And welcome to the Data I/O Corporation First Quarter 2020 Financial Results Conference Call. All participants will be in a listen-only mode. [Operator Instructions] After today's presentation, there will be an opportunity to ask questions. [Operator Instructions] Please note this event is being recorded.

I would now like to turn the conference over to Jordan Darrow. Please go ahead..

Thank you Grant, and welcome everyone to the Data I/O Corporation first quarter 2020 financial results conference call. With me today are Anthony Ambrose, President and CEO of Data I/O Corporation; and Joel Hatlen, Chief Operating Officer and Chief Financial Officer of Data I/O.

Before we begin, I'd like to remind you that statements made in this conference call concerning COVID-19, future revenues results from operations, financial position, markets, economic conditions, estimated impact of tax reform, product releases, new industry partnerships and any other statements that may be construed as a prediction of future performance or events are forward-looking statements, which involve known and unknown risks, uncertainties and other factors, which may cause actual results to differ materially from those expressed or implied by such statements.

These factors include uncertainties as to the impact from the COVID-19 pandemic along with expected reopening and recovery efforts within the supply chain and among our customer base.

Levels of orders, ability to report revenues based upon the timing of product deliveries and installations, market acceptance of new products, changes in economic conditions and market demand, pricing and other activities by competitors and other risks including those described from time-to-time in the company's filings on Form 10-K and 10-Q with the Securities and Exchange Commission, press releases and other communications.

The accuracy and completeness of forward-looking statements should not be unduly relied upon. Data I/O is under no duty to update any of these forward-looking statements. Beyond today's conference call, our next interaction with shareholders will be at our Annual Meeting to be held on May 18 at 10:00 a.m.

Pacific time at our corporate headquarters in Redmond, Washington. In this event, since our proxy agent was unable to handle mailing of documents to certain shareholders due to COVID-19 challenges, we have made our information available via Internet delivery as needed.

We have provided ample time for all shareholders to cast their votes and we hope you do. Shareholders may not come to our offices, but instead may avoid social gathering risk by listening to our annual meeting via conference call. Participation details are available on our website in the Investor Relations section.

Now I would like to turn over the call to Anthony Ambrose, President and CEO of Data I/O..

number one is keeping our people and their families safe; number two is keeping our facilities safe and secure; and three is serving our customers. As an essential supplier to the medical and aerospace industries, Data I/O remained open for business. We've been vigilant in keeping our employees and our facilities safe.

We required most of our workforce to operate remotely, while maintaining a core on-site group to staff our manufacturing, service and support operations. Our global teams follow recommended best practices in accordance with and often in advance of local government mandates.

Local health authorities are reporting steady progress in each of our operating locations. And I'd like to take this time to recognize the efforts of our entire global workforce, who've risen to the occasion and kept our workplaces, their communities and families safe, while continuing to support our customers.

We believe our business and operational strategies have proven helpful as we manage the effects of COVID-19. We remain globally diversified, which provides competitive advantages as well as an inherent hedge to location risk.

This diversification spans manufacturing for a multi-source supply chain, engineering, as well as in our customer base vertical markets and customer support. From a financial perspective, we entered the crisis in a position of strength. Data I/O is the largest company in our industry and we have the strongest balance sheet. We are debt-free.

At the end of the first quarter, we had $13.8 million in cash or about $1.68 per share of cash. We believe we're better prepared than anyone else in our industry to ride out whatever may come forward and are taking proactive steps to keep it that way.

Beginning Q1 and early in the second quarter, we implemented cash conservation and expense management initiatives including reductions and deferrals in executive and Board level compensation. We also reduced work weeks for certain locations and functions.

We'll continue to evaluate on a case-by-case basis all government programs worldwide that help us preserve our workforce and cash flow at the same time. At this time, however, we do not plan to accept funding from SBA PPP program in the United States. Meanwhile, we remain committed to our long-term business objectives.

Unlike other industries, we believe the long-term electronics industry will recover and require a secure high-quality device programming as it recovers. Data I/O has consistently been at the forefront of the industry. First quarter was no different, as we continue to invest in our leading data programming and security provisioning platforms.

Our innovations and ultrafast performance and reliability were recognized in the quarter. In addition we're honored to have received the coveted Service Excellence Award for device program support for the second consecutive year. Our engineering innovations and comprehensive customer support seem to be resonating with customers around the world.

During the first quarter, our global sales channels and world-class products enable us to win systems orders at new automotive customer locations in Asia, North America, and Europe, as well as being selected by a global ventilator electronics manufacturer to ramp their production of very important ventilators to fight COVID-19.

We're very proud to be supporting the medical manufacturers and their EMS partners and announced the target program to provide our fastest support to customers building COVID-19-related products.

Economic times and markets may change, but the reasons we are selected by customers remain the same; outstanding products, great customer support, financial stability, and global capability.

Overall, worldwide the automotive electronics market from which we've generated about half of our revenue for the past several years has been materially impacted by plant closures. We've seen China factories reopening although the U.S., Mexico, and Europe remain shut down.

Guidance from leading customers indicate Europe and America locations will be reopening soon and ramping output later in the second quarter with the expectation of normal production by the fourth quarter of this year.

Within automotive electronics, we continue to believe that the sector tracks a substantial multiyear increase in content per vehicle and complexity and design and programming requirements including the transition from eMMC to UFS flash storage.

You'll recall that UFS is the next-generation flash memory using the latest automotive designs to support their projected growth and programmable content and performance. While we're still in a very fluid situation with short-term sales funnel puts and takes, our conviction remains that the industry will need to reinvest.

When that happens whether or not we're the last one standing, Data I/O will be in a position to gain market share with the most robust programming innovations.

For our other key target markets and Internet of Things, the rapid adoption of work-at-home policies amid COVID-19 underscores the importance of security at all ends of the connected electronics ecosystem. You've seen reports of hacking incidents are way up not just with home workers, but with the associated IoT devices as well.

Our SentriX platform a highly robust and flexible cost-effective security provisioning and data programming deployment system for authentication devices secure elements and secure microcontrollers has experienced steady interest despite the recent stress on the overall economy.

The low capital investment -- SentriX model is becoming even more attractive to companies to require solutions on tight budgets. Our marketing mix is shifting as well in response to COVID-19.

While some of our key conferences have been canceled, we'll continue to look for ways to expand our market and other venues and through other channels besides trade shows with enhancements in our digital marketing platform. Our strategy for SentriX is to continue to expand its presence and simplify and scale the overall platform in 2020.

Our strong cash position maintained by rapid actions combined with our long-term view of the markets gives us the financial flexibility and a launching path for growth as conditions improve.

In these uncertain times, it's our intent to remain agile, improve our processes, follow our product roadmaps, protect our superior financial condition, and grow relative to the competition. With that, I'll turn it over to Joel Hatlen, our Chief Operating Officer and Chief Financial Officer provide more details on the quarter.

Joel?.

Thank you, Anthony. Good day to everyone. Net sales in the first quarter of 2020 were $4.8 million as compared with $6.1 million in the prior year's period and $5.9 million in the fourth quarter of 2019.

First quarter 2020 bookings were $4.3 million as compared with $6.2 million in the first quarter of 2019 and $6.9 million in the fourth quarter of 2019. On a geographic basis, international sales represented approximately 94.3% of total net sales for the first quarter of 2020 compared with 94.1% in the 2019 period.

Total capital equipment sales were 54% of revenues and adapters and service revenues were 28% and 18% respectively of revenues in the first quarter of 2020 compared with 61%, 24%, and 15% respectively of revenues for the first quarter of 2019.

Gross margin as a percentage of sales in the first quarter of 2020 was 58.2% as compared to 60.8% in the first quarter of 2019. For the first quarter of 2020, gross margin was primarily impacted by fixed costs being spread over lower revenues and a 2.7% reduction that relates to tariffs on U.S. and China trade.

The revenue mix shift to increased percentages of adapters and recurring revenue sales as a percentage of total revenues benefited gross margins as these generally have higher margins as compared to equipment sales. Operating expenses were down, both compared to the prior year and the prior quarter periods.

The year-over-year change is primarily related to variable expenses including substantially lower incentive compensation, accruals and sales commissions as well as stock-based compensation. Cost control measures also significantly contributed to the reduction. With most other expense categories lower than in prior periods.

Although R&D spending of $1.6 million was down compared with the prior year period, it came in consistent with the fourth quarter spending as we continue to invest in leading the industry and providing improved solutions for our customers.

In accordance with GAAP, net loss in the first quarter 2020 was a loss of $554,000 or $0.07 per share compared with net income of $26,000 or zero per diluted share in the first quarter of 2019. Backlog at March 31, 2020 was $2.3 million as compared with $2.9 million at the end of the year and up from $2 million at March 31 of 2019.

Data I/O had $1.5 million in deferred revenue at the end of the first quarter consistent with the end of the fourth quarter of 2019. Data I/O's financial condition remains strong with cash of $13.8 million at March 31, 2020 approximately $100,000 less than at the beginning of the year.

Our days sales outstanding or DSO, a receivables collection measure at March 31 were below our 68 target range with the receivables reduced by $1 million from good collection efforts from the end of the fourth quarter. Payables were reduced to $3.6 million at the end of the quarter compared to $4.1 million at the end of the prior year.

Net working capital at the end of the first quarter was $18.4 million down slightly from $18.5 million at 12/31 of 2019. This benefited from the Cares Act acceleration of our alternative minimum tax refund from tax reform back in 2017.

Finally, we had shares outstanding of 8,221,000 at March 31, 2020 as compared with 8,288,000 at March 31 2019 with the difference primarily related to the share buyback that we completed during the third quarter of 2019. That concludes my remarks. I'll turn the call back to the operator to begin the question-and-answer segment.

Operator, will you please start the Q&A process?.

We will now begin the question and answer session. [Operator Instructions] Our first question will come from Jaeson Schmidt with Lake Street. Please go ahead..

Hey, guys. Thanks for taking my questions.

Just curious if you could comment what you're seeing from an order pattern standpoint in the month of April compared to the end of March?.

So, Jaeson, that's a good question. I won't get too quantitative. I'll just say this. We're not seeing the end of the world out there, okay? People are still buying things. CapEx was down in Q1. When we put our internal numbers and forecast together, for Q2 we assume CapEx would be impacted as well. But it's not the end of the world.

We've definitely seen an impact, but it's not like we've fallen off a cliff or anything..

Okay. That's helpful. And then as a follow-up, I know in the script you mentioned an order for an electronics manufacturer in the ventilator market.

Just curious if this is more of a one-off win, or if you've seen sort of sustained inbound interest from the health care medical market as a whole?.

Well, we haven't talked too much about in the past. We actually have a pretty good medical business. We haven't broken it out. It's been considered part of our industrial business up till now which is run between, I don't know, Joel, 20% and 25% of our overall business for several years in that range..

Yes. It fluctuates 15% to 25%..

Yeah. And then probably some more in the programming centers as well. But we called that the specific win, because number one, we put together a program for medical customers to make sure that they could quickly repurpose equipment to support new medical needs.

That's actually one of the big advantages of the Data I/O technology is with our pre-programming, you can convert from a part that might be supporting a ventilation system in a car, and in 30 minutes you can be reprogramming now to support a ventilator for a hospital. We can convert the line that quickly.

And so a customer came to us, they had a problem. They'd actually prototyped on a alternative programming solution and found that the performance was terrible. They came to us with LumenX and we were able to get them about an 8X performance game. And they move very rapidly to place an order with us and get that to support their ramp.

And the end customer we don't have the permission to use their name. But if you Google big government orders of ventilators, you can figure out one of the two companies..

Okay. Thanks a lot, guys..

Our next question will come from Keith James [ph] with LJ Capital. Please go ahead..

Hi. Can you discuss the margin profile by revenue type for capital equipment sales, adapters, maintenance and software upgrades and per click fees for SentriX programming, please? Thanks..

Yes. I won't go into too much detail. But in general the software obviously carries higher margins. Services tend to carry pretty good margins as well. The capital equipment, it really depends on not only the type of system ordered but the channel. And I'll give you an example.

So if we sell-through a direct sales channel, we'll tend to have a higher gross margin and also a higher sales expense because we'll pay commissions. If we sell-through a distributor, we'll have a lower gross margin on that equipment because we provide the equipment at a discount to the distributor.

At the same time our sales commissions will be much lower because the commission has been taken in the form of a product discount. So it's fairly variable. But within those broad parameters that's the pattern of our business..

Okay. Thank you. I had one other question as well. You've mentioned the transition from eMMC to UFS can you talk more about what this means in the automotive electronics sector with near and longer-term perspectives? And where your technology stand relative to what else is available in the market from your competitors? Thank you..

Sure. So as you know the semiconductor industry from time-to-time adopts certain standards for widely used components such as flash memory. eMMC was that broadly deployed standard in the PC industry, the mobile phone industry, automotive electronics for the better part of a decade.

Starting in mobile phones probably three or four years ago there was a transition to a new form of memory interface called UFS. Without drilling down too far, it provides a much higher read capability a much better non-sequential read capability meaning if you switch around from application-to-application, you get the data faster.

And it also is able to operate at lower power. That was very attractive for the mobile phone industry and they adopted it first. And as the industry in general move towards UFS, the cost patterns and reliability characteristics were consistent with what was required for the automotive industry.

And they've been moving a lot of the high-density flash memory applications, such as infotainment in Dash computing displays, things like that to UFS. That's actually very good for Data I/O because we're one of the handful of suppliers that can actually program us in the market. eMMC pretty much anybody could do it.

We did it better of course, because it's much faster. But right now we're one of two or three suppliers that have announced the capability to support UFS. And when we're able to sit down with customers we can explain why our approach has some very important technical benefits that maybe some others don't.

So the move to UFS, we view generally is very favorable to Data I/O, because we have a unique technology position. And also we're offering upgrades to existing deployed equipment in automotive that make the transition to UFS very cost-effective for the customer..

Than you very much..

Our next question will come from George Melas with MKH Management. Please go ahead..

Good afternoon, Anthony and Joel..

Hi, George..

Hi. Anthony, you mentioned in the press release and also in your remarks that you had won three new auto – you have three new automotive wins in Asia, America and Europe. That seems pretty impressive. Can you talk a little bit about that? I don't know how much detail you can provide but how big those are? And I imagine these are competitive wins..

Exactly George. And I called it out specifically for that. What was otherwise a pretty dismal quarter for capital purchases. People just were not adding capacity. There's still nonetheless, new applications. We talked about infotainment. We've talked about advanced driver assist.

One of them was also in the area of electrification, okay, which is a nice win for us. We hope it's the start of something very nice long-term. We'll see how it plays out. But we've instructed our sales team to continually to go after not only the customers they know, but to pursue the new applications.

And the good news is in automotive, there are a lot of new applications and we have a very good reputation in that industry..

Okay.

Can you explain a little bit what electrification means? What kind of application is that?.

So battery-powered cars..

Oh, okay.

And is that some of your first win in that space or not?.

No. It's not the first, one George. But you would recognize the customer's name..

Okay, great, great. That's great news. Well done. It's amazing to get new customers in this environment.

Quick question about services and maintenance sales that has held up quite well, can you help us -- you sort of remind us, kind of what that is? And how is that holding up as well?.

Well that includes things that are not capital equipment purchases and not, adapter sales. So for example, we offer software contracts. We have customers pay us NRE to do development of algorithms. And other things like that. We have maintenance agreements and things like that. And of course SentriX falls in there as well..

Okay?.

Okay. And it tends to be a little more stable because we'll tend to get an order for an annual contract. And we'll make up -- if it there was $12000 for a contract we take a PO for $12,000 and then amortize it $1,000 a month..

Yeah, yeah..

So it tends to be fairly stable..

Okay.

Great, great and then just on, SentriX, can you sort of point if there is any sort of meaningful progress in the quarter or some relationships that are deepening? And how do you expect centric to play out in 2020?.

Well, the interesting thing about SentriX is you'd be hard-pressed to -- if you looked at our inbound activity to understand there was any COVID-19 effect going on at all. We unfortunately lost a couple of our marketing venues that we were planning on in Q1, and also in Q2 and Q3.

A trade show is not likely to be a good thing from a marketing perspective, maybe for the rest of the year, certainly through probably September. So we're looking at other ways to promote it.

The -- we've had good progress working with semiconductor suppliers, good progress on the underlying technology, good progress on new device supports and good progress on end customers and channel partners coming in with new opportunities..

Okay great. Okay, superb. Thank you very much..

Thank you, George..

[Operator Instructions] Our next question will come from Mark Spiegel with Stanphyl Capital. Please go ahead..

Hi, Anthony, good to speak with you again..

Hey how are you?.

It's been a few days yeah. Well as you -- you may remember, we're value guys. And so we sold basically the stock on the way up. But we're in pretty good now. So thank you. So here's my question. And it's a general question. How much of your business is dependent on the volume of the end product.

And in other words, let's just say hypothetically that, they were using your machine to program the new Mercedes S Class.

And because automotive sales are going to be terrible this year, they sell, I don't know, 80,000 of them instead of 100,000, does that affect you guys, or do you basically just sell them the tool and after that it's -- it doesn't really matter how many of them they sell?.

Well. We're somewhat insulated on volume, but we're not immune to volume effects. So, automotive sales being potentially down would definitely have an impact on the people that buy for capacity. Okay? And -- but as we mentioned earlier, we had three new wins, primarily where there was new technology involved.

So for example, if you're making a major model changeover and you're adding a lot of new features, they have to put in place the capability to produce the car, whether they produce as many as the guys forecast six months ago or not.

Now what we are seeing is customers that may be buying to a certain volume level or thought they were and they were cutting back their forecast. They're still going to buy, but maybe they don't buy as much. Maybe they try and squeeze out two machines, instead of adding a third, that type of thing. So we're not immune. But in general it's volume.

But also remember, it's the amount of bits programmed. So if the feature set doubles the amount of software code, then we've got to program twice as many bits, which mean programming demand goes up. And then finally, the type of bits really matter. Security, obviously, carries quite a premium over standard programming. So, yes, it will have an impact.

No, it's not 100% deterministic and there are other factors involved..

How many machines, do you typically sell for a given model? I mean, is it like one machine can handle 100,000 cars or 50 or 30? I just -- I don't have a grasp of that really?.

Yeah. It really depends on the application. For example if you're talking to infotainment, you might need a couple of machines to support infotainment. And remember we're working with the electronics manufacturer is not the nameplate.

So we might see a general class of applications that go into many models from one end customer or many models from different end customers. So it's hard to draw a one-to-one correlation that I think you're looking for. I just can't give that to you..

Well, is your typical -- last question, is your typical order multiple machines to the same customer for the same application? So they might need five. And in this case they only buy four.

I mean, is it something like that? It's not just one machine per application?.

I think, the typical order is probably -- depending on how you define applications, probably one or two per applications.

But over time, the factories end up with multiple versions of our equipment because they're dealing with multiple model years, multiple applications et cetera?.

Well, that they couldn't avoid that. So if there's a new model year, are they forced to buy a new machine or -- I'm trying to -- I guess, it goes back to my original question.

I'm wondering and I know you said it's not one-for-one, but let's say the auto market is down now 25% this year, what would that typically – well, I understand things get more complicated and you do more programming.

I mean off the top of your head, what does that do to your automotive business? Is it down 5%, 10%? Is it flat because there's more programming going on? I mean, I'm just trying to get a grasp of that..

Yeah. That kind of number wouldn't be good. I'll just put it that way. I would probably have a disproportionate impact in the capital equipment. We'd still sell adapters. We'd still sell services things like that. But the -- it's not a one-for-one correlation. And I don't know that I can give you a whole lot more detail authoritatively right now..

Okay. Last question I know I said the other one was. You said things are not falling off a cliff, but they're being affected. The quarter you just reported is, sort of, off a cliff, a small cliff, anyway relative to the year ago quarter.

Do you see this, let's call it low level of activity continuing? Or is it worse than this?.

Well, I think, from an automotive perspective, I think the electronics industry bottomed out, probably April was the bottom, just in terms of their overall impact. They're telling us, they're going to be reopening.

We've been getting supplier letters, giving us some guidance on what their ramps are, so the auto factories appear to be reopening in Europe and the United States. I understand middle of next month. So that's a good sign. And generally they closed probably the third week of March. So that would be a two-month hiatus.

So we're going to have to work through that. And they're not going to come back to 100% right away. So the range of forecast that we're looking at is extremely wide. And that's why we've taken steps to be ready, save our cash. But at the same time if it turns around quickly we want to be ready..

Well, okay. So again I'll try to pin you down a little and you can try to unpin yourself..

Our next question will come from Mike Donovan, Private Investor. Please go ahead..

Thank you. Good afternoon, Anthony and Joel. I trust you and your families or safe. I'm a longtime shareholder. My question is around, I think a SentriX specifically.

And it has felt like over time or at least at the outset that the picture around SentriX was one of a machine centric, some reconfiguring going on, some relationships developed with the semiconductor companies in terms of provisioning, and then a little -- a different business model, not a little bit of a different business model, a very different business model in terms of pricing per unit versus the CapEx.

In some of the recent documents I've read, I read this term security deployment as a service. I also follow some of the headcount and the personnel, the advertisements you have for skill sets that you're looking to hire.

And I guess by trying to jump to the end, my sense is you've learned a lot about the needs for security in the marketplace and your strategy and your execution approach is shifting.

Would that be a correct assessment on my part? And if so, what can you share about what you're seeing in terms of what customers actually need beyond the equipment?.

Well, I think, you raised some good points there. And remember as we learn our positioning the market gets refined we have a very strong Head of Marketing and Business development, Michael Tidwell who brings more of a software frame of mind to the table. And so he's been able to adjust our product positioning accordingly.

To get to the basics what we talked about last quarter was the need to have what we call simplify and scale. The premise that people need security, I think, is being more and more understood at a slow pace, okay, admittedly but people are getting with the program on security.

The big challenge is how do they want to do it? And what can they afford? And what's the type of customer profile that we can best support. And what we've discovered is customers want the whole security process end-to-end to be simplified. We don't control that entire process.

We work with a number of partners and with the whole goal of being to simplify it. And I'd be happy to walk you through the 100 or so parameters you could decide to change on a fully configured secure element and it would take us a month to figure out what you wanted to do on that.

Or you could simply say, I want to onboard this device to the cloud when it turns on or I want to authenticate it when it turns on and make sure that I can manage software updates in a secure manner.

And so what we're trying to do is explain to customers as well if that's what you want then picked this pre-configured option over here or we've got a use case for you or a profile that might make more sense.

And so we've begun the process of educating customers on -- and hopefully speaking their language is a little bit better than we have in the past. And that's really what I think you're seeing on SentriX..

And SentriX falls underneath this 18% of revenues when you look at a portfolio split between CapEx and adapters and software..

That's correct..

Thank you. .

Thank you, Mike..

Our next question will come from Avi Fisher with Long Cast Advisers. Please go ahead. .

Hi. Thank you for taking question.

I'm sorry to mention this how many SentriX units are deployed?.

We still have five deployed Avi..

Okay, five.

And are you offering any onetime discounts or financing options?.

No. It's an interesting point. We're really trying to be frugal with our cash right now. If I thought we're going to go jump in and out of a V-shaped or section or something I might get more aggressive on something like that. We're going to choose to keep our powder dry at least for a little while..

Awesome. And one last question. This is our third straight quarter of growing consumables revenue. And I'm just trying to understand what takeaway to read from that. It seems like, I know, SentriX is in that line item, but I'm not sure that's material yet. I know it reflects capacity utilization by some of your customers.

Is there anything you can offer to help understand this sort of positive trend?.

Yes. It's a positive trend. But I would caution you not to draw too much or infer too much. We're in crazy times right now. And as I've indicated before the numbers in any one quarter can bounce around. It's clearly a trend we want. We want the recurring revenue to go up. That's part of the business strategy behind SentriX.

And obviously, SentriX is contributing to that. But the -- what I'm saying is don't read too much too fast..

Is it growing because of SentriX? Or is it probably just because your customers are using programming a little bit more and using more of your product?.

I think it's growing because as a percentage remember the CapEx has gone down as well..

The other thing that clouds that a little bit was we had a very rough Q3 in terms of our business levels. And you saw that that's been recovering since then..

Correct.

So that's a growing use of -- but that's a growth -- does that mean your customers have worked off the excess inventory they had?.

I think it -- what I'm saying Avi is, don't draw too many conclusions over the last three quarters..

Fair enough. And yes, it's coming off of a very low base as well which I'm aware of. But I appreciate the color..

You’re welcome..

At this time, I'm showing no more questions in the question queue. This will conclude our question-and-answer session. I would like to hand the conference back over to Anthony Ambrose for any closing remarks..

Thank you very much, Grant. As there are no further questions, I'd like to close the call by thanking everyone for their participation today.

I'd also like to remind everyone to vote electronically in the upcoming shareholder meeting May 18, Joel?.

May 18..

May 18. And I hope everyone remains safe and productive. Thank you very much..

The conference has now concluded. Thank you for attending today's presentation. You may now disconnect..