slightly higher as higher indoor LED fixture sales offset seasonally lower outdoor sales; LED sales down single digits due to normal seasonality and the Chinese New Year holiday; and Power and RF in a similar range as Q2..

We target Q3 non-GAAP gross margins in a similar range as Q2 at 33.5%, plus or minus. We target Q3 lighting segment gross margin to be incrementally higher than Q2 due to improved factory productivity and cost reductions, while LED and Power and RF segment margins are targeted to be slightly lower due to factory loading. .

We target non-GAAP operating expenses in a similar range as Q2 as incremental spending to fund our IP strategy offsets savings in other areas. Our tax rate is projected at 17%, and as a result, we target non-GAAP earnings in a range of $0.21 to $0.25 per diluted share.

Please note that our non-GAAP targets exclude amortization of acquired intangibles, stock-based compensation expense, asset retirement charges and the related tax effects..

The market for LED lighting is still in the early stages and largely untapped in terms of installed lighting sockets. We continue to gain share in the commercial lighting market while the Cree LED bulb shapes the consumer lighting category and creates awareness for the Cree brand.

Although the LED market remains challenging, our new SC5-based LED technology has once again redefined what is possible in system performance and cost to enable the next generation of lighting system designs. .

In the near term, we have adjusted our LED factory cost to operate more efficiently at current utilization levels. And we continue to make investments both at Cree and with our manufacturing partners to support the longer-term growth in the business. .

We believe we're on the right track, as evidenced by our significant share repurchases in Q2, and we target additional repurchases in the second half of fiscal 2015. Our game-changing technologies, new product pipeline and brand momentum give us great confidence in achieving our long-term customer goal of 100% upgrade to LED lighting..

We will now take analyst questions. .

[Operator Instructions] Your first question comes from Brian Lee from Goldman Sachs. .

A few quick ones.

First, Chuck, on the factory cost improvement that you mentioned that helped the LED products gross margin in the face of lower utilizations, can you help us understand a little bit more what exactly is going on in terms of those factory cost improvements? And then, is there any way you could quantify the gross margin impact? And then, lastly, how sustainable are those initiatives if you continue to see a relatively depressed utilization backdrop for the LED segment? And then, I had a follow-up.

.

Sure, Brian. So what I would tell you is that within LEDs, keep in mind that in our fiscal Q1, we had an inventory build so we had some more significant inventory reserves, which essentially kind of put our Q1 results into a similar range that we were going to actually see in Q2 at the lower volumes.

And so what we really had to do is -- the cost improvements are really more about cost management. It's about how do you take various costs out of the factory to run at the lower utilization levels and that's a variety of things. There's no one big lever.

What we're targeting in our Q3 is the assumption is that even though LEDs will be down a little bit, gross margins will be similar to down slightly and that's just managing those costs again.

And so the assumption is that if we can get through Q3 and then see some seasonal rebound, we'll start to get some utilization benefits, at least incremental ones, as we head into Q4 on the LED side. .

Okay. That's helpful. And then, my follow-up was just, again, on the LED product segment. I'm not sure if you would agree, but it does seem like there's some structural headwinds emerging in that segment for you guys, not just cyclical. And yet, gross margins have held up relatively well compared to prior troughs.

But when I look at your R&D spending, it's up over 150% over that time period.

So wondering what triggers you might be looking for to rationalize cost there and if you're thinking it's still [indiscernible] relative to the opportunity given the company declines you've seen?.

Yes, Brian, well, keep in mind that the R&D spend that you're looking at is the company R&D spend, so it encompasses what we're doing not only in LEDs, but in our lighting business as well as in our Power and RF business. So we're looking at R&D on a holistic basis and looking at various opportunities.

With that being said, I think, the other subtlety to this is while the LED revenue is down from where it was 6 months ago, keep in mind that we have a very large internal customer, and so that's not being included in the revenue numbers.

And we do want to make investments to support some of the enabling things we're doing in that business longer term.

So we'll continue to look at R&D as a percentage of sales, but right now, we believe that those investments give us significant innovation advantage, which is how we drive fundamentally the growth in the business in the mid to longer term, and we think they make sense. .

Our next question comes from Paul Coster from JPMorgan. .

Chuck, I just wanted to focus on utilization a little bit more if you don't mind. It sounded like you have some kind of capacity constraint as it relates to fixtures. I don't know what to make of bulbs and lamps.

And then, am I right in thinking here that you're not making incremental investment in the LED capacity at this time, and that you just went against all either [ph] current utilization starts to slide [ph]. .

Yes, so let me take those backwards. LED capacity, no, we're not making any new equipment investments on the LED capacity side. We're really trying to balance the current utilization, which is lower with the demand.

And over time, as the business -- as we would target growth to kind of ramp up our utilization as well as bringing on some of our manufacturing partners. Switching gears to lighting and fixtures, I would say that bulbs and lamps are -- we have capacity to support that business.

On the fixture side, that's actually where we've been running fully utilized. And that's a combination of we are qualifying additional subcontractors to add some capacity there as well as doing things in our factory in Racine. But the growth in that business has been really strong.

And we've been challenged here over the last quarter or 2 to really continue to scale up with that demand. I think, we're doing an okay job, but there's more work ahead of us. .

Okay. My follow-up question relates to Lextar. So we're only a short time into this relationship. What is it that you are using them for? And I'm assuming it's mid-power.

If it's mid-power, is that also weighing on the use of your high-power LEDs?.

So our Lextar relationship has started out, and it's primarily focused in the near term on LED chips, which you would consider to be mid-power chips. But that is really the service set of customers that we won't be really using our factory for that anyway. So I think, it has not a significant effect on our factory utilization at this point.

And we have actually done things over the last quarter to balance our assets versus what we use with our partners. So I think, we've got that balanced out.

Longer term, I think, we look at Lextar as not only potentially a chip partner but really across our supply chain, just like we're looking at some other suppliers for various things from LEDs, all the way through the lighting systems business. .

Our next question comes from Vishal Shah from Deutsche Bank. .

Chuck, on the lighting business, I know you've seen some nice improvement in margins.

How should we think about margins longer term? Can you get back to the corporate average levels that you've talked about in the past in that business, especially given -- considering the mix changes?.

Yes, I think that the goal is to make incremental improvement, so I don't have a longer-term target. A little bit of that is a little bit difficult because, really, we have within lighting, you have our commercial lighting business, which we're targeting to make incremental improvements again in our Q3 there.

But at the same time, you've got a mix shift going on. So the consumer side is fundamentally a lower margin business for us. And so that mix shift affects it.

But if you just break that out, I would -- we're targeting that we can make incremental improvement in the commercial side in this quarter and I would think we can make even going forward beyond that.

As far as does it get to the corporate average, I don't have a longer-term projection for you at this point because as long as we make incremental improvement, we'll get the leverage we're looking for in the model in the near to midterm. .

That's helpful. And then, just on the LED business.

Again, if you think about the pricing environment right now, how much more leverage do you have to maintain margins in that business? And where are you with the 6-inch transition?.

Yes, we're mostly on 6-inch, I don't have an exact number for you, but I think, in the pricing environment, maybe what we're missing is that it continues to be very competitive. But one of the things we did, which is different from most of the other LED companies, is our business is smaller than it was 6 months ago.

So we've decided to focus on the applications where we think our technology adds the most value, which means we think we can get the best margins in that part of the business.

And so we are pretty high-power-centric focused in those areas, which I think gives us a slightly different model than what a lot of the other people are doing who are trying to fill their factories with some of the low and mid-power.

So it's hard to tell you what the future holds in that pricing environment, but I think if we keep innovating and doing new things like our SC5 Technology, which gives us double the lumens per package, I think, we have a lot of other innovation that can continue to give us things that allow us to produce lumens at a lower cost per lumen, which then gives us the ability to continue to move with the market over time.

.

Our next question comes from Jed Dorsheimer from Canaccord. .

I've 2. I guess, Chuck, maybe you could -- maybe a little bit of, I guess, medium-term type question with respect to the LED components business. There's been a clear shift from high-power to mid-power and the relative difference seems, let's just call it, if a high-power chip costs or component costs $0.50, a mid-power might cost about $0.15.

So taking 2 mid-powers, the relative difference might be somewhere between 30 and 50 but you need secondary optics in that mid-power type solution, which has been more appealing to some of the consumer-type bulb applications.

So my question, with that said, is do you see a shift over the medium term where the high-power products will be -- that you'll see that come back based on a technology criteria? Or because of yields where they are, between mid and high, do you think that this is the new normal that we will be in sort of in perpetuity?.

Yes. So I think you got to separate it, Jed, a little bit by application. So if we were making linear light tubes, your analysis is obviously dead on. And even some of the more, I'll call it, more large -- what I'd say is kind of non-focused lighting applications where there's no optics or anything else.

But what we're actually seeing with our high-powers and what we're doing with the SC5 platform is we're actually looking at trying to fundamentally shift how the entire cost of the system comes together.

And so if you look at the applications we're targeting, it would be more expensive to build that application with mid-power LEDs than with high-power LEDs because of what you're trying to do. Now these tend to be higher performance.

They tend to be more of the commercial industrial side, and they tend to be higher lumen densities or total lumen output or how the device is being used. So I think, what we really see today is you have high-performance applications where high-power is just fundamentally a better choice, and you have other applications where you can use either one.

And if you could choose either one, then I think what you're seeing is that the pricing environment in mid-power has made that the more attractive option. What we've tried to do is focus our efforts on where we add value. Is there a new normal? I think that in the near to medium term, I think this is the market we're going to have to work through.

That's why we've got to design products that make our customers' products work better, and that's how we can win. If I step back a little bit, if I look at our financial model and the competitors that many of whom are losing money, I think, those markets rationalize.

And so I think the reality is that cost is not -- your numbers you gave are differences in price, and I'm not sure what the comparison there is. The difference in cost and the difference in price are disconnected right now. And I think, those markets eventually rationalize.

But I don't know the timeframe so the way we're planning the business is assuming that we just have to deal with the fact the people are going to give away mid-powers for now and we're going to focus on places we add more value than that. .

That's fair. And just as a follow-up question, just housekeeping.

On the $500 million line of credit, is that being used primarily for buyback purposes or are there other intentions for opening that line of credit?.

I'll let Mike give you that answer. .

Yes. So Jed, in the near term, it's basically to provide flexibility, so we are using some of it for the buyback, but it's also, it could fund some of the infrastructure CapEx where we can maximize the return on the invested cash that we already had and we don't have to sell those investments. .

Think about it more as if we don't have to sell our investments, we sell them on our schedule instead of the schedule of the needs of the business. We're making a little bit of extra money using that line of capital in the short term. .

Our next question comes from Mike Ritzenthaler from Piper Jaffray. .

Just a couple for me. On pricing within lighting products, I was curious about whether it's possible to bifurcate some of the margin lifts that we saw this quarter from less pricing pressure versus cost outs? It sounded like in your prepared remarks, you highlighted the cost outs and some of the raw material efficiencies.

Just wondering if there's less pricing pressure or if we saw less pricing pressure in the fourth quarter within the lighting products?.

first, we have favorable mix shift. So more commercial, less consumer on a percentage basis is going to help our margins; second, within the commercial segment, we did get benefits from the various productivity and cost outs.

I don't have the exact breakout for you, but they were -- roughly, those were the 2 big pieces that moved the number during the quarter. .

Okay. That's fair. And my follow-up is on the -- the lawsuit initiated this quarter comes, I guess, after a period of relative peace in the industry.

And I'd just be curious about your view, I guess, why now and why this potential strategy may not beget a costly back-and-forth?.

Yes, I think that, look, we're always evaluating products that are coming into the market and looking at our options. And I think, at this point, the timing's a function of when certain products are in the market and when our team determines that this is the best course of action.

We got a pretty simple strategy, right? We prefer people not to import infringing products and we'd like to get paid for our IP. And so, I think, we'll continue to evaluate what's the most practical way to solve those problems and we'll see where it leads from here. .

Next question comes from Edwin Mok from Needham & Company. .

So first one, just quickly on the LED component side. I think you talked about 4Q, you expect business to recover.

Is that seasonal? Is that any kind of how to channel inventory right now? Is there any kind of channel you fill-in [ph] you expect by that quarter, any kind of color you can provide either on channel or the demand?.

Yes. So I mean, keep in mind, when we put that out there, we don't have great visibility.

So what we're really looking at those, if the business is shaping up like a normal year in LEDs, and so we would expect some seasonal increase as we get into the -- our fiscal fourth quarter just based on the fact that when you get through -- the March quarter, you get past Chinese New Year, there's usually some incremental growth in the business.

We obviously have lots of activity on new products and trying to drive new designs, but it's a little too early to call on those. I think, they give us more of a mid to longer-term opportunity but that's how we get to that outlook. .

Okay. And then, just quick question on CapEx rate. How much of your CapEx that you're now spending on -- can relate to the lighting side or on fixture and stuff that you have mentioned? And I think, you guys have ramped up CapEx over the last few quarters.

And do you have any kind of access LED or MOCVD equipment that you have not turned on, and therefore, haven't impacted your depreciation yet? Should we expect some of those to come in later on?.

Let me give you kind of the higher-level answer, and I'll let Mike answer your depreciation question. In terms of the CapEx we're spending, really what we have going on right now, the majority of the investment is really for some infrastructure -- buildings to support longer-term growth in the 3-year timeframe.

So the majority is not equipment to build more product in any of our businesses. It's really some infrastructure things that we think are prudent to do now as we plan for that next phase of growth. So I would -- this is not about adding incremental equipment and really in many of our parts [ph].

There obviously are some things we have to do in lighting right now, but those are relatively small dollars, some things in Power and RF and really no new equipment in the LED space because we have available capacity. As far as depreciation or what it could be and the impact on the future, I'll pass that to Mike. .

Yes. So in the short term, as Chuck mentioned, the CapEx is more longer term in nature. So there's some of the capacity that's for Lighting and Power and RF that would turn on in kind of the near term, but the infrastructure in that, that's more like an FY '16 type of event when that would start to be placed in service. .

And our next question comes from Mark Heller from CLSA. .

Chuck, I was wondering if you could talk about what your expected mix will be maybe this quarter and over the next few quarters for the SC5 platform?.

Yes, Mark, SC5 is going to be a very small percentage of the mix in LEDs this quarter. It's -- we got the technology platform launched. We did some early sampling. The XHP, the first 2 products got released in December, so those are now in customers' hands, and we're doing actual design work with them on next-generation.

But that's probably -- 9 months is typically when we get the first read on a new platform. We'll obviously have some initial customers go early, but the majority of what we're targeting in LEDs is our existing product line and frankly, the stuff, the new products we were releasing last summer.

So there was a series of products, if you go back to the summertime, that we were announcing. Those are the ones that are more likely to turn on the new design wins and ramp up here in the next couple of quarters. .

Okay.

And for a quick follow-up for the lighting business for the March quarter, is mix still helping you, meaning, the bulbs business would still be down sequentially or flat? And any expectations for the June quarter for the bulb business?.

Yes. I would say that in the March numbers, that while we're targeting the overall to be flat to up a little bit, we would say that if it's up, it's probably some incremental growth, both on the consumer and the commercial side. There's not a big mix shift into those numbers.

The only mix shift will be actually within the commercial side where we expect that the seasonal slowness in outdoor will be offset by the indoor. But between the 2 -- kind of the consumer, commercial piece, I wouldn't expect a significant percentage changes. .

Our next question comes from Harsh Kumar from Stephens. .

Chuck, first question. I think, some point in time, in your comments, you made a statement that the LED business for Cree, your own, is stabilizing, your business is stabilizing at current levels of revenues. I'm curious about the color.

Could you be able to give us some color around that statement and/or also maybe throw in some color on the markets themselves, on the LED global markets?.

Yes, Harsh, not sure if maybe I didn't make my comments clear earlier. I think, what I'm trying to make sure people understand is, is that while our external business has declined, we have an internal growing lighting business. And so the LED business that we measure, which is what we report, is what we sell externally.

The internal customer year-over-year, as you can see in the lighting numbers, has grown. And so there's really a partial offset internal in our factory to what we have to supply to the internal customer, and that's really what I was talking about earlier. .

I got you. Okay. And then, secondly, there's been a dramatic shift in your buyback mentality.

I'm curious, why now, why here? And what are you seeing in your business -- of course, we're not complaining obviously about this buyback, but what are you seeing that makes you so optimistic about a couple hundred million dollars a quarter in terms of buyback?.

Well, look, I think, if you just look at the things we have going on, right, we have a healthy growing lighting business that continues to have good success in the market.

Our LED business appears to have stabilized at these kind of lower levels, so I think we've got our -- and kind of adapted the business to this level, and we still have Power and RF that has some interesting opportunities more in the midterm.

And based on that assessment, we felt like pretty significant buyback made a lot of sense, given our outlook on the mid to longer-term prospects for the company. .

Our next question comes from Jeff Osborne, Cowen and Company. .

Just 2 questions. I was wondering, Chuck, if you can talk about the shift or mix between indoor and outdoor as it relates to the second quarter that you just completed. You certainly highlighted the trends or your expectations for the third quarter. That was question 1.

And question 2 is just how should we think about the impact to gross margins as the Gen 3 bulb starts hitting the shelves in the second half of your fiscal year relative to the impact or negative impact that the Gen 2 bulb had? Should there be less of a negative drag there or similar trends given the $2 lower price point?.

Yes. So on the mix indoor versus outdoor, I don't think there was a significant shift within the commercial segment last quarter. We saw growth in both sides of that. So I don't know that -- I don't have the exact number sitting in front of me, but you should assume it was relatively neutral within the commercial segment.

Then if I look at Gen 3, although the bulb is priced $2 lower, it is targeted to have a similar margin structure as the Gen 2 bulb. So that shouldn't change our consumer margins significantly one way or another. .

Just a quick follow-up.

Would the Gen 3 bulb use your own chips? Or would you be potentially qualifying third-party chips for that and just trying to impact what the utilization impact would be on the semiconductor side?.

Yes, the Gen 3 bulb can use either. .

[Operator Instructions] And our next question comes from Sven Eenmaa from Stifel. .

I wanted to ask about the Lextar and what are your plans with the Lextar chips in lighting product portfolio?.

Yes. So Lextar is one of several companies that we have qualified to provide chips, what we would typically refer to as mid-power chips that get used in a variety of products, both Cree's lighting products but as well as we use in some of our LED components.

And so they're going to typically end up in areas where, honestly, they're typically more distributed lighting applications. The majority of our products use our own chips today but there is some examples where we would use a mid-power, for example, in a light tube would be an example where we would use that as well. .

Got it. And the second question I have is regarding The Home Depot.

What are -- when are the pricing discussions occurring there? And how should we think about pricing adjustments with that customer?.

With The Home Depot, that is a never-ending conversation, and it's a function of things we're doing working with them and things that are happening in the market. So there's not any one milestone that you can measure it. It's an ongoing process. .

Our next question comes from Avinash Kant from D.A. Davidson & Co. .

Just a quick question, Chuck. If you look at the revenue that you have seen in the LED products business, they have declined significantly since the last year levels.

Now hypothetically, if revenues were to come back to the same level where they were in more than a year ago, do you think you'll be able to get to the same margins that you had at the time?.

Hypothetically, if we had the same level of revenue, if it's for the products we're targeting today, I think, we would see higher utilization and would drive higher margins. But we don't have any targets one way or another at this point. .

So I'll just follow up on the same line.

The thing we're trying to figure out is that the decline in margins, is that directly proportional to the volume decline that you have seen or there's something else, clearly, more pricing there?.

If you look at it, if you're looking at it on a longer-term basis, I'd say probably the biggest change in the LED business from last summer has been the volume decline. There is some impact because it's obviously a very tough pricing environment right now.

So I -- there is -- both are impacting, but I would say the bigger lever, at least in the last 6 months, has been the volumes in our factory. And that's because we're always doing things to reduce cost and that the idea is to try to keep up with the pricing environment.

But when you also have the volume change at the same time, that's what you've seen in the shift. .

Next question comes from Krish Sankar from Bank of America. .

I had 2 quick questions.

Chuck, is there a way you can quantify how much of your output from the LED products goes to the downstream lighting business?.

It's a significant customer, but the majority is still external customer sales. I don't have a specific breakout for you. So it's primarily still an external sales business but the internal customer is a significant piece of it. .

Got it, got it. And then, a follow-up. More of a theoretical question, but I'm just wondering, if it ever comes to it, how easy is it to split the LED component business from the lighting products business for you to split the 2 business or split it into 2 different companies. .

I mean, today, obviously, they both have -- I mean, while we get the benefit of being vertically integrated, we have a team that's dedicated to selling LED components, it's a core part of our mission, and to sell it to other companies.

So I think -- since we haven't -- we're not working on that right now, I don't know that I have all the specifics but -- and they're semi-independent businesses. With that being said, there is an advantage of thinking about things vertically and that you can move both sides of the variables.

And I think that given the nature of where lighting is and the amount of innovation still in front of us, I remain convinced that there's a benefit to having a vertically integrated relationship, at least for the foreseeable future. .

I'm showing no further questions at this time. I would like to hand the conference back over to Mr. Mike McDevitt for closing remarks. .

Thank you for your time today. We appreciate your interest and support and look forward to reporting our third quarter results on April 21. Good night. .

Good night. Thank you. .

Ladies and gentlemen, Thank you for participating in today's conference. This concludes our program. You may all disconnect. Have a wonderful day..