Melanie Sprowson - Director, Investor Relations John Stanik - Chief Executive Officer Dee Ann Johnson - Vice President, Finance, Chief Accounting Officer..

Albert Sebastian - Prospect Advisors.

Good morning. My name is Nicole, and I will be your conference operator today. At this time, I would like to welcome everyone to the 3Q Earnings Conference Call. All lines have been placed on mute to prevent any background noise. After the speaker’s remarks, there will be a question-and-answer session. [Operator Instructions]. Thank you.

Melanie Sprowson, you may begin your conference..

Thank you, Nicole and good morning to everyone joining us on today’s third quarter conference call. I’m joined by John Stanik, our Chief Executive Officer and Dee Ann Johnson, Vice President of Finance and Chief Accounting Officer. Due to a family emergency, Mike McAuley, our Chief Financial Officer will not be joining us today.

Before we begin, I’d like to remind everyone that participants on this call may make statements or comments that are forward-looking and may include financial projections or other statements of the Corporation’s plans, objectives, expectations or intentions.

These matters involve certain risks and uncertainties, many of which are outside of the Corporation’s control.

The Corporation’s actual results may differ significantly from those projected or suggested in any forward-looking statement due to a variety of factors, including those discussed in the Corporation’s most recently filed Form 10-K and subsequent filings with the Securities and Exchange Commission.

We do not undertake any obligation to update or otherwise release publicly any revision to our forward-looking statements. A replay of this call will be posted on our website later today and remain available for two weeks following the conclusion of the call.

To access the earnings release or the webcast replay, please consult the Investors section of our website at ampcopgh.com. Now let me turn this call over to Dee Ann, who will provide an overview of the company’s financial performance for the third quarter..

Thank you, Melanie, and good morning, everyone.

Before I begin my review of our third quarter results, I’d like to remind our listeners today that the comparison of our results for the quarter and year-to-date versus the prior year in both our press release and on this call will be largely affected by our acquisition of Åkers AB and certain of its affiliated companies, which we completed on March 3, 2016.

In addition, while our press release this morning provides commentary on both the quarter and year-to-date, I will focus my comments primarily on Q3 results. Sales for the Corporation for the third quarter of 2016 were $82.9 million. This compares to sales for the third quarter of 2015 of $58.1 million.

Total sales for the current quarter for the Forged and Cast Engineered Products segment were up 74% compared to Q3 2015, driven primarily by the inclusion of the acquired Åkers business segment. Sales for the Air and Liquid Processing segment for the third quarter of 2016 were down slightly from the prior year.

I will comment more on the segment results in a moment. Gross profit as a percentage of net sales was 18.8% for the third quarter of 2016 versus 16.2% for the third quarter of 2015.

The increase is due to a number of factors including actions to reduce employee benefit costs such as pensions and OPEB, lower headcount and favorable product mix versus the prior year.

Selling and administrative expenses were $15 million for the third quarter of 2016 in comparison to $8.7 million for the third quarter of 2015, an increase of $6.3 million.

Included in the current quarter are selling administrative costs for the acquired Åkers businesses of approximately $5 million and restructuring charges of approximately $1.3 million. Depreciation and amortization expense of $5.5 million for the third quarter of 2016 is up versus the prior year, primarily due to the inclusion of Åkers.

Operating loss for the third quarter of 2016 was $4.9 million, compared to a loss of $2.4 million in the third quarter of 2015.

The current quarter operating loss reflects the addition of Åkers and generally weaker market conditions in our cash flow businesses, as well as the restructuring costs recorded through reductions in force in those businesses.

Compared to the third quarter of 2015, net other expense for the third quarter of 2016 included higher interest expense of approximately $700,000 related primarily to the acquisition of Åkers and a foreign exchange loss of $400,000 this quarter versus a modest foreign exchange gained last year.

The Corporation’s income tax provision for the third quarter of 2016 reflects a valuation allowance recorded against the net deferred tax assets of our U.S. operations of $22.6 million, inclusive of the acquired Åkers businesses. At September 30, 2016, the Corporation triggered a three-year cumulative loss positioned for our U.S.

operations and in accordance with U.S. GAAP accounting rules, caused us to be unable to rely on forward projections to support the realizability of the related deferred tax assets. This is a non-cash accounting charge and we have not lost the opportunity to actually realize the cash tax benefits in the future.

But the accounting guidance causes us to record the valuation in our accounting records because of the substantial negative evidence of our cumulative loss history.

You may recall we recorded a smaller valuation allowance for certain of our four entities last quarter of approximately $1.4 million, so the year-to-date valuation allowance of $24 million -- totaled $24 million and are recorded in the income tax provision on our income statement.

As a result, the Corporation incurred a net loss of $23.1 million, or a $1.88 per common share for the third quarter of 2016, which includes the impact of the unfavorable tax valuation allowance of a $1.84 per share. By comparison, the Corporation’s net loss for the third quarter of 2015 was $1.5 million or $0.14 per share.

Now looking at our operating segments. Sales for the Forged and Cast Engineered Products segment for the three months ended September 30, 2016 were up 74% compared to the prior year level, driven predominantly by the inclusion of the acquired Åkers businesses, which added sales of $33.7 million for the current year quarter.

This was partly offset by a decline in the volume of legacy roll business shipments, as well as a decline in other forged engineered product shipments for the fracking industry The segment recorded an operating loss for the quarter, which was higher than the operating loss in the prior year, driven by the inclusion of Åkers, the previously mentioned restructuring charges, and lower legacy European cast roll volumes.

The segment has been experiencing reduced demand for cast roll products and low capacity utilization. John will comment more on plans to address this in a moment. Sales for the Air and Liquid Processing segment for the three months ended September 30, 2016 were about 9% below the prior year quarter.

The change is driven primarily by lower heat exchanger coil shipments to the coal-fired power generation market. Operating income for this segment declined slightly, primarily related from lower volumes.

Backlog at September 30, 2016, approximated $260 million, an 82% increase from the $143 million in backlog at September 30, 2015, primarily driven by the acquisition of Åkers. Backlog increased approximately 4% sequentially compared to June 30, 2016, principally due to higher order intake for rolls and custom air handlers.

With respect to the balance sheet, accounts receivable increased approximately $24 million at September 30, 2016 from December 31, 2015.

The increase represents the inclusion of accounts receivables for the acquired Åkers Group of about $31 million as of September 30, 2016, offset by improved collections and to a lesser extent by the effects of foreign exchange translation. Inventories also increased approximately $24 million at September 30, 2016 from year-end 2015.

Net inventory of the acquired Åkers Group at September 30, 2016 is a primary driver of this change. Accounts payable at September 30, 2016 increased approximately $20 million from the balance as of December 31, 2015, again primarily reflecting the balance of payables of the acquired Åkers Group.

Cash and cash equivalents of $43.5 million at September 30, 2016 declined $51.6 million compared to the balance of $95.1 million at December 31, 2015.

Some selected significant cash flows year-to-date include the cash portion of the Åkers acquisition purchase price, which was approximately $29 million, payment of dividends of approximately $4.1 million, payment of asbestos-related liabilities, net of insurance recoveries of about $3.3 million and capital expenditures year-to-date of approximately $7 million.

Capital expenditures for the third quarter of 2016 were approximately $4.5 million. I will now turn the call over to John.

John?.

Thank you, Dee Ann. Good morning and welcome to our call. The third quarter was a very busy one for the company. We continue to make numerous moves to aggressively position the company to optimize performance and integrate Åkers under current market conditions and we have made significant progress.

During this discussion, I will provide added color to the third quarter financial performance, update you on numerous third quarter activities, include some general commentary on our 2016 strategic plan update and talk a bit about a pending acquisition and how important it is to our future. I will end with a preview of the fourth quarter.

There were three major sources of unfavorability in the company’s performance for the third quarter. One, low cast roll shipments in Europe and the U.S., which is the largest impact by far. Two, plant maintenance turnarounds for all of our roll plants, which occurred in July and August, and three, continued low margin contracts.

I have reported low cast roll sales for each of the first three quarters of 2016. Remember there were two primary roll types, forged rolls and cast rolls. It is our belief that we have not lost significant share. Therefore, we believe this decrease in volume constitutes a negative step change in the roll market size in 2016.

Currently, we have four cast roll manufacturing plants in the world, one’s in China that is operating near capacity and is profitable and three totaled in the U.S. and Europe. These last three have been operating at low utilization rates all year.

Judging by the cast roll commitments we’ve received thus far for 2017 shipments, we cannot continue to operate three plants. Therefore, we have decided to idle our Avonmore, Pennsylvania plant beginning in January of 2017. Idling a plant requires a process of planning and communication.

This process began with evaluations early in Q3 and will continue into the fourth quarter. The idling term is indefinite, but it appears it will last well into 2017 unless cast roll demand increases prior to that time.

This move will result in the remaining two cast roll plants in Europe and the United States operating at higher utilization rates, thereby covering their costs effectively and increasing corporate profitability. We regret the need to take this action.

However, our customers in North America and Europe continued to operate at less than desirable capacities themselves, including some customer plant closures. Concerning poor margin contracts, we’ve made progress.

To refresh your memory, there were three primary customers of Åkers with fixed pricing with negative margins, two through 2016 and one through 2017. For the first two, we have negotiated volume commitments for 2017 at profitable prices.

And in mid-November, we will have an important meeting to discuss pricing for that last remaining customer whose prices were fixed through the end of 2017. Regarding our July 1st price increase and other margin improvement from optimization of plant sourcing, it appears we are gaining traction.

We will continue to monitor progress monthly and continue to push. At this time of the year though, we are competing for 2017 business. Therefore, no price increases or margin increases are expected to hit 2016 results unfortunately, as Q4 2016 revenue will come almost exclusively from backlog. Okay. Item two, the plant maintenance turnarounds.

Annual maintenance shutdowns last between one and two weeks for this business and normally occur in July and August at all of our roll plants. Since the acquisition, we now have seven plants. During this maintenance time, there is no production and there is significant maintenance expense.

Customer shipments are made from inventory, so the net result is a negative financial impact for maintenance expense and the lack of cost absorption due to the absence of production. We are looking at ways to spread these efforts and the associated expenses over a broader time period in future. Those were the issues that impacted Q3 results.

Now, I'll talk about other developments from Q3. The integration of the Åkers roll business continues. In fact, certain programs of that integration process were accelerated in Q3, which resulted in a $900,000 hit to expenses.

To date through the first seven months of ownership, we have captured approximately $5.5 million of synergies with a net $3.5 million of this total hitting 2016 P&L. Frac block orders began to pick up in Q3. This is good news.

We suspect that some of this is for customer inventory replenishment, but with North American drilling sites being added consistently over the past several weeks and with some oil and natural gas price recovery, we expect an ongoing level of frac block business being available but at levels much lower than the peak levels of 2014.

At this point, I’m going to ask Dee Ann to expand her explanation of the cumulative deferred tax adjustment that was included in our third quarter results. Please note though that this is expected to be a temporary situation and also note Dee Ann’s description of what will transpire when we return to profitability in the timeframe that she refers to.

Dee Ann?.

Thanks, John. First, I want to make sure everyone understands that this is a non-cash accounting charge and it does not impact actual cash taxes moving forward. We have not lost the benefit of these net operating losses or deferred tax assets. But given our three year cumulative loss position, the three years ended September 30, 2016.

Under the accounting rules, our ability to consider other objective evidence such as future earnings forecasts becomes limited because of the substantial negative evidence of losses we’ve incurred from a historical perspective. So, we are required to reserve against our deferred tax assets in the form of a valuation allowance.

Unfortunately, these are the rules. If and when the company returns to a sustained level of profitability, sufficient to conclude that it is more likely than not that the deferred tax assets are realizable, the valuation allowance will be reversed. Thanks, John..

the November meeting with our last poor margin contract holder, finalization and initiation of the Avonmore idling plant and the two-year deep dive into our future, asbestos liability. We are hopeful that the recent fracking market pickup continues. However, the likelihood of our profitable quarter in the fourth quarter is low.

We will now take your questions..

[Operator Instructions] Your first question comes from line of Albert Sebastian from Prospect Advisors. Your line is open..

Good morning..

Good morning..

John, can you just give us your thoughts on if the company’s benefited at all from the imposition of anti-dumping, countervailing duties against imported steel into the country?.

I think it is but it’s just beginning. In the months of August and September, and now October with October being the strongest month, we are beginning to see more customer commitments. Prices are still fragile in the U.S.

Prices for us and volume of the business is still fragile in the U.S., primarily because the economy just isn't creating enough demand for steel. In Europe that situation seems to be getting a little better and remember European tariffs lagged U.S. tariffs by roughly three months.

China continues to raise prices, which I think for the world and for the market is a very good thing and I’m talking about steel prices not roll prices. So, I think and I mentioned this, a couple of quarters ago when the tariffs began that this would require a trickle-down effect to hit us. I think we are starting to see it.

And in fact, I can clearly say that in the past significant period of time, the bookings that we had in October are the highest we’ve seen. And some of those are cast rolls. So, I think the tariffs are helping.

I think that the Chinese price increases that are occurring in China are helping and hopefully, we will continue to see some more volume increases. But I am concerned about the U.S..

Okay. Couple other questions.

Cash flow from operations, what was that for the quarter and also CapEx in the quarter?.

CapEx in the quarter was approximately $4.5 million. Working capital, cash flows from operations, we expect to have negative cash flows from operations due to the loss and changes in working capital..

Yes. One comment about the capital expenditure, we are very close to finishing the $9 million heat treat facility in our Harmon Creek, Pennsylvania facility. This was one of the other very strategic needs that we had for the open die forged business.

So that project is being started up currently and will be closed within the next month or two and will have another fairly significant capital hit in Q4 that was projected and expected..

Okay. Good. Thank you. And one last question. In terms of the dividend, you reduced the dividend earlier in the year when you made the Åkers acquisition.

Are you comfortable with the dividend at these levels?.

Well, I think that our strategic plan makes us believe that the future is very promising and is not going to create an urgent situation that would require us to change the dividend.

I continue to think and I continue to recommend to our Board of Directors that the shareholders deserve at least some type of return, considering how poor the company’s performance has been over the last few years. So, I’m fighting to keep the dividend.

We are still -- obviously, as we are announcing another acquisition, we are still able to meet the strategic needs of the company. So, I think while I can't speak for the Board of Directors, my position is that we should maintain the dividend going into the future..

Thank you very much..

Let me make another statement before we take another question. The roll business and the acquisition of Åkers was a very important strategic item for us. And I’m not going to go over all the reasons that we made the acquisition but clearly, it has positioned us to be very, very strong in the industry.

And we are making so many changes to the company through the integration process that I’m convinced will be positive for the company in the near future. But there were two things that were missing when we elected in last year’s strategic plan to pursue expanding our penetration into the open die forging market.

One was heat treats and I just talked about that a few seconds ago and the other was our inability to have the broad spectrum of metals that are needed by the potential customers in those numerous market verticals that I referred to in my prepared comments. The heat treat facility is, as I said nearly complete, complete for all intensive purposes.

This acquisition -- this is a very experienced company. It has all of the physical assets in terms of ladle metallurgy that will allow us to make all of the specialty types of metals that we will need to be a player in this business. It’s going to take a little bit of time for us to get our products qualified.

But with our success in the fracking industry, we already have somewhat of a reputation in the oil industry. And then ASW, of course has a reputation in some of these other markets.

So, we have now by this announcement which hopefully, we will make in the next 24 hours or 48 hours, this third piece of the three piece puzzle now completes where we need to be in our strategic plan to diversify the company and that’s a very positive accomplishment for us..

[Operator Instructions] There are no further questions at this time..

Okay. We do have a closing comment. I’ve said in the past that we are not waiting for industry recovery to occur before this company becomes profitable and that maybe getting a little tired to hear for our shareholders.

But I assure you we’ve worked endlessly to restructure Ampco-Pittsburgh to expand its focus to new markets, as I just described to improve our market strength in the roll industry which I believe is complete and to provide for future growth. I’m very pleased and proud of what the company has accomplished. There’ve been many hurdles.

However, we are clearly making progress. And very soon this will be a company with a strong, profitable performance and a great future. Thank you and have a good day..

This concludes today’s conference. You may now disconnect..