Greetings. Welcome to the Ball Corporation first quarter earnings conference call. During the presentation, participants are in a listen-only mode and afterwards we will conduct a question-and-answer session. [Operator Instructions]. As a reminder, this conference is recorded on Thursday, May 2, 2019.

It's my pleasure to turn the conference over to John Hayes, CEO. Please go ahead, sir.

Great. Thank you Emma and good morning everyone. This is Ball Corporation's conference call regarding the company's first quarter 2019 results. The information provided during this call will contain forward-looking statements. Actual results or outcomes may differ materially from those that may be expressed or implied.

Some factors that could cause the results or outcomes to differ are in the company's latest 10-K and in other company SEC filings as well as company news releases. If you don't already have our first quarter earnings release, it's available on our website at ball.com.

Information regarding the use of non-GAAP financial measures may also be found in the notes section of today's earnings release. The release also includes a table summarizing business consolidation and other activities as well as a reconciliation of comparable operating earnings and diluted earnings per share calculations.

Joining me on the call today are Scott Morrison, Senior Vice President and CFO and Dan Fisher, Senior Vice President and COO of Global Beverage. I will provide some introductory remarks. Dan will discuss the global beverage packaging performance. Scott will discuss key financial metrics.

And then we will finish up with comments on our aerosol and aerospace businesses as well as our outlook for the company.

Overall, we were pleased but not satisfied with our quarterly results, with overall global beverage can demand up over 8%, which is the highest it's been in a very long time and our aerospace business continues to deliver on its growth ambitions.

Offsetting this growth was the previously mentioned conclusion of the end sales agreement as part of the Rexam acquisition in South America and some short-term incremental costs that weighed on results in North America.

Dan will address these transitory costs related to efficiency headwinds for two of our new lines in our Goodyear, Arizona facility and the impact of aluminum scrap costs in his comments later. We expect volume growth to continue while our costs become more in line as we move through the year.

Now key highlights for the quarter include, as mentioned previously, overall global beverage can growth of approximately 8% with specialty can growth of approximately 20% and standard cans flat, further highlighting that our focus on specialty cans is paying off.

In fact, specialty cans now represent over 43% of our mix on a global basis, which is up from 30% in 2016. The growth was across the board with North and Central America up approximately 6% year-over-year, South America up a bit more than that and Europe and EMEA up in the low to upper teens, respectively.

Our customer discussions about shifting products into cans from glass, plastic and multilayer paper-based containers have only accelerated and Dan will go into more detail about what we see going forward. In addition, we received the antitrust approval of the sale of our China beverage can business and we are on track for second half 2019 closing.

Aerospace revenues were up over 20% and while we don't expect this level of growth to continue, we do expect revenues to be up over 15% for the full year. Finally, aluminum aerosol was up low to mid single digits as the sustainability discussions migrate to this segment as well.

Now speaking of sustainability, Ball has focused on a variety of efforts over the past number of months to raise awareness on sustainability, educate consumers on the benefits of aluminum packaging, aid customer shift to cans and proactively improve our own environmental footprint.

Key initiatives that we have focused on year-to-date include engaging with customers, governments, NGOs and others on the sustainability advantages of aluminum packaging, including presenting at the World Ocean Summit in Abu Dhabi, supporting employee-led recycling and community cleanup events around the world and launched new events in Argentina and the Persian Gulf, just to name a few, launching a campaign to educate youth about recycling, if you can, choose a can, facilitating various sports and cultural venues to shift to aluminum packaging, including utilizing Ball's reclosable aluminum bottles for still water, developing new infinitely recyclable brandable aluminum cups for use in stadiums, venues, colleges and other channels where plastic cups are used and to make Ball and our products even more sustainable, announcing agreements to transition 100% of our North American energy usage to renewable sources by the end of 2021, making Ball one of the largest corporate buyers of renewable energy in the U.S.

As we go forward, we see the momentum growing in each of our businesses throughout this year.

We will continue to execute our long-term strategy of growing EVA dollars and earnings over time through increasing revenues above our cost growth, by focusing on our value over volume strategy, driving more mix shift to specialty containers, further developing innovative aluminum packaging products and expanding aerospace, all with the return of value to our shareholders' mindset.

And with that, I will turn it over to Dan..

Thanks John. And as John has already highlighted, we had some pluses and minuses to start the year. On the plus side and without a doubt, sustainability is having a favorable impact on customer demand and given customer conversations, it will in the future as well.

On the minus side, certain inflationary costs to respond to the surge in volume growth cannot be fully offset in the U.S. given the aluminum scrap market spreads and a couple of new lines not quite hitting our targets. Turning to growth.

Our first quarter global beverage can volumes were up 8%, though comparable operating earnings were down 6.5% year-over-year due to the $33 million impact of the previously disclosed completion of the South America end manufacturing agreement, which will anniversary in mid-2019 and the late year 2018 U.S.

line inefficiencies continuing in the first quarter. We can and we will do better going forward. Across the globe, our teams kept pace with tremendous growth in Europe, Brazil and North America, which in some regions created some operational and logistical inefficiencies given the tight U.S. industry and higher than anticipated growth in Brazil.

The impact of widening aluminum scrap spreads in the U.S. has highlighted an area of exposure in certain customer contracts, which will be or has already been addressed for agreements renewing in 2020. Moving to the individual segments. Ball's North America segment volumes were up 6% in the quarter.

New categories led the way with wine, spiked seltzers, energy, crafts and water experiencing double digit growth and lower calorie light beer being stronger than year-over-year.

Given the strong growth, we experienced higher than anticipated line conversions in our new Goodyear, Arizona facility which, in a start-up environment, created higher cost than anticipated.

This combined with the aluminum scrap issues described earlier, dampened our results and while headwinds related to scrap will continue until we can fully pass these on, we expect our operating performance to improve as the year goes on. Turning to our South American segment.

Volumes were up 11% in the first quarter, led by incredible strength in Brazil.

As mentioned earlier, the completion of the end's manufacturing contract, required as part of the Rexam transaction, led to lower first quarter earnings and higher than anticipated Brazilian volume growth, led to pockets of suboptimal logistics patterns to honor customer demand.

Comps will improve as we move forward with second quarter segment earnings down just slightly to reflect the mid-year anniversary of the end's agreement completion. Our expansion in Paraguay is on track for late 2019 start-up and the 2018 expansions of Argentina and Chile are contributing to results.

Overall, the South American industry trends remained strong with cans being the favorite package in the beer, tea, energy and hard alcohol categories. Looking forward, we see additional customer conversions from returnable glass to cans, aiding growth in 2020 and beyond.

European beverage earnings were up nearly 7% in the first quarter on difficult year-over-year comps, given the timing and location of the 2018 World Cup, a $5 million unfavorable operating earnings translation impact and start-up costs associated with two new lines and multiple specialty line conversions in the quarter.

Volumes increased 10% in the first quarter, continuing the momentum from 2018. Cans are winning as customers shift their package mix into cans. As a result of new can filling lines being installed across our customer's operations, we look forward to continued good market growth.

For 2019, contributions from our new lines, the year-over-year impact of our 2018 G&A improvement and plant cost initiatives will provide further year-over-year earnings growth and margin expansion as we progress through 2019. Turning to EMEA and Asia.

The demand environments in Turkey and India improved and operating performance in our Saudi joint venture stabilized. And in China, Ball has secured antitrust approval for the Chinese manufacturing plant sale to ORG. In summary, global beverage can demand remains robust in our three key regions of North and Central America, Brazil and Europe.

Supply/demand globally for cans is tight and commercial and sustainability initiatives will benefit Ball going forward. Thank you again to all of our teams around the globe. With that, I will turn it over to Scott..

Thanks Dan. Comparable first quarter 2019 diluted earnings per share were $0.49 versus $0.50 in the first quarter of 2018. First quarter 2019 results reflect $0.03 dilutive impact of the July 2018 sale of our U.S. steel food and steel aerosol business.

Details are provided in the notes section of today's earnings release and additional information will also be provided in our 10-Q. First quarter comparable diluted earnings per share reflects strong global can volumes and solid aerospace contract growth, a lower effective tax rate than expected offset by the sale of the U.S.

steel food and aerosol business and lower year-over-year end sales performance in South America and U.S. cost inflation, as Dan just outlined. Net debt ended the quarter at $6.5 billion and reflects our typical seasonal working capital build and ongoing share buyback.

We continue to anticipate year-end 2019 net debt to remain around $6 billion as we continue to actively buyback stock and pay dividends throughout 2019. Close to 90% of Ball's balance sheet debt is at fixed rates and we have reached our post-Rexam target levels. We have an additional $850 million of stock to buyback by the end of 2019.

And in 2019, we will pay roughly $185 million in annual dividends, which reflects last week's dividend increase.

Looking forward, the company remains committed to repurchasing the shares issued to execute the Brazilian JV and Rexam acquisitions and we will closely monitor growth trends and growth CapEx returns to determine how much additional growth CapEx will be spent beyond 2019.

Ball's balance sheet is healthy and our recent amend and extend of our credit agreement provides ample opportunity and flexibility to service growth and shareholder value return needs.

As we think about 2019, we continue to strive for full year comparable EBITDA of $2 billion, free cash flow in excess of $1 billion after CapEx in the range of $600 million, full year interest expense a little north of $300 million, with full year effective tax rate on comparable earnings will be in the range of 22% and corporate undistributed should be just under $100 million, which is roughly flat with 2018.

By investing in our businesses, pursuing bolt-on M&A, repurchasing stock and paying quarterly dividends, we continue to put the cash machine to work for the long term benefit of our fellow shareholders. With that, I will turn it back to you, John..

Great. Thanks Scott. In our aluminum aerosol business, now reflected in other non-reportable results and as I mentioned earlier, global volumes grew 4% in the quarter. We continue to see opportunities to broaden our global footprint.

Sustainability is also a driver in this business as some consumer product companies pursue aluminum alternatives to plastic. We are proud of the progress our team is making on innovation, operational improvements and employee engagement to further improve this high-returning business.

Our aerospace business, as I mentioned earlier, reported 24% revenue growth and 20% operating earnings growth on solid contract performance, partially offset by incremental labor costs and the start-up of many of these new contracts.

In addition, we welcomed 300 new aerospace employees in the quarter and we anticipate adding another 600 employees over the next 12 months. Our total aerospace headcount recently surpassed 4,000 people.

Our focus remains on onboarding these new employees, readying the facilities for further expansion and most importantly, executing on our strong backlog.

Now as we look forward for the company, we are one quarter of the way through the year and while we still have much to do to achieve our 2019 financial goals originally laid out in mid-2016, our longer term prospects continue to be bright.

Ball is uniquely positioned to lead sustainable growth in global aluminum packaging and aerospace while also continuing to return significant capital to shareholders, following the Board's announcement to raise the quarterly cash dividend by 50% last week as well as our recent $50 million share repurchase authorization.

We still expect to acquire $1 billion of stock in 2019 and we look forward to exceeding our long term 10% to 15% diluted earnings per share growth goal. All of this is possible because of our people and our culture. We will continue to do what's best for Ball and our shareholders' long term success. And with that, Emma, we are ready for questions..

[Operator Instructions]. Our first question comes from the line of Anthony Pettinari with Citi. Please proceed..

Good morning..

Good morning Anthony..

John, you got a couple of quarters where it seems like you have had some growing pains in terms of meeting a stepped up pace of demand and I am wondering just from a big picture perspective if we are moving to a world where bev can vols are maybe closer to mid single digit growth and low single digit.

How confident are you that, not only Ball but really the entire supply chain, whether it's the aluminum producers or your freight providers, are going to be able to kind of meet that higher level of demand?.

Yes. It's a good question. Two things. First as it relates to Ball, recall, the acceleration of this growth has happened really right as we were in the midst of optimizing our footprint. So we had a number of plants that we were taking down over the last year or so in a number of lines.

In fact, 11 lines, I believe, across the world over the last 18 months or so. And so any time you have this growth much higher than you are anticipating, when you are going through change, it adds risk to it. That's a little bit of what's happened. We are largely out of it as we look forward.

We probably will have a little bit more in the second quarter. But as we move to second half of this year, we really expect to see all the benefits that we said.

On a broader basis, from a supply chain perspective, you raised an excellent point because I am confident in our ability to make the cans, but what we are increasingly focused on is on the filling side of our business, making sure there's enough filling capacity to fill the cans and more importantly on the metal side, making sure there's sufficient metal globally but even regionally, particularly here in North America.

The tariffs that were implemented about nine months ago haven't helped the situation. And we have gone from a situation where we had four or five metal suppliers that we relied on increasingly, we have doubled or tripled that, if not quadrupled that, given the shortage of aluminum, rolled aluminum here in North America.

So that's added complexity into the whole system. And we have been working very diligently with all of our key suppliers to make sure that they have sufficient capacity to realize that the growth is endurable, it's sustainable and it's here right now..

Okay. That's very helpful. And then is it possible to size the earnings drag from the scrap spread issue that we could see in 2Q or maybe the remainder of 2019? And then I think Dan indicated the issue will be addressed or has been addressed in customer contracts.

Is it possible to say how far along you are in that? And you have some contracts that are three to five years.

Is it something that's going to take multiple years? Or just any thoughts on that one?.

Yes. Anthony, this is Scott. On the drag on the first quarter, the scrap issue was probably about $10 million in the U.S. and it's really only a U.S. issue. That will continue in the second quarter, but it gets better in the second half as some of our supply gets switched to different suppliers and becomes a little more competitive.

And I will let Dan talk about the customer side..

Yes. Anthony, I would say on the customer side, I would say about 25% to a third of our North America business has this exposure in 2019. Two-thirds of that has already been contracted. The other are basically annual contracts that get renewed at the beginning of 2020.

So it's within our control to re-up those contracts with a very different pass-through mechanism..

Okay. That's very helpful. I will turn it over..

Thank you sir. Continuing on, our next question comes from the line of Edlain Rodriguez with UBS. Please proceed..

Okay. Thank you. Good morning guys. A quick one on sustainability.

As you look ahead over the next couple of years and if we believe you, as the can gains market share, like how do you take advantage of that, given that you practically sold out? Are you contemplating capacity expansion projects in all the regions? Like how do you take advantage of the higher growth?.

Yes. Well, we actually have seen this coming for the last 18 months. We have been talking about it for a couple of years and we truly believe the acceleration of it is actually going faster than we had thought. But recall, as I mentioned a couple of minutes ago, we have invested meaningfully in our business to prepare for it.

And so as we sit here in the short term, we are very confident that we have the capacity. What we are more focused on is actually the whole supply chain, as I said earlier, the filling side as well as the metal side.

I think longer term, meaning beyond 2020 going into 2021 to 2023, we see a variety of opportunities, but we are only going to be investing in that capital if we can get the appropriate returns. So maybe I will let Dan talk a little bit about the granularity there..

Yes. And I think, just to piggyback on that and maybe it's a more nuanced view, John has talked multiple times even at the Investor Day about needing to move our customers in PET that need to move, they also need to make sure that they get profit pools reestablished.

And so when you look at our specialty growth just on the first quarter year-over-year, that's where a lot of that movement is happening. And we were up 20% in the globe on our specialty volume growth.

Remember, over the last two years in the footprint reestablishment, we have taken out 12-ounce capacity and we have added back in specialty in anticipation of selling this through to our customers and it's starting to come to fruition. Now it's happening, candidly at a faster rate than we anticipated.

And to John's point, we are constantly looking at our footprint for investment opportunities with customers and the returns have to be there in order for us to step into those..

And just to give you one last context.

As part of our planning process, Dan and his team has really looked out not only two, three years but looked out 10 years and really looked into every one of our facilities and said where are those areas of low-hanging fruit, if you like to call it, we can speed up lines? What are those facilities that we can add lines into the existing bricks-and-mortar? And then where are those areas that we need to look outside? So we have a very good idea of short term and long term incremental capital and big capital, where we could invest if we get the appropriate returns..

Okay. And one quick one on Brazil.

Like are you gaining market share at the expense of glass? Because it seems like there is some dispute between what you say and what the biggest glass competitor is saying over there?.

Yes. The answer is yes, from returnable glass. And what is happening in that market is, that market is transitioning to premiumization. There's been a couple of new market entrants over the last couple of years that have moved to pure malt, that have upgraded their ingredients profile and they have exclusively gone into cans.

So the predominant player in that marketplace that overwhelmingly has a majority of returnable glass share, is having to change their ingredient profile on their beer composition and they are having to address from a competitive response standpoint, they are having to move to cans.

And that is going to be an appreciable movement over the next three to five years. And so in the comments, when we said demand was ahead of what we thought, it's all playing into the response from the incumbent there and moving more into cans..

Yes. One other data point just on the first quarter and this is Nielsen data, but overall beer consumption increased a little over 1% in Brazil while can demand increased 20%-plus. That's just on the beer side. On the soft drinks side, consumption declined a couple of percentage points and can demand actually increased 1%.

So that, by definition, means the can is taking share from other packaging substrates..

Okay. Thank you..

Thank you. Our next question comes from the line of Ghansham Panjabi with Baird..

Hi. Good morning. This is Matt Krueger, on for Ghansham.

How are you?.

Good.

How are you, Matt?.

Good. So first, I was just hoping that we could take a drag around the globe and just take a look at what your budgeted volume growth outlook looks like by region for 2019? And if there's any notable factors that we should consider as we move just in terms of the quarterly cadence of layering in that growth..

South America, based on the comments I made on the last question as it relates to beer and the premiumization and the shift to cans in the Brazilian market. And then in Europe, it was really an energy movement and continued shift, I think, in sustainability and all that. I don't have a lot of data points to suggest that.

But the growth rate certainly was ahead of what we anticipated. As long as weather holds in the northern part of Europe, we feel like we are poised for some decent growth ahead of that 4% or mid single digit growth..

Yes. Matt, your question is also, I think, is a more important one longer term because I think the megatrends around sustainability. This is not just a 2019 event. I say that because we have had more conversations with existing customers who are talking about converting from other substrates into cans.

But more importantly, we have had the most number of conversations with new customers that have never been in cans that want to convert. And whether it's the spiked seltzers, whether it's some of the categories Dan mentioned or even still water, which we are seeing very strong interest in as this whole sustainability issue rises to the top.

And so I think this is a multiyear, if not decade, type of conversion that will play out..

Great.

And then understanding that you are entering this higher growth phase in the business, can you talk about what your targeted operating leverage is across these new sales volumes that you are seeing? And then how do you think you are performing currently with all the start-up costs, et cetera, versus your ultimate kind of operating leverage goal on that new business?.

Yes. Well, I think in North America, as we said, I think we can do better. I would think we should be at historical levels, if not a little better, if we can extract kind of the commercial benefits that you should see with the supply/demand market that's as tight as we have.

The challenge, fundamentally in North America, just to take a step back and walk through what we have done in the last two years, we have closed multiple facilities and we have started up seven new lines here in the last 18 months and that's not an insignificant challenge.

You throw on top of the fact that what John just indicated, where we probably moved from a half dozen metal supply programs into roughly 20, that's coming from all parts of the world.

So I think managing that, focusing more on the supply chain, getting that stabilized and as you said, moving into this kind of growth paradigm, not only with our supply base but our internal employees and our processes, I think we should be performing at historical leverage fall-through..

Okay. Great. Thank you very much..

Thank you. Continuing on, we now have a question from the line of Tyler Langton with JPMorgan. Please go ahead..

Good morning. Thanks for taking my question. Just on, I guess, Europe and South America.

I mean if the growth is kind of mid single digit plus this year, with your current capacity, can you support that for the full year? Or would you need to either speed up lines? And sort of would you expect, if you had to do that, I mean are there any sort of cost headwinds associated with that?.

No. Great question. We fundamentally have gotten through it from a capacity standpoint because keep in mind, we are just leaving peak season. So as we head into the fourth quarter next year, that will really be kind of pre-build, et cetera. And so we will be fine for the next six to seven months.

I am actually heading down there in the next two weeks to go through a pretty extensive footprint analysis on that very question. But as John already indicated, if we are not going to get the returns, we are not going to add capacity.

But yes, we will certainly, heading into next year, if we see growth rates at this particular juncture, we are going to have to look at incremental speedups, et cetera, potentially on the backs of this movement or the substrate mix that continues to kind of candidly surprises us a little to the upside..

Yes. Don't forget also that, Dan's comments were directed largely towards Brazil, but don't forget that we invested in a new line in Argentina as well as Chile last year. And we will, in Paraguay, are having a new facility start-up late this year. So that's actually helping us to bridge some of that gap..

Okay. No, that's helpful. And then just with Goodyear. I know sort of like two of the lines are taking a little bit longer to ramp up.

Can you, I guess, give a rough estimate of how much that's costing you in sort of executions for the balance of the year? And then does that, I know it was always the goal was to get $50 million of benefits from Goodyear this year.

I mean is that something you can still achieve for the year? Or with these pressures, does it get pushed out a little bit?.

Yes. I think the cost drag in the first quarter is $5 million and that should decline as we move through the second quarter and hopefully will run in well as we get to the back half of the year. Full year, the $50 million, we are a little bit behind in where we wanted to be.

But we have every intention and every expectation that we will be able to realize the net benefit when we get up and running. And remember, the two lines were overcomplicated by having to switch sizes on those large two. So that's difficult when you are starting out and you have got a new workforce.

So as we smooth out that production capability, I think all of that gets better and gets to our original expectations..

Great. Thanks so much..

Thank you sir. Continuing on, our next question comes from the line of George Staphos with Merrill Lynch. Please go ahead, sir..

Hi everyone. Good morning. Thanks for all the details..

Good morning..

Good morning Dan. So I guess the first thing I wanted to do is come back to the comment and it's been touched on a few of the other questions and answers, on I think, Scott, you said monitoring CapEx relative to returns. So I think in some ways that's self-evident what you are seeing.

But can you talk about how that might play into the other cap allocation goals that you have for the next couple of years, including the buyback that you have talked about? And when would we see from you that you have enough visibility, one way or another, in terms of monitoring that CapEx and what it means for 2020 and 2021?.

Yes. I don't see that our CapEx needs are going to change our return of capital to shareholders. We had a nice bump in earnings this year. We are going to get a nice bump in earnings next year. Our leverage is down at three times by the end of the year. So we could definitely spend more capital and still buy $1 billion of stock.

I am not overly concerned about that. We have the good fortune, George, you have been around a long time, where we have been able to invest in our business, do M&A and return a lot of value to shareholders. And I think now we just have a bigger cash engine to be able to do that with.

So we are not and in terms of incremental capital, Dan talked about his trip to Brazil. We have got another meeting here in the next week to talk about all that, to John's comments about incremental capacity, where we could speed up lines. So it's too early to tell where that might be and what that might result in.

But rest assured, we will be putting capital in the ground where we are going to get sufficient returns. And I think it's going to add to that earnings machine that allows us to continue to buy back and return a lot of value to shareholders..

Yes. And let's not forget, George, also just our goals for 2019 is $1 billion of free cash flow and that includes $600 million of CapEx. And that $600 million, our maintenance, state-of-the-art maintenance CapEx is probably in the range of $350 million. So embedded in even the $1 billion of free cash flows is $250 million of growth.

And so if you just extrapolate that out with a growing cash flow from the earnings, you can see it may be plus or minus a little bit, but it's not a big mover..

Okay. Thank you. That's very clear. The second question I had and again, it's been touched on a little bit in some of the other Q&A, very helpful. On the one hand, we hear from the other substrates about how they are finding they need to educate the consumer. And this has been of our premise.

It's kind of a battle for the hearts and minds of the consumer here that's important in terms of plastics versus paper versus glass versus aluminum.

If you buy the premise of this, how do you maintain aluminum's advantage when everyone else is now ramping up their "education process"? What makes you comfortable that you don't lose what's been an advantage to-date? And relatedly, Anthony touched on this in his question, how do you maintain the security on the supply chain? And specifically, what are the aluminum companies telling you right now about their willingness to invest in more can sheet capacity when the last few years they have talked a lot about auto and other things that they claim to make more money on but obviously are a little bit more cyclical?.

Yes. George, let me take the first part and then I will turn it over to Dan on the aluminum supplier side. Let's remember this, to the consumer this is not about cans versus glass versus plastic versus paper. This is about sustainability and doing right for the world.

The aluminum beverage can, far and away, is the most sustainable, from a recycling point of view, both in terms of its ability to be recycled and the economics about recycling. The consumer gets that.

So unless something fundamentally changes there and we keep our ears to the ground and eyes to the ground quite often on this, unless fundamentally something changes there, I think the aluminum can is always going to win out and I believe the consumer is seeing that.

Now as it relates to the aluminum supply and aluminum suppliers, Dan, why don't you take that?.

Yes. George, good question. As you can imagine, we are having a number of conversations with our supply base. And I think the comment that you introduced in there is something that they are very well aware of. Maybe they weren't aware over the last two to three years. But the movement in the automotive, it's massively cyclical. There is a slowdown afoot.

And I think there is a growing desire to find another diversification outlet to put capital to work. Some have, it's a more difficult discussion than others because they are so wed, to save time, publicly with some of the automotive statements. But it's clear that there are a number of folks that are absolutely willing.

And keep in mind the return thresholds on that in a tighter supply/demand market. We are having very different conversations with them, longer term conversations. And I think they are seeing a very different tone and tenor out of us. They see the upside of the sustainability message.

And I think folks are going to be willing to put some capital to work..

My last question and I will turn it over.

When we look at some of the incremental costs that you have incurred this quarter and expecting until the second quarter because of the growth in the can, thank you for parsing the details on the aluminum credit and the like, is there any embedded cost that is non-variable and for which you could not get out of easily? In other words, have you needed to hire more people? Is there more fixed costs that you have built into the beverage can business because of the growth outlook that doesn't necessarily step down quickly 3Q and 4Q? Thank you very much.

Good luck in the quarter..

Yes. George, the short answer to that is no. There's nothing structurally that has changed related to that. As you rightly pointed out, these have been just short term growing pains..

All right. Thank you very much..

Thank you. And our next question comes from the line of Neel Kumar with Morgan Stanley. Please go ahead, sir..

Hi. Good morning..

Good morning..

In terms of your customer conversations, has there been any changes in terms of the customer order patterns this year versus last year, where it seems some money was left on the table because the industry was placing more adjustment time inventory orders?.

Yes. There's definitely been. And I think there's a couple of beer companies and alcohol companies that have substantially outperformed expectations. They have changed their buying pattern in North America. We have had a number of really good conversations.

You can even see it on the balance sheet, we are carrying kind of record levels of inventory right now in anticipation of peak season. So we are in a much better position.

Now whether or not we have placed the right bets with our customers on which products they are going to sell through from Memorial Day through Labor Day, well, that's kind of always the gamble, right, in terms of peak season in North America. But I think we are in a lot better position heading into peak season than we were on previous years..

That's helpful. And then related to the beer market. We saw a pretty strong pickup in alcohol can shipments in North America the past couple of quarters.

Has there been any improvement in the underlying beer market that you have seen? Or has that really just been driven by substrate switching?.

Not a lot of improvement in the beer market. There was one of our customers that probably did a little bit better branding and pass-through and had some easier comps year-over-year. And they have also changed their, you can see it in their advertising, they have changed to multiple can sizes in specialty and sleek formats.

So I think that's all helping. But what we are seeing is and we have talked about it probably for the last couple of years, the big beer houses, they have woken up to the fact that they need to sell what the end consumer wants. And they have done a really nice job of pushing out new innovative products, alcohol related.

But whether it's the seltzers or different kombuchas or different types of spiked cocktails or mocktails, all of those are continuing to win in the marketplace. And I see more innovation, not less innovation, as John indicated, more into cans. And so we are excited about all of that going forward..

Great. Thanks..

Thank you sir. Continuing on, our next question comes from the line of Scott Gaffner with Barclays. Please go ahead, sir..

Thanks and good morning..

Good morning..

Good morning..

Dan, as we look at the volume growth in North America first quarter and sort of fourth quarter of last year, obviously accelerated.

Because it is coming, a lot of it, from new product launches, how much of that is really based on underlying end market demand versus your customers filling the channels based on these new product offerings? Just trying to get an understanding of the sustainability of the growth at that particular level..

Yes. I think it's definitely selling through. Good question. It's not channel stuffing. And the other thing and I think John indicated with this is, as it relates to sustainability, a couple of years ago, new product launches in North America, the can would take roughly 30% to 35% of the share of all new products from a package mix standpoint.

It's now moved closer to 70%. And so it's not just the new products. It's that the new products are overwhelmingly going into cans. They are selling through. Now some will sell through and some won't, right? And we will have to deal with that added complexity.

But the reality is, it's like where we see the most appreciable sign of the sustainability movement. It's not necessarily a shift from existing products that have been regulated out. It's all the new products that are coming out. They are innovative. They are new. They work well with various can portfolios and different applications from that standpoint.

And that's where we are benefiting from. But right now, it's overwhelmingly the spiked seltzers and things that have gained a lot of traction last summer. It has distribution space and it's selling through. I would continue to see that through the summer..

Okay. And then when you look at the manufacturing footprint, I mean, going back to one of the previous questions on operating leverage on new volume. I mean, clearly or not clearly, but maybe you can just tell us, I mean, Goodyear, I would assume, is one of your largest if not the largest facility that you have.

Is there opportunity on a go-forward basis, as you continue to invest capital in some of these regions to have more centralized production such that you could maybe leverage some of the volume growth a little bit better than you have historically?.

There is definitely an opportunity to do that. It's all going to be about, it all relates to what is the product and what's the end market price point of that product and how much freight can that product absorb. So if it's $3 a unit on a shelf and it's an energy drink, they can absorb a heck of a lot more than a $0.99 still water product.

And so that comes into the equation on that. But leveraging fixed cost, multiple lines, multiple conversions, leveraging your staff, leveraging your overhead structure and candidly leveraging your supply chain and your inventory levels, all of those things will become more and more embedded in how we think about expansion moving forward..

North America, Europe and South America, our network of footprint is by far larger than anyone else. And so we have the ability to look at incremental speed-ups in those 20 or so facilities in North America versus a new line and where to put that. So you have network effects of all those things.

It gives us more options and more levers to pull as we are thinking about where to make product and where to ship product..

Thanks for the color. Just lastly, John, I think in your prepared remarks you mentioned lack of filling capacity or filling capacity coming online slower than maybe demand for cans is coming up from the consumer. Intra-quarter, there was an announcement about you co-investing with one of your customers around filling capacity.

I mean, should we start to see that more and more co-investing on filling capacity so that you could ramp up your customer's capacity at the same rate that the end the market is ramping? Thanks..

Yes. Well, a couple of thoughts. Number one is what you are specifically referring to, recall that Ball is not really putting any real capital in. What we are doing is creating enablement. Enablement for our customer to be filling and enablement for us to actually have the cans to be filled.

And so I would expect that, much like we talked about the whole supply chain, I would expect that you should think that we are thinking about the whole supply chain on the filling side and on the metal side as well. Whether or not the investment, we make investments into that is all about our core businesses making and selling and marketing cans.

So it's an enabler and can, on a standalone basis, generate good economic returns, we would certainly consider that..

Perfect. Thank you..

Thank you..

Thank you sir. Continuing on, our next question comes from the line of Brian Maguire with Goldman Sachs. Please go ahead, sir..

Hi. Good morning. This is actually Connor Robbins, sitting in for Brian Maguire. I just wanted to back to the 2019 reiterated guidance there. Obviously you mentioned some of the headwinds with Goodyear as well as some of the aluminum scrap stuff and then maybe tracking a little bit less than that $50 million benefit that you expected from Goodyear.

Just wondering if there was any other offsets that you guys expect in maybe another segment to bridge to that?.

Yes. For the full year, I think aerospace continue to do extremely well and probably has upside from what we originally thought. I think the European market is doing really well. We are getting hurt a little bit from a currency standpoint as it translates back into dollars in Europe, but I think that will do well.

We are seeing very strong demand we saw in South America. And EMEA and Asia are doing okay. So I think across the board, our businesses are probably in better shape now, absent the softness that we had in North and Central America.

But all the other businesses, including aerosol, are probably better across the board than where we were coming into the year..

Yes. And I will just make one final comment on it. Obviously, we put out our 2019 goals way back in 2016. We are not running the company only for 2019. We are running it for 2022, 2024, 2030. This is a long term sustainability play.

While we wish some of these short term headwinds related to the aluminum as well as the Goodyear start-up, we wish they had not hit us. They did and it's reality. But we are focusing on maximizing the opportunity both short and long term for our stockholders..

Okay. Great. That's very helpful. And then just one other on some of the specialty can growth. It seems like you guys mentioned there's some pretty strong growth there. But you did mention in the press release, mix metal costs to serve some of the double digit specialty can growth in that North and Central America segment.

Just wondering if this is more related to operational items? Or is there maybe not enough capacity that you guys have that's outpacing some of the demand expectations you have? Or just kind of a little more color there..

No, the two lines in Goodyear have multiple can sizes on them. And yes, we are not running as we anticipated and that certainly contributed to some challenges in terms of needing to get those cans from other locations, out-of-pattern footprint, running more over time in locations.

So a collective drag by not having those two specialty can lines running where we thought they would entering the year..

Okay. Great. Thanks for the details. I will turn it over..

Thank you. And now we have a question from the line of Arun Viswanathan with RBC Capital Markets. Please go ahead..

Great. Thanks. Good morning. I guess I just wanted to get your thoughts on where we are in the sustainability adoption period. I guess it appears that growth has been a little bit quicker than expected.

I guess what are your expectations for volume growth across different regions, I guess, going forward? Do you see that moderating? And has there been, say, a pull-forward on the sustainability front? Thanks..

Well, I think we covered this a couple of times earlier on this call. We think we are in the early stages of a long term secular change because of sustainability. And I do think that as we look forward over the next period of time, then we can debate whether it's three years, seven years, 10 years.

You are going to see a lot more of the sustainability debate in front of us.

And it's our job to try and capture with the most sustainable package in the world, capture as much of the incremental growth from new products Dan was talking about as well as conversions, whether on still water or other things that have a very, very low exposure to cans currently. There's a huge long term opportunity for us in every region..

Yes. So it's fair to assume that, I guess, global bev can growth should kind of remain in the 3% to 4% range for a little while.

Is that fair?.

No. I think we have said over the past year, we think over the long term, without sustainability, depending on region, it's anywhere from 2% to 4% growth. So what we are saying is, at a minimum, that's just the upper end of that growth and it could be a little bit more depending on how things break..

Okay. Great. And then just a quick question on capacity. I guess this aluminum can sheet has been tight for a while and it looks like it will be again just given this growth and I guess same with can capacity as well in North America.

Where do you guys come out on investments there? Do you think more investments on the can sheet side will be coming? And similarly on the can side itself, how do you kind of view supply/demand right now or the supply in North America? Thanks..

Well, I mean, supply from a rolling metal standpoint, we are importing metal right now. So yes, there needs to be capacity increases. There's plenty of metal capacity, but managing boats and different supply chain levers all around the world is not the most efficient and the most agile way to do that.

So we are in a number of conversations to help our metal supply base, figure this out along with us. We will continue to invest in this. We have seen it for a couple of years. The reason, again, that we are up 20% in specialty growth is we have made significant investments over the last 36 months on specialty line investments.

So we are able to step in at some of these opportunities. As John has indicated and as Scott's reiterated and I am telling you again, we are looking at EVA-accretive opportunities and investments and there are a number of conversations going on with the customers right now. We will continue those.

We are not going to put any money in the ground unless we get an appropriate level of return..

Understood. Thanks..

Thank you. And continuing on, our next question comes from the line of Mark Wilde with Bank of Montreal. Please proceed..

Hi. John, I wondered, first of all, if you could just put a little more color on exactly how that three-way joint venture in Arizona is working? I think I heard you say you weren't actually putting any capital into that business..

Yes. Let me tell you what I can in a public forum. There's been a great relationship between this customer, their filling partner and us as a can partner. And so we have entered into a filling operation.

And you know any time you make a manufacturing facility, the best way to optimize the economics is think about the throughput and maximize the throughput of that. I think there's going to be third-party filling capability in this as the customer ramps up and that third-party filling capability.

We know those customers that need to fill cans that may not be the customer that's investing and they are allowing us and the joint venture to pursue those. So we are in charge of the third-party filling of the demand from that filling location..

Okay. That's fair.

And when I think about just Red Bull and juices, which I think are kind of the two products that have been announced, is it fair to say that that plant is probably going to be running a very high proportion of specialty cans?.

Yes..

Although exclusively..

Okay. And then when we were out in Boulder in early November, I think you made a real point of talking about how the can manufacturers need to help replace the kind of the profitability that a beverage company might have in other packaging formats like PET bottles right now, which are very profitable for the soft drink companies.

Where are you in that process, you think, of convincing them that these alternative formats that you have got can replace those profit pools so that they end up being made whole?.

Well, I think the greatest proof point we can talk about is the 20% global growth in specialty and the flat standard 12-ounce volumes. And so your question is really better answered by our customers that are actually putting it on the retail shelf.

But we have given them, there's a reason why we make over 40 different sizes and it's giving our customers variety so they can look at whether the package is right in a 7.5-ounce container, a 10-ounce container, a 12-ounce, a 14-ounce, a 16-ounce and everything in between. And so we are going to continue to do that.

And that's going to mean, as Dan has mentioned earlier, that's going to mean more complexity. And we need to get paid for that complexity. But if it's helping the customers improve the profit pool of aluminum as the consumer is demanding more aluminum, good things typically should happen..

Okay. And last thing along this line. It just seems like the craft beer market has moved pretty rapidly into cans and it seems like they have held their pricing. So I am just curious, do you think this is having an effect, let's say, on these Mexican beer companies that are still shipping to the U.S.

predominantly in glass that they look at what's going on with craft? Craft has gone into cans and its held premium pricing such that maybe we will see more of the Mexican beer moving into cans?.

Yes. I think the one particular customer that you are probably talking about, we have a really strong relationship with them. Keep in mind, there's a ton of, there's an iconic image associated with that particular bottle. And I think there's some real, they believe there's some real market value associated with that.

That being said, almost all of their new products that they are introducing are all in cans. And so it may not move appreciably the one core product that's in glass, but everything else that they are launching from an innovation standpoint is coming in cans. And we are in constant contact with them on an innovation standpoint. So your point is valid.

I just think some of these iconic shapes are very difficult for a marketing organization to move from appreciably..

Yes. Understood. I know what that image is..

Yes. We are drinking more of those. I am sure it's the same when the weather warms up here..

Yes. All right..

Thank you, Mr. Wilde, for your question. Continuing on, we now have a question from the line of Debbie Jones with Deutsche Bank. Please proceed. Ms. Jones, it appears your line is muted. Please proceed. Your line is open..

Hi. Thank you. Good morning. I wanted to switch gears a bit and ask about aerosol, a couple things on that. You mentioned kind of a low to mid single digit growth. I am assuming that's in line with kind of industry trends. We haven't talked about it a lot in a while here. So I wanted to get an update on that.

And then what do you think the opportunities are from the sustainability perspective in terms of categories where you could see growth from that? And then lastly, just as this fits into your portfolio, is it something where you would expect it to become a bigger part of Ball over the next two or three years.

Or the opportunities in beverage cans are really dominating the capital allocation from an EVA approach?.

Yes. Let me try and tackle those quickly. Number one, yes, it's in line with, overall, the industry growth that we are seeing as best as we can tell. Number two, I do think the whole category that aluminum aerosol plays in is probably further behind the sustainability journey than the beverage world. And I say that for a couple of reasons.

There still is a tremendous amount of plastic in the personal care markets. That plastic is even more difficult to recycle because it's often different resins and multiple resins.

And so I do think that the opportunity for the aluminum aerosol category to grow relative to the other substrates, is even perhaps greater in that but it hasn't caught on yet as much as beverage. And last but not least, it's difficult to answer your question about will it become a bigger part of our company or not.

From a pure organic point of view, if this was a couple of years ago, I would have said yes, probably. But when you have 8% global beverage can growth, we look at it as a bottoms-up issue, not a top-down issue. So we don't target things to get bigger or smaller.

I would have said aluminum aerosol has relative growth profile that was better than beverage cans. But if I had said that several years ago, I would have been proven wrong..

Okay. Then the next one is -- go ahead..

And Debbie, building on John's comment there, you go into a grocery store within North America, you have two aisles that are beverages. You have got 15 aisles of cosmetics. They are all in plastic. We have a number of conversations with retailers on it. They see the issue. They see it coming and they need help.

And so I think there will be more and more opportunities in spaces that are tangential, that we can bend metal and we can handle different apertures, et cetera, that we can step into. Those are, to John's point, it's not moving as fast as the beverage side of things, but stay tuned..

Okay. Thanks. That's helpful. And I guess I wanted to ask about the comment you made about the aluminum cup. I guess that it's pretty early stages, but you did mention it on this conference call.

So I was wondering if there's any encouraging signs that you are seeing? And also just to get a sense of what type of capital is involved with something like this..

Aluminum cup..

The aluminum cup.

Dan, do you want to take that?.

Yes. We are making really good progress from a development standpoint. We have made investments from a pilot standpoint, Debbie. We will be launching it into a -- we will be commercializing it this fall on some college campuses and some entertainment venues. Moving forward, there is a ton of conversations and commercial appetite for it.

We have hired a dedicated general manager for that business and we are building a team in and around that. It's full speed ahead. It's similar in terms of the economics to a can line, maybe a bit more and almost very similar to the output of a can line just in terms of the economics. This is very early stages. We haven't solidified that.

But in the engineering, drawings and things that I am seeing to really step up the capital investment, the good news is we will have an opportunity to leverage some of our existing infrastructure and overhead structure to pilot that. I will let John fill in more on some of the other things that are happening on that..

Yes. Strategically, we are very excited because on its own merit, there's a huge opportunity. But there's also a lot of leverage because many of those venues, whether it's college campuses or sports stadiums or museums or other things, as they talk about trying to go plastic-free, cups are a big part of it and beverage containers are a big part of it.

And they don't want to just do one or the other. They want to go plastic-free. This provides us a portfolio where they can completely dedicate their beverages to going plastic-free and that's what's exciting about this..

Okay. Thanks for the update. I will turn it over..

Thank you. And now we have a question from the line of Adam Josephson with KeyBanc Capital Markets. Please go ahead..

Thanks everyone. Good morning. Just one more on sustainability, Dan or John.

Do you know what the recycled content of the aluminum you are buying is? And consequently, what the recycled content of the cans you are selling is? I have seen some data on Can Central and the like, but I am just wondering if your suppliers actually give you that information..

Yes. It's not the right way to be looking it, to be quite honest because aluminum is fungible. So you can take an aluminum can, melt it down and it can go into a bicycle frame or it can go into a window frame. And so I do know that, to answer your question directly, well over 50%. It depends upon the supplier. But well over 50% is recycled content.

But I would strongly encourage everyone not to be thinking of that because 100% of aluminum is recyclable and can go into a wide variety of products. And that's why there's such a great benefits, recycling benefits of aluminum..

Thanks. And John, I think you said on the last call, your customer negotiations for next year were nearly complete.

Could you give us an update on the status of those negotiations? And consequently, what type of commercial benefit you are expecting next year and beyond, if possible?.

Yes. There really is no update relative to what we said 90 days ago. And I said we are still in the documentation. So when we have something to tell you that's more than what we have, we will tell you..

Thanks for that. And Scott, I think you mentioned earlier, you are expecting earnings to be up nicely this year as well as next year. Can you just give us a little more context for that comment? Is that just based on volume expectations or otherwise. Just I think you talked about next year as well and I just wanted to flesh that out a little bit..

Yes. I think we will be able to fix the issue that we are having around scrap in next year, with the contracts that we are entering into. I think we will get out beyond the learning curve of some of these start-up lines and plants that we are experiencing this year.

I think we will see more volume and more growth across the business and weighted more towards specialty. And some of those new commercial contracts kick in next year. So I think all of those things lead to improved results, nicely improved results as we get into 2020 and 2021 and 2022.

And so we are in a pretty good spot and we are pretty excited about the future..

Thanks Scott..

Emma, this is John. If there is one more question, we will take that, but we are over our allotted time..

Thank you so much, sir. We actually do have one final question. This comes from line of Chip Dillon with Vertical Research Partners. Please go ahead, sir..

Hi John and Scott. Good afternoon now for us. Thanks again for all these great details. No one, I don't think, unless I missed it, asked about aerospace. And you talked about such a huge potential backlog. And it looks like this year, a reasonable place to be, last year, you did $1.2 billion in revenues, maybe this year is over $1.3 billion.

What kind of years could we see in 2020, 2021, when you talk about especially that shadow of $4.9 billion? I know it's lumpy and it gets spread out.

But can you give us some parameters around that?.

Yes. Thanks, Chip. You are a good wingman for us because aerospace is very, it's an exciting time. And you know that's a long-cycle business. And what I mean by that is the visibility is much further out because of the won not booked and because of the contracted backlog.

What I would tell you is the growth profile we see this year, we see continuing for the next couple of years at a minimum. And that's kind of over the next three to four years. So you should expect kind of a 15%, 20% growth and with comparable margins as we go forward on it. So it's really exciting.

We continue to bid on things at a rate faster than we ever have before. We continue to grow the people and the facility side at a rate faster than we have ever done before because we see the opportunity set as we moved from components and sensors to full satellite, become a full mission partner for our customers. Those trends are only continuing.

So as far out as we can see, these trends will continue..

And will the mix, either in terms of type of customer and I know mostly that's U.S.

government, will that change? And will the character of the contracts be materially different, that is the mix of fixed price versus cost plus?.

No, I don't think so. I don't think so. You always have nuances. But from a strategic point of view, they should not..

Okay. All right. Thanks for the help..

Okay. Thank you..

Thank you sir. And Mr. Hayes, I will turn it back to you to continue your presentation or for your concluding remarks. Thank you, sir..

Great. Thank you Emma. Thank you for everyone participating. We look forward to accelerating our momentum as we move to the second half of this year and we appreciate your continued interest..

Thank you so much. Ladies and gentlemen, that does conclude the conference call for today. We thank you all for your participation and ask that you please disconnect your lines. Thank you. Have a great day..