Good day, and welcome to the Steel Dynamics Fourth Quarter 2018 Earnings Conference Call. At this time, all participants are in a listen-only mode. After management’s remarks, we will conduct a question-and-answer session and instructions will follow at that time.

Please be advised, this call is being recorded today, January 22, 2019, and your participation implies consent to our recording this call. If you do not agree to these terms, please disconnect. At this time, I would like to turn the conference over to Tricia Meyers, Investor Relations Manager. Please go ahead..

Thank you, Karen. Good morning, everyone, and welcome to Steel Dynamics’ fourth quarter and full year 2018 earnings conference call. As a reminder, today’s call is being recorded and will be available on the Company’s website for replay later today.

Leading today’s call are Mark Millett, President and Chief Executive Officer of Steel Dynamics; and Theresa Wagler, Executive Vice President and Chief Financial Officer.

We also have our leaders from the Company’s operating platforms, including our Metals Recycling Operations, Russ Rinn, Executive Vice President; our Steel Fabrication Operations, Chris Graham, Senior Vice President, Downstream Manufacturing Group; and our Steel Operations, Glenn Pushis, Senior Vice President, Long Products Steel Group; and Barry Schneider, Senior Vice President, Flat Roll Steel Group.

Some of today’s statements which speak only as of this date, may be forward-looking and predictive, typically preceded by believe, expect, anticipate or words of similar meaning. They are intended to be protected by the Private Securities Litigation Reform Act of 1995 should actual results turn out differently.

Such statements involve risks and uncertainties relating to our steel, metals recycling and fabrication businesses, as well as the general business and economic conditions.

Examples of these are described in our annually filed SEC Form 10-K under the heading Forward-Looking Statements and Risk Factors, found on the Internet at www.sec.gov and is applicable on any later SEC Form 10-Q.

You will also find any reference to non-GAAP financial measures reconciled to the most directly comparable GAAP measures in the press release issued this morning entitled Steel Dynamics reports fourth quarter and record annual 2018 results. And now, I’m pleased to turn the call over to Mark..

Thank you, Tricia. Good morning and happy 2019. Welcome to our fourth quarter and full year 2018 earnings call, and we certainly appreciate and value your time with us this morning. Hopefully, you see the Steel Dynamics team delivered another tremendous performance in 2018.

Our strategic growth and market positioning during the last five years was integral to our current performance. Thank you to the entire SDI team for your passion and dedication to excellence in everything that you do.

And congratulations to becoming a member of the Fortune Most Admired Company, you moved up to first in the metal sector, and that is an admirable place to be. So thank you for that. And thank you to our loyal customers, vendors and shareholders.

On many measures, 2018 was a record year; record operating metrics, record profitability and record cash generation, to name just a few. We have many exciting plans for the coming years as well, but before I explain more, I ask Theresa to provide insights regarding our recent performance..

Thank you. Good morning, everyone. I add my congratulations and sincere appreciation to the entire SDI team. It was an outstanding year and numerous milestones were achieved. Record revenues of $11.8 billion derived from higher realized pricing across all three of our operating platforms and record steel and fabrication volume.

Record earnings, including operating income of $1.7 billion and net income of $1.3 billion. Record cash generation, including cash from operations of $1.4 billion and adjusted EBITDA of $2.1 billion.

In recognition and appreciation for this tremendous performance, we have awarded a well-deserved $1,500 cash performance bonus to all non-executive, eligible colleagues in December totaling $12 million.

Our fourth quarter 2018 net income was $270 million or $1.17 per diluted share, which includes three items; the additional company-wide performance incentive of $0.04, lower earnings related to our planned outage at Iron Dynamics of $0.04 and lower estimated earnings associated with the planned outages at our Butler and Columbus Flat Roll Steel divisions at $0.06 per diluted share or $20 million.

The outages also reduced fourth quarter volumes by about 70,000 to 80,000 tons of flat-rolled steel. Excluding these items, fourth quarter 2018 adjusted net income was $0.31 per diluted share, above our adjusted guidance.

Fourth quarter 2018 revenues were $2.9 billion, meaningfully higher than fourth quarter 2017 sales but slightly lower than our record high achieved in the third quarter sequential results.

Our fourth quarter operating income was $366 million, more than 85% higher than fourth quarter earnings but 30% lower than record third quarter sequential results, driven by lower flat-rolled realized sell-in value.

As a reminder, the fourth quarter is generally more difficult to translate as weather, seasonality and customer inventory realignment tend to distort true underlying demand dynamics for the coming months.

2018 was not – was no different, but of note, our performance in the fourth quarter far outpaced that of 2017 and our best fourth quarter operating performance. As we discuss our businesses this morning, you’ll find we are optimistic about 2019 from a macro perspective and even more so because of our unique earnings catalyst.

Regarding our steel results for the fourth quarter, shipments decreased 6% across the platform to 2.6 million tons as compared to record high sequential results. Steel metal spreads compressed as our average quarterly realized sales price decreased $48 per ton in the fourth quarter and average scrap costs consumed only decreased $9 per ton.

The sales price decline was driven by lower flat-rolled steel pricing. In general, most of our long product steel prices actually increased in the fourth quarter. The result was fourth quarter steel operating income of $402 million. Although lower than third quarter record results, the strong performance is our third best.

For the full year 2018, steel operations achieved numerous milestones resulting in record shipments of 10.6 million tons and record operating income of $1.9 billion. Annual metal spread improved as our average sales prices increased significantly across the platform and scrap costs increased to a much lesser degree.

While the teams achieved record volumes, we still have more capability in light of our acquisition of Heartland and the numerous production enhancements we made during the year, including cost-effectively accessing the excess melting capacity at our Roanoke constructional steel division.

For our metals recycling platform, fourth quarter operating income was $17 million, aligned with third quarter results. Improved average quarterly mill spreads were offset by seasonally lower shipments.

Supported by improved domestic steel mill utilization, the metals recycling team increased annual 2018 shipments and earnings and continued to improve operating costs. This resulted in improved annual operating income of $88 million.

We continue to effectively lever the strength of our vertically connected operating model, which benefits from the steel mills and the scrap operations. Two-thirds of their ferrous scrap was fed internally to our own steel mills, increasing their scrap quality, melt efficiency and reducing company-wide working capital requirement.

Fourth quarter 2018 operating income for our fabrication business improved sequentially to $15 million. Earnings increased as improved product pricing more than offset the diminishing rise in average steel input costs and seasonally lower shipments.

Order activity was strong throughout 2018, and the team achieved record annual joist and deck shipments of 642,000 tons. However, in a rising steel input cost environment, annual operating income was $62 million versus the $87 million achieved in the prior year. We continue to see strong order and strong customer optimism.

We’re beginning 2019 with an even greater project backlog than this time last year, which is a positive indicator for nonresidential construction.

During the fourth quarter of 2018, we generated a strong $491 million of cash flow from operations, and for the full year, a record $1.4 billion with free cash flow after fixed asset investment of $1.2 billion. Operational working capital grew $284 million during the year based on market improved conditions.

Full year capital investments totaled $239 million with almost $190 million used within our steel platforms, including completing the reinforcing bar expansion. We currently estimate 2019 fixed asset capital investments to be in the range of $350 million.

However, this does not include any expenditures for the new mill, which I’ll talk about in a minute.

Of that $350 million, there’ll be about $100 million related to the completion of Columbus’ third galvanizing line, $100 million broader expansionary and efficiency growth projects and about $150 million related to sustaining capital, including that related to safety and environmental.

Regarding shareholder distributions in 2018, we increased our cash dividend in the first quarter by 21% and maintained that throughout the year. We also repurchased 13.1 million shares of our common stock for $524 million, representing 5.5% of our outstanding shares. About $400 million remains authorized at the end of the year for repurchase.

Our liquidity increased to over $2.2 billion at December 31, representing nearly $1.1 billion in cash and short-term investments and $1.2 billion of available funding into our revolving credit facility.

Before I hand the call back to Mark, I will share some additional insights regarding the anticipated cash investment time line for our recently announced new Southwestern U.S. flat-rolled steel mill, which is a key part of our growth strategy.

The total investment is still expected to be between $1.7 billion and $1.8 billion, subject to revisions as we make final site selection, obtain required permitting and finalize the project time line.

Based on what we know at this point and assuming timely receipt of required environmental and operating permits, we would expect to begin actual facility construction in 2020, followed by starting operations in the second half of 2021.

Based on this time line, we estimate the approximate capital investments to be as follows; in 2019, between $200 million and $300 million; in 2020, between $800 million and $900 million, with the remainder being spent in 2021. We’ll continue to refine these estimates as we make our final site selection and secure state and local incentive.

The strength of our through-cycle cash generation, coupled with a strong capital foundation, provides meaningful opportunity for growth and continued shareholder distribution through our positive dividend profile and share repurchase program. We’re squarely positioned for continuation of sustainable, optimized, long-term value creation.

Mark?.

Super. Thank you, Theresa. While safety is and always will be our number one priority, 2018 safety performance did not meet the record incident rate performance we achieved in 2017, somewhat disappointing. But the team has refocused and done a good job reversing the uptick in recordable incidents we experienced in the first half of the year.

I’m also encouraged by our continued improvement in our lost time accident rate, which is the best we’ve ever achieved. Nothing surpasses the importance of creating and maintaining a safe work environment.

While safety performance remains significantly better than industry averages and the fact that they think about safety at all times, but then is a subconscious. I challenge all of us to be focused and to keep moving toward our goal of zero injuries. To that end, I want to recognize the steel fabrication platform.

They not only had record annual production in 2018, but they did it safely, achieving a record 2018 safety performance. The team also did a good job maneuvering within a rising steel input cost environment present through a large part of the year. Our fabrication order backlog remains very, very strong with continued optimism from our customers.

This bodes well for non-residential construction demand in 2019. The fabrication platform also supported our steel mills and pushed 370,000 tons of steel internally in 2018. This is a meaningful level to achieve, sustainably high steel utilization through the cycle. In total, our business has sourced almost 985,000 tons of steel internally last year.

Our metals recycling team also performed well and supported our steel operations, internally supplying over 3.3 million tons of ferrous material through the year. Annual ferrous scrap shipments and average pricing increased as domestic steel production improved during the year.

Our non-ferrous commercial associates should be commended for navigating a complicated set of circumstances given China’s ban on certain recycled material. Despite the issues, we increased non-ferrous shipments, improved earnings and generated new international supply connections.

More recently, ferrous scrap accessibility has been steady and dealers have built their inventories. We anticipate supply will outpace demand even with higher steel-related demand through 2019. This is consistent with our long-term scrap view and supports healthy steel metal margins. As Theresa outlined, our steel platform had an outstanding year.

The teams executed the highest level, levering a reverse market environment while innovatively optimizing our assets. Domestic steel demand was strong throughout the year. Steel consumption increased based on the strength of the automotive, construction and energy sectors.

We also experienced a decline in total finished steel imports on both an absolute basis and as a percentage of consumption. We believe both U.S. and Mexican steel consumption will continue to improve in the coming years, with Mexican growth outpacing that of the U.S. based on meaningful increases in their manufacturing phase.

We continue to position Steel Dynamics for the future through optimization of existing operations, organic investments and transactional growth. During 2018, we invested almost $190 million in our existing steel operations and acquired Heartland Steel, a 1 million ton flat-rolled processing facility.

We completed a $38 million, 200,000 ton reinforcing bar expansion at our Roanoke Bar Division in the third quarter. We’re the only independent supplier in the area. We also just recently completed a 240,000 ton, $82 million expansion of rebar at our Structural and Rail Division. This expansion includes cut-to-length and cold rebar capability.

Our unique rebar supply chain model is expected to meaningfully enhance customer optionality and flexibility, providing significant logistics, yield and working capital benefits to our customers.

In addition, we’ll be the largest independent rebar supplier in the Midwest region, and we expect rebar shipments from the Structural and Rail Division to begin next month.

Our acquisition of Heartland at the end of June was a great strategic addition, increasing our product diversification through value-added, wider and lighter gauge product capability. Its geographic proximity to our existing Midwest flat roll operations also allows for meaningful value creation.

Integration is going well, but there’s still work to be done. We plan to reach an annual run rate of about 80% to 90% of capacity by midyear 2019. Heartland provides a unique margin-enhancing opportunity for us. And these are just some of the numerous organic projects that were completed in 2018 that we’ll benefit for the coming years.

During 2018, we also announced further growth for our Columbus Flat Roll Division. In the last two years, Columbus has transformed its product portfolio through the addition of a paint line and the introduction of more complex grades of flat-rolled steel.

The shift of product to these diversified, value-added outlet has reduced the amount of volume available to our existing galvanized steel customers. So to address this lack of sufficient galvanizing capacity, in June of 2018, we announced the addition of a third galvanizing line at Columbus.

This $140 million investment is another step of further value-added diversification to the mill and less hot-rolled coil exposure. The 400,000 ton line is planned to begin operating midyear 2020.

Additionally, during the next 18 months, we plan to invest about $90 million in Columbus to further increase Columbus’ range of complex grade capabilities, including advanced high-strength steels. I’m also excited about the expansive opportunities and long-term value creation of our Southwest U.S.

and Mexico growth strategy will provide Steel Dynamics. Each of our operating platforms have an existing presence in the region today, but we’re on the move and planning to meaningfully expand our influence in all platforms. The recently announced plant construction of our new flat roll steel mill in the Southwestern U.S.

is a significant piece of the plant. The facility is designed to have an annual production capability of 3 million tons and include a 450,000 ton galvanizing line and a 250,000 ton paint line with Galvalume capability. We estimate the investment to be between $1.7 billion and $1.8 billion.

The new mill will have capabilities beyond existing electric-arc-furnace flat roll steel reducers, competing even more effectively with the integrated steel model and foreign competition. We’re not just adding production capacity, we have targeted markets and the new mill will have competitive advantages in those areas.

We have targeted three regional markets representing over 27 million to 28 million tons of relevant flat roll steel consumption, and we believe that demand will increase in the coming years.

These regions include approximately 8 million tons of demand from the four-state Texas, Oklahoma, Louisiana and Arkansas area, which has limited domestic regional supply and relies heavily on imports; secondly, approximately 4 million tons from the underserved West Coast region, which relies heavily on imports as well; and approximately 16 million tons from the growing Northern and Mid-Central Mexican region.

Based on their growing manufacturing base, we believe Mexican demand growth will continue to outpace supply, making this an even more attractive, underserved market in the future. A significant competitive advantage lies in the intended location of the facility central to these opportunities.

The mill will provide a significant freight cost advantage and shorter lead times to many customers in the U.S. and Mexico regions. This will provide a competitive supply chain that will be an effective option to imports flowing into Houston and the West Coast.

Our customers are incredibly excited and have already expressed interest in possibly locating facilities on or near our site. From a raw materials perspective, our Metals Recycling Operations already control scrap in Mexico due to our scrap management relationships, much of which is prime scrap.

We also plan to cost-effectively source pig iron through the port systems. Based on our current scrap relationships both in Mexico and the Southern U.S., we are confident in the ability to procure high-quality scrap in the region. Developing our flat roll steel strategy for this region and Mexico has been in the making for several years.

We’ve been developing both customer and raw material supply relationships and are confident in the long-term strategic value and investment profile this project provides.

We believe our unique operating culture, coupled with our considerable experience in successfully constructing and operating cost-effective and highly profitable steel mills, positions us well to execute this greenfield opportunity. We’re also optimistic about our existing market opportunities for 2019.

We believe North American steel consumption will continue to see a steady increase and grow through the year. Furthermore, the actions the U.S. federal government has made to develop a healthy domestic steel industry should provide sustainable, long-term support to the U.S. manufacturing base and continue to erode import volume.

Specific to Steel Dynamics, our unique culture and the execution of our long-term strategy continues to strengthen our financial position through strong cash flow generation and long-term value creation, demonstrating our sustainability and differentiating us from our competition.

Customer focus, coupled with market diversification and low-cost operating platforms, support our ability to maintain our best-in-class performance and differentiation. The company and the team are poised for continued organic and transactional growth. Our phenomenal team provides the foundation for our success.

I thank each of you for your passion and your commitment to excellence and remind you safety is always our first priority. We are committed to providing exemplary long-term value to our team, our communities, customers and shareholders alike and look forward to creating new opportunities and additional value in the years ahead.

So once again, thank you for your time today, and Karen, please open up the call for questions..

[Operator Instructions] And our first question comes from Chris Terry from Deutsche Bank. Please state your question..

Hi, Mark and team. Thanks for taking my question. Just in terms of the 3 million-ton facility you’re going to build in the south, you mentioned the location strategically with customers.

I was just wondering if you could talk through whether you have a baseload commitment, how the qualification period would work for customers and the sort of numbers of customers you’re talking about, please. Thank you..

I think, obviously, it’s a little too early to have a full baseload when the mill is scheduled for a mid-2021 -- summer 2021 startup. I will say, though, that with our Columbus facility, we have good knowledge within the Southwest area, I think 600,000 tons or so, perhaps a little bit more.

We have 600,000 to 800,000 tons currently flows into the Southwest and about 120,000 tons flowed into Mexico last year. And we believe that the two mills will be complementary going forward. But nonetheless, we know the customer base is there, and we are very, very optimistic that the baseload will be debarked.

We are looking at developing the site with kind of an industrial campus perspective, not unlike Butler. If you were to go to Butler today, we have right next door, I think, five, six, maybe seven facilities employing 1,500, 1,600 folks and consuming a good, I would say, 400,000, 500,000 tons a year, and our strategy will be to emulate that.

And the initial customer excitement is, in all honesty, beyond expectation. I think you go -- and this may be simplistic, but if you just take the math and you put little red spots or blue spots or green spots on flat-rolled producing sites at the mills, you see an absolute void in the Texas, Oklahoma, Louisiana, Arkansas region, a total void.

That region is having to be served at a distance at a high freight number from domestic mills and obviously from imports. A large amount has been served by imports coming through to reduce them.

The customer excitement, I think, is that they’ve never had a regional presence there, so they haven’t been able to expand their own operations to an extent that they would like, and they see this as that opportunity..

Excellent, thank you. And our next question comes from Seth Rosenfeld from Jefferies Financial. Please state your question..

Good morning. Thank you for taking my question. Just to follow up on the southwest mill. Can you please give us a bit of an update on broader capital allocation strategy? Clearly, many investors somewhat surprised by that investment last year.

Can you give us an update on how you’re prioritizing organic versus inorganic growth moving forward and whether you think the company has firepower for additional growth initiatives that could be announced in the medium term? Thank you..

Good morning. This is Theresa.

Yes, so from a capital allocation perspective, given the time frame over which these dollars are expected to be spent and given the cash that we’ll be generating during that time frame, we firmly believe that we still have the ability to not only grow organically with this facility and with the other projects that we’ve announced thus far, including the Columbus galvanizing line, but we also have the capability to do some transactional – and to also continue with our shareholder distributions through both the positive dividend profile and the continuation of a share repurchase program.

So we don’t believe that this facility in and of itself curtails any of the other opportunities or options that we have from a capital allocation perspective..

Thank you. And our next question comes from Piyush Sood from Morgan Stanley. Please state your question. Piyush, are you on the line? Your line is live, please state your question..

Mark, Theresa, congratulation on the quarter. I saw your full year constructive guide. And when we compare back to what we’re reading and channel checks, seems like there’s an ongoing buyer’s strike.

So do you think we should build some level of conservatism in our 1Q outlook and then a shipment rebound in 2Q? Or do you think the buyer’s strike is a little hyped up right now?.

From a buyer’s strike perspective, I think the question is whether or not you think that we’ll have the benefit of a stronger second quarter.

Is that the question?.

That, and in terms of shipments, should we expect something similar to what we saw last year? Or is there a skew that’s maybe leaning towards 2Q or with the second half?.

Okay. I think you’re right that there has been some buyer hesitancy. I believe it coincides with a raw material fixture that has been depressed in the last two or three months.

As we’ve seen many, many times in the past, when there’s an expectation of continued downward pressure on scrap pricing, the steel consumer expecting lower pricing tends to limit their buy to just what they need and don’t necessary want to speculate on their own inventories. I would suggest, though, that we’re at the bottom.

I do think, as we’ve seen and I stated many times before, there’s a tendency for everyone to just jump out of the market, and then all of a sudden, everyone jumps back in the market, and we’re getting to that point. But I do believe underlying demand still remains very, very solid and will grow in 2019. Automotive is – momentum continues its pace.

And I got to say, hats off to our Columbus mill because we continue to pick up market share in automotive. They shipped 400,000 tons into the automotive markets last year. If you remember, just a few years ago, that was almost zero. And the traction of the direct automotive team has been absolutely phenomenal.

And we see that continuing to grow as we’re on – we got commitments on future platforms. So again, kudos to the direct auto team, to John Nolan, who’s been leading that, and Dave and everyone. But for us, auto is a growing market share opportunity. Construction, we continue to see growth there. As you saw, Columbia City had record shipments in 2018.

As a sort of barometer through New Millennium Building Systems, we’re seeing a very, very strong backlog there. Activity is – continues to be very, very strong and up, which I think bodes well for that industry. We’re seeing projects get pushed a little bit back. Those projects are not getting canceled.

It’s just getting pushed back, I think, through lack of construction labor. And so that gives, I think, legs, continued legs for that part of the industry. Structural and Rail Division also, I think, benefiting from rail. We’ve got about 30% market share there. We shipped almost, almost my target of 300,000 tons, so congratulations there.

And I think that will continue to grow. The tariffs are having an impact on the West Coast. The Japanese, Asian rail is inhibited from coming in, and that’s opening up greater markets for rail in the U.S. Another large market for us, obviously, energy. Energy has remained strong.

A little hesitation here and there but having been with several of our very, very large energy customers over the last two to three weeks, they are incredibly bullish. The – with oil pricing where it is today, the energy companies can make money, will continue to drill, and with that, imports – I mean, exports are expected to increase.

And today, they’re flaring off a massive amount of the gas, which needs to be collected and utilized and levered. So they feel that the collection and distribution pipeline is going to be a very, very strong market for the next two, three years for sure. Then more generally, manufacturing, the other goods, truck, trailer, all remain strong.

So we see a very healthy market environment for 2019. And with that, we think that demand or the order rate will pick up here in the next week or two and things will reverse..

Let me just add, so Mark gave a great market overview, but as it relates to Steel Dynamics specifically, in addition to that, one should remember that the first half of last year, we didn’t have Heartland within our portfolio.

We also really didn’t have the projects that have allowed us to access the extra melting capacity of the Structural and Rail Division in Roanoke, which opens up several hundred thousand tons of additional opportunity for us in 2019..

Excellent. Thank you. And our next question comes from Timna Tanners from Bank of America. Please state your question..

Happy 2019 guys, Mark and Theresa..

Thank you..

Thank you..

Wanted to – I know you just went through the demand side. I want to ask you a little bit more about what you’re seeing on the supply side, both right now but also once your new mill is starting up.

So in light of the current environment, are you seeing fewer imports because we can’t see that on the government website right now? And also, anything you can tell us about the new capacity from Mingo Junction getting absorbed? And then along the same lines, on the supply side, once you start up the new mill, do you envision taking in share from integrated since you mentioned some of the capabilities overlapping there? Do you envision replacing some of the existing Mexican capacity? If you can just discuss that a little further..

I’ll take the – which order should we go in? I think, generally, on the supply side, much of a supply-demand balance. On coated and – coated sheet, coated, pre-paint, we see very, very strong demand and supply tightness, I do believe. And so that order book is very, very good for us. Lead times are five to six weeks out in the most part.

We are seeing a little softness, and you’re seeing that in the pricing in the marketplace right now. Obviously, in hot-rolled coil, you do have imports of hot-rolled coil specifically jumped up. You also – as you said, you have JSW Mingo Junction trying to penetrate the marketplace, not with very many tons.

Unfortunately, sometimes, it only takes a few tons to pressure a market environment. So we are seeing a little bit of the impact there. Granite City obviously coming back.

Again, though, I think once the uncertainty of the environment and the – not the uncertainty but recognition that scrap pricing is probably going to be a level in the months ahead, people are going to jump back in and start buying.

Relative to taking market share for the new mill, again – and there was – I got to say that I was a little disappointed with the muted reaction from some of the analyst community on our announcement maybe because we didn’t describe it well enough, I don’t know.

But that is a phenomenal – in my mind, the industrial logic there, strategic logic is incredible and will create a lot of long-term value creation because the mill will be differentiated from a technology process perspective. It’s going to broaden our portfolio of products. We’re going to 84-inch mill.

It’s got the capability of, call it, 100 ksi at 1-inch thick, so it’s going to be brew to the mill. And you can consider it – I guess envision it as a kind of electric-arc-furnace mini-mill kind of hot end with an integrated style sort of cast through hot strip mill.

The cast will be a thicker section, and the mill is going to allow us to improve on a thermal mechanical rolling perspective. And that’s going to get us into the high-strength API grades that no electric-arc-furnace supplier can provide today, and it’s certainly sort of a remaining bastion of the integrated mills.

So will we gain market share there? I would certainly hope so. And again, we’ll be taking a large chunk of market share from imports. So that 3 million tons shouldn’t be viewed as direct competition to American capability, there’s 68% of energy goods, 68% or so of energy pipe and tube is in the Texas arena.

About 40% of that is in Houston – some amount of tube is flowing into the Houston region. And unfortunately, given the trade expense to get domestic steel down there, the American pipe manufacturers have been at a disadvantage.

With us in the region eliminating that trade disadvantage and as informally, given short lead times, they’ll be able to order on a short-term basis. They won’t have to wait for three weeks or four weeks for the stuff to come down the river or two or three months for inputs coming in.

Those advantages will certainly allow us to take a large chunk of the import market that’s flowing into Houston. And the sites that we have auctioned can get us to the West Coast on a very freight advantage basis, and that opens up about a 3.5 million to 4 million ton marketplace out there as well.

So we’re absolutely incredibly excited by the opportunity, and in all honesty, as we talk to our customers each and every day, I just get more excited..

Okay, thank you..

Thank you. And our next question comes from David Gagliano from BMO Capital. Please state your question..

Hi, good morning, Mark and Theresa. I have a related question to some of the comments you just made. Obviously, sounds like a phenomenal greenfield project in and of itself. I think part of the reason for the muted reaction is there’s a decent amount of concern out there about the 2021, 2022 bigger picture supply-demand balance.

And obviously, just like you’re going to go after market share to the extent of imports, which obviously makes sense, but my question is in a bare case pricing scenario, what type of hot-rolled coil pricing environment would you consider pausing that mill, that expand – or that project? And at what point would you be too far into the project to put it on hold given the time line that you just touched on a minute ago? Thanks..

We always look at the investments on a through-cycle basis. This is not a trade play, hoping that the trade environment is going to be positive forever. It’s a market play. The mill is going to be able to deliver a differentiated product that certainly no EF producer will be able to produce at least today.

That differentiated product going into the southwest market and into Mexico will, I think, allow that mill to have high utilization rate than the typical industry rate at any point of the cycle. So yes, we’re in a steel environment. We’re in a steel industry.

We cycle up and down, but we feel that the through-cycle return metrics, the cash generation capability of this mill gives it a very good return for our shareholders..

But just as a reminder, and I think you all know this, but when we look at transactional opportunities, we look at through cycle not trying to guess where the cycle is at any point in time to make sure the cash sustainability is there. We also do that with our organic projects.

So to Mark’s point, this facility has been tested on the perspective of capital allocation and investment premise and value creation through that. So it doesn’t really matter that we may be in an environment in 2018 where we have peak spreads. We use through-cycle spreads. We will measure that profitability.

And we’re not in a point in time yet we will talk about returns on this facility simply because we’re still doing a lot of work along the time lines and looking at what’s the configuration will actually entail from a cost perspective. But when it’s time, absolutely, we’ll happily to do that..

And again, it’s just our belief. And we have always – when we see a supply chain advantage, whether it be our paint business or whether that be our long rail business, there’s always room for a very, very cost-effective, efficient provider of new products. And so through cycle, I’ve got no concern..

All right. That’s helpful. Thanks..

Thank you. And our next question comes from Alex Hacking from Citi. Please state your question..

Hi, good morning, Mark and Theresa and Happy New Year. I have a couple of follow-up questions on the new mill, if that’s okay.

Firstly, are there key milestones that we should be looking out for next year? And then secondly, on the 3 million tons, do you have any preliminary estimates about how that’s going to end up in terms of end markets, automotive, energy, you mentioned earlier machinery, et cetera. Thank you..

So from a schedule standpoint, we – as I said, sites have been certainly auctioned, both including the incentive package negotiations. And I would imagine within – it gives a little bit of freedom here, but probably six weeks to eight weeks, we should have that in hand.

And we’re tweaking that, looking at logistics, rail, just a couple of little things to site here. But then hopefully, eight weeks or so, we should be able to announce the specific site. And once we do, I think you’ll see the incredible strategic logic in that site.

From the standpoint of markets, roughly 40% or so moving to Mexico, 60% going into that four-state region. And again, just to remind you, that four-state region has kind of 8 million tons of demand currently. Mexico has roughly 50 million tons of demand, expected to grow by 2025 to, I think, roughly 20 million, 21 million tons.

And today, 40 million tons of that are imported, are still short..

You mean 40%..

40%, sorry, is imported. And there’s a dislocation between mill capability within Mexico and demand requirements. And so there’s a growing gap actually between the total sheet and coated as the automobile industry ramps up there..

Thank you. And our next question comes from Phil Gibbs from KeyBanc. Please state your question..

Hey, good morning. Just had a couple of questions a little bit on just the statistical side here.

So the performance comp, Theresa, and the IDI maintenance piece, where do those flow through on a segment basis?.

They all roll through the Steel segment because Iron Dynamics is captive with Flat Roll Division. It resides within our Steel segment..

Okay. Perfect.

And then if I could, the mix on the sheet side?.

That probably is going to be still up in the cycle. For the fourth quarter, the mix on flat roll products, we had 873,000 tons of hot-rolled and P&O. We had 103,000 – excuse me, 132,000 tons of cold-rolled and 751,000 tons of coated. Apologies for that..

Yes, no problem.

And then just to be clear, the $250-ish million at your midpoint for the investment in the new mill, is that something that you definitively plan on putting in, in this year’s numbers? Meaning, is that something that we should be baking into our models? Or should we await basically the go-ahead there with a further announcement? Or is that something that we should basically just go ahead and start thinking is in the numbers?.

Actually, the first $200 million to $300 million that we’re talking about for 2019 is really downpayments on equipment. It’s purchase of the actual land itself. It’s engineering work. So you absolutely should put that in your estimates for cash allocation..

Okay. Thanks very much..

Thank you. And our next question comes from Derek Hernandez from Seaport Global. Please state your question..

Hi, good morning everyone. I just wanted to switch gears quickly on the fabricated backlog being stronger year-over-year. Would this be primarily elevated pricing for the segment? Or do you also anticipate a significant volume increase for 2019 over 2018? Thanks..

No, the question relates to fabrication, Chris, and we said the backlog is up year-over- year. And some of that is related to price appreciation that we’ve been able to garner here going into the 2019 time frame, but it’s also volume-related. It’s not….

Yes. The backlog from a tonnage basis is also up as well, Theresa..

And so we’re expecting to see pretty robust volumes next year based on the customer optimism?.

Yes. The market chatter regarding 2019 is nothing but positive. The things we watch for, the Architectural Billings Index is still well north of 50, in the 54- plus range. We continue to see a healthy mix of big-box institutional and manufacturing. So everything points to a good 2019.

On a New Millennium – from a New Millennium standpoint, our December bookings were rather robust, up nearly 30% higher than last year. That’s not always indicative of the overall market, but our team is seeing success and positioning itself well for 2019..

And I think another point to add to that is that even in 2018 with our record shipments, that really would not just based on market share gain. It was really across the board, the joist and deck shipments in the U.S. or consumption in the U.S. actually improved pretty meaningfully last year..

Yes, it’s the high, obviously since the since 2007, we’re still below what used to be considered the 20 year average of maybe 1.2 million tons a year joist production. I think that the market booked – industry booked about a little over 1.1 million this year. So we believe there is still runway left there..

Thanks very much..

Thank you. And our next question comes from Matthew Fields from Bank of America. Please state your question..

Just wanted to get your updated thoughts on investment- grade credit rating with the new mill announcement and maybe some increased shareholder returns. Just wanted to get your current thoughts on how important to you an investment-grade credit rating was and what, if anything, you guys are willing to do to achieve it..

Great question, Matt. I expected to have that. So based on, again, the period of time over which these dollars are going to be spent for the new facility, we absolutely believe that our credit metrics can still be maintained at investment-grade levels while doing new organic projects.

We do believe that there’s room also for the additional continued shareholder return. And so it would be our expectation that – I think as I said on the last call, we’ve been dialoguing with the agencies. We’re not in a position at this point in time to make a firm commitment on this call, but we’re definitely having those conversations..

So would you say it’s sort of as important – it continues to be more important to you to be investment- grade than maybe a year ago when it would have been nice but not necessary?.

I would say that’s true..

Okay. Thanks very much..

Thank you. And we have another question from Piyush Sood from Morgan Stanley. Please state your question. Piyush your line is live. Do you have another question? And we have a question from Tyler Kenyon from Cowen. Please state your question..

All right. Good morning Mark, Theresa and team. Happy New Year..

Happy New Year..

Thank you. So we talked a bit about sheet supply and demand dynamics and just was wondering if you could cover a little bit more as to what you’re seeing from a demand and supply perspective just within some of the long product categories, so rebar, merchant, structural and SBQ please..

I’ll take the – jump in the [indiscernible] timing, but I think the engineered bar SBQ world is very, very healthy. We were able to have an uptick in pricing for 2019. Like everywhere else, there’s a slight hesitancy in December as – because – although the prices go up, they’re indexed with the scrap.

So they’re not sort of speculating on their own inventory. But the customer base is incredibly bullish, I do believe that. Interestingly, down there, the inspection line – these are small organic projects, but the inspection line down there was commissioned as planned, and I think it’s up and running and is almost at production capability.

And we have a turning line up that’s going in there that will get commissioned later this quarter. And those helped draw volumes through the system, certainly needed for the automotive grades that we were ramping up. But generally, a very, very healthy environment at engineered bar.

As I said, Structural, Rail Division at Columbia City, very, very strong. Record shipments last year. Pushing up toward a two million ton shipping rate through – for 2019 will be an expectation there. Merchant and shapes in Roanoke, a little soft. Again, they tend to be impacted probably more than anyone to the rise and fall of scrap..

Thank you..

And that does conclude our question-and-answer session. I’d like to turn the call back over to Mr. Millet for any closing remarks..

Thank you, Karen. Thanks for your help today. And to our employees out there, again, a million kudos and thanks for an absolutely outstanding, outstanding year. Remind you to be safe in everything we do. And to our customers and vendors, we certainly can’t do without you, so thanks for your support.

And our shareholders, we will continue to demonstrate the growth and shareholder value that we have demonstrated in the past. Expect it going forward. So great, have a great day. Be safe..

Once again ladies and gentlemen that concludes today’s call. Thank you for your participation. And have a great and safe day..