Hello and welcome to the Astec Industries Inc. Fourth Quarter 2020 Earnings Call. As a reminder this conference call is being recorded. It is my pleasure to introduce your host Steve Anderson, Senior Vice President of Administration and Investor Relations. Thank you, Mr. Anderson. You may begin..

Thank you, and welcome to the Astec Industries fourth quarter 2020 earnings conference call. My name is Steve Anderson and joining me on today's call are Barry Ruffalo, our Chief Executive Officer and Becky Weinberg, our Chief Financial Officer. In just a moment, I'll turn the call over to Barry to provide comments.

And then Becky will summarize our financial results. Before we begin, I'll remind you that our discussion this morning may contain forward-looking statements that relate to the future performance of the company, and these statements are intended to qualify for the Safe Harbor liability established by the Private Securities Litigation Reform Act.

Any such statements are not guarantees of future performance and are subject to certain risks, uncertainties and assumptions. Factors that could influence our results are highlighted in today's financial news release, and others that are contained in our filings with the SEC. As usual, we ask that you familiarize yourself with those factors.

In an effort to provide investors with additional information regarding the company's results, the company refers to various GAAP, which are US generally accepted accounting principles and non-GAAP financial measures, which management believes provide useful information to investors.

These non-GAAP financial measures have no standardized meaning prescribed by US GAAP, and are therefore unlikely to be comparable to the calculation of similar measures for other companies. Management of the company does not intend these items to be considered in isolation or as a substitute for related GAAP measures.

Management of the company uses both GAAP and non-GAAP financial measures to establish internal budgets and targets to evaluate the company's financial performance against such budgets and targets.

You should also note, comments made during today's call will refer to non-GAAP results and a reconciliation of GAAP to non-GAAP results are included in our news release and in the appendix of our presentation. All related earnings materials are posted on our website at www.astecindustries.com. And now I'll turn the call over to Barry..

simplify focus and grow the business. The fourth quarter marked another period of strong execution and performance with a 69% increase in adjusted EBITDA and a 490 basis point expansion in adjusted EBITDA margin despite a decrease in sales.

2020 was a remarkable year for our organization and I know that we will continue to build upon the strong foundation as we continue to execute our strategy and drive commercial and operational excellence and growth across the organization. With that, I will now turn the call over to Becky to discuss our detailed financial results..

Thank you, Barry and good morning everyone. I am pleased to join you on today's call. Starting on slide 10, fourth quarter adjusted revenues decreased 15.6% to $238.9 million compared to the prior year quarter. Equipment sales decreased 14.7%, while parts sales increased 10.3%.

Our backlog increased 36.7% to $360.5 million at quarter end driven by higher materials solutions and infrastructure solutions orders which increased 92% and 15.1% respectively. Higher materials solutions and infrastructure solutions orders were driven by improved customer demand.

Fourth quarter adjusted EBITDA increased 68.8% to $23.3 million compared to $13.8 million in the prior year period and adjusted EBITDA margin improved 490 basis points to 9.8% compared to the prior year period. The margin improvement was driven by favorable mix and our ongoing transformation initiatives.

Adjusted SG&A expenses decreased 21.5%, driven by reductions in consulting fees travel and employee expenses. Adjusted earnings per share rose 55.6% in the quarter to $0.56 compared to $0.36 in the fourth quarter of 2019, driven by our business formation savings.

Fourth quarter 2020 GAAP earnings per share of $0.67 included an $0.11 benefit from transformation-related savings. Overall, we reported strong fourth quarter results despite the challenging economic environment as we continued to execute against our transformation strategy.

Turning to slide 11, we highlight the key drivers of year-over-year adjusted EBITDA margin expansion. Adjusted EBITDA margin expansion of 490 basis points was primarily driven by reduction in headcount and related savings in addition to savings from supply chain management and other transformation savings.

Moving onto slide 12, our infrastructure solutions business revenue decreased by 12.6% to $167.2 million in the quarter driven primarily by a slowdown connected to our industrial products.

Adjusted gross profit decreased 3.7% to $39.5 million and gross margin expanded 220 basis points to 23.6%, driven by strong parts margins, particularly in asphalt plant equipment. We continued to show improved quality of earnings during the fourth quarter, driven by rightsizing pricing initiatives, plant efficiencies, and controlled spending.

We remain focused on commercial and operational excellence to drive efficiencies across the business and we'll continue to limit discretionary spending going forward. Positively the BMH Systems and CON-E-CO acquisitions have been fully integrated and are performing above our initial expectations.

We remain well-positioned to support our customers as we continue to see solid demand for highway and rolled building construction products across the country. As Barry mentioned, we are seeing strong government support for infrastructure spending, which would provide a strong catalyst for the industry.

On Slide 13, our Material Solutions business revenues decreased 22.1% to $71.7 million compared to the same period a year ago.

Adjusted gross profit increased 2.3% to $17.7 million, while gross margin expanded by 590 basis points to 24.7% driven by rightsizing initiatives taken in 2019 and 2020 to maximize utilization of our manufacturing footprint capacity improving margin despite declining revenue.

During the quarter we also saw additional earnings improvement from controlled spending. We continue to make progress on our materials solutions transformation plan and have efforts underway to the leverage our global footprint for deliveries to end-customers.

As I mentioned last quarter, we completed the closure of our Mequon, Wisconsin facility and the operations have been moved to other asset sites. As a reminder, this is in line with our ongoing strategy to optimize our overall manufacturing footprint and manufacture closer to our global customers.

Overall, improved earnings performance in the fourth demonstrates the traction of our initiatives to right-size operations to market demand. Exiting the fourth quarter, we continued to see strong domestic and international order intake for materials solutions products.

On Slides 14 and 15, we summarize the drivers of our full year 2020 results versus 2019. Overall, we achieved 220 basis points of year-over-year gross margin improvement despite a decline in net sales. Turning to Slide 16, we continue to maintain a strong balance sheet with minimal debt and a net cash position of over $158 million.

We remain focused on strong liquidity and cash preservations to withstand sustained periods of market uncertainty. Of note, operating activities were approximately a $142 million source of cash in 2020 driven primarily by cash provided by net income after non-cash items of $93.6 million and inventory reduction of $44.7 million.

We continue to invest in organic growth and strategic M&A, while paying dividends. Overall, we have available liquidity in excess of $312 million with only $2 million in total debt as of December 31, 2020. Now on Slide 17, just a reminder on our capital deployment framework which is consistent with what we have previously shared.

We continue to have a disciplined approach to deploying our capital. When we consider the various avenues of capital deployment, we do so in the context of our long-term strategic objectives and related revenue, earnings and cash flows in order to maximize shareholder value.

Our capital allocation priorities remain unchanged in the current environment. On internal investments in property, plant and equipment, we will continue to target greater than 14% return on invested capital for new investments.

Regarding acquisitions, we are only considering strategic acquisitions that align with our growth strategy and meet our internal financial criteria. Our strategy for M&A is to seek the opportunities where we can build upon our strong positions in the Rock to Road value chains.

We intend to use strategic acquisitions to maintain and strengthen our market-leading positions as we add-on products, talent and capabilities. We believe that M&A is a mechanism that will potentially allow us to accelerate our investments in technology and innovations.

As a reminder on Slide 18, we summarize our strategic and disciplined approach to M&A, which helps to support our grow pillar. Finally, as Barry mentioned in his discussion on governance, during the fourth quarter we fully remediated all prior period material weaknesses a full year ahead of schedule.

During the past 12 months, our team has worked diligently to develop and execute our remediation plan. I am extremely proud of what we have accomplished and we now have a stronger organization with the appropriate controls and measures in place. With that, I will now turn it back over to Barry for his close comments..

simplify, focus and grow. First, simplify. The fourth quarter marked another period of successful execution on our strategy to leverage our scale, reduce organizational complexity and rationalize our footprint and product portfolio. I am proud of the progress our team has made to simplify our business to drive efficiencies across the portfolio.

Second, focus. We continue to strengthen our customer-centric approach, driving commercial excellence and streamlining processes and instilling a performance-based culture. Finally, grow.

We are reinvigorating innovation, leveraging technology to unlock internal synergies, while also enhancing the customer experience exploring global growth opportunities and carefully allocating capital to maximize shareholder value. In 2021, our organization is well positioned to capitalize on global growth opportunities.

We made great progress in 2020 within these three pillars, especially given the challenging pandemic environment. I am confident that, our team will continue to build upon our success in 2021. Slide 20 outlines some of our major milestones, we are executing again on our transformational journey and the progress we have made to date.

During 2020, we have made significant progress under our simplify pillar as we work to consolidate our footprint and streamline our portfolio. The fourth quarter marked a pivot point for our strategic transformation, as we will now shift more energy and effort on the focus and grow pillars in 2021.

Under focus, during our December Investor Day, we introduced the OneASTEC business model for continuous improvement, and continued to gain strong traction on our commercial and operational excellence initiatives across the organization.

We will – we also made significant progress on our product rationalization initiatives, as we streamline the portfolio to align with our Rock to Road value chain. Under grow we brought on Grathwol Automation during the fourth quarter, a strategic acquisition that supports our technology leadership vision to provide value-added solutions.

We remain focused on providing our customers industry-leading technology solutions and we are confident that our efforts related to innovation and technology particularly telematics will support future organic growth across the business.

The actions that we have taken under our transformation strategy have and will continue to result significant cost savings for our organization. With the expected savings, we plan to reinvest in our business to drive profitable growth and maximize shareholder value.

I'll conclude on slide 21, with our key investment highlights, which remains consistent. In the midst of the economic challenges faced in 2020, our team continued to execute and make great progress with respect to our efforts to simplify, focus and grow the business.

This year was a testament to our dedication and ability to perform well throughout cycles as we increased margins, despite the decline in revenue. We have significantly strengthened our position in this year, and are well positioned for future growth with a streamlined organization and a strong balance sheet and ample liquidity.

In 2021, we remain well positioned to capture industry growth opportunities for their superior customer service, leadership positions with an attractive niche markets, and a culture of continuous improvement.

We have a strong leadership team, leading our organization through this next phase of growth, and I am confident that we will see continued positive momentum. I am extremely excited for the future of our organization, as we enter into the next chapter of our journey. With that, operator we're now ready to open up the call for any questions..

Thank you. At this time, we will be conducting a question-and-answer session. [Operator Instructions] Our first question from the line of Mig Dobre with Robert W. Baird. Please proceed with your question..

Thank you. Good morning, Barry, Becky, and Steve. I guess, the first question for me, maybe we can talk a little bit about your slide 15 the 2020 adjusted EBITDA margin bridge.

I'm sort of curious, if you can help us understand, which one of these buckets has any element of cost savings that you think might be temporary in nature or reaction basically to the pandemic that could potentially reverse in 2021? Maybe we can start there..

Sure. Hi Mig, good morning. The first piece of it is on the headcount-related savings. We showed 110 basis points improvement, and a lot of that was tied to incentives, which we hope not to repeat, but it's a factor of our sales being down almost 11% on a full year basis. So obviously, that impacted incentives. So there was an adjustment in the quarter.

But we do expect round about 20 basis points to stick of that savings. Supply chain -- the supply chain savings should stick, but we are seeing some pressure from steel that's definitely up year-over-year. We're seeing in Q1 roughly 77% increase on steel. So we're managing our way through that.

So -- but there might be some deterioration there just due to that. But the other transformation savings also should stick and then we'll see some more expenses for corporate going forward, as we roll out our systems and focus on innovation versus product rationalization..

I see.

So just to clarify here, you're saying that incentive comp could be 90 basis points headwind in 2021?.

Yes. Mig, you got cut off there for a second.

Can you repeat that question please?.

Sorry about that. I want to make sure that I understand this.

You're saying that incentive comp could be a 90 basis point headwind in 2021, normalizing incentive comp that is?.

Not on a full year, no. On a full year, we expect it to be fairly flat overall. But -- I'm sorry and I was talking to the quarter, not the full year. So I apologize for that. It was just an adjustment in the quarter..

Okay. But again I'm talking about the full year. So slide 15, if we're looking at these buckets, it sounds like incentive comp is going to be flat for the full year. Then the only headwind you're going to have is related to material cost.

Is there a way for us to understand the magnitude of the headwind based on what you know today, right? Current pricing and the way you've scheduled your purchasing?.

Yes. So, I'll take a shot at that Mig. This is Barry. Good morning. So maybe another way to look at it is, we've seen steel actually go up 77% on a year-over-year basis at this point in time of 2021. We have taken pricing initiatives to the tune of about 5% across the board.

And we see steel today being roughly about just under 20% of our total cost with everything all in. And so that's probably the amount of detail that we give you. I think that, we continue to meet regularly to talk about how do we pull the levers, relative to our steel buys and to try and understand what that means from a material margins perspective.

And certainly, we like to think that we're buying better than what the spot price is actually realizing. But we certainly do -- we take price initiatives based on spot price more than we do on what we buy.

So with all that being said, we think that steel could have an impact on our material margins because as you know Mig, when it goes up as quickly as it has, it's tough to keep up with it. And we're not afraid of steel going up gradually and slowly. But when it spikes like this, there is some pressure.

So, we're going to have to manage through that as we move through 2021 as effectively as possible..

Understood. Maybe moving away from raw materials and just asking a pure SG&A question. In 2020 your SG&A declined on an adjusted basis I think a little north of $20 million. Is there -- I mean you've invested a lot as you said you remedied some of these material weaknesses which I know was not an inexpensive task.

I'm curious as to how you think about SG&A going forward.

Do you think the current run rates are sustainable in 2021 or to Becky's point earlier, should we factor-in some level of inflation?.

Yes, hi Mig, I can take a stab at that. So certainly, there are several puts and takes on SG&A. However, we do expect the dollars to be up slightly year-over-year. So you're right. Certainly the remediation costs were significant but that will go away and we are deploying our Oracle, which pretty much offsets it.

So just basically we think we'll be flat to slightly up..

Yeah. And some other things that will actually drive it to a little bit higher than what we had in 2020 is spend on engineering and innovation. That's an area where we've underinvested for a while and we want to continue to drive that in order to really be a market leader on the products and solutions that we provide.

And we do expect to have some level of travel come back in 2021, which will be a greater spend than in 2020 but not as high as it was in 2019..

Understood. Final question for me, I'm curious where you are right now in terms of capacity utilization. I guess, maybe asking a question from a hypothetical standpoint here, let's just say that demand expands 20% from current levels.

Do you have the capacity currently to convert on that opportunity, or would that require either additional CapEx or additions to footprint in general capacity?.

Yeah. So Mig this is Barry. I'll just tell you that our constraint right now relative to capacity is really manpower. We do not believe that we have to increase anything around brick-and-mortar.

Obviously as you know we've taken action to try and reduce our footprint capacity, but we're confident that with the improvements that we've started to already see in our operational excellence initiatives that we should be able to achieve any type of -- any additional spike in demand with the brick-and-mortar that we have today.

Obviously in 2020, we only spent I think around $15 million in CapEx, which is lower than what we wanted it to be.

And so as we start to beef-up our operational excellence initiatives, obviously, we want to invest in creativity over capital first, but we know that there's things that we can do more of relative to automation and efficiencies through more capital expenditure.

And so we've worked very closely and continue to work closely with our manufacturing engineering and operational people in order to really identify those areas of opportunity that will help us with the demand we see today but with additional demand that we see in the future..

I don't know if this is how you look at the business Barry, but I'm curious if you can help us understand. With the current footprint and what you have in place, what revenue base do you think the business can support? Are we talking something 25% higher, 50%? I mean how should we think about that? That's my final question. Thank you..

Yes. Thanks Mig. We aren't going to give that type of detail but we can certainly -- we feel comfortable with the reductions that we made in the footprint that, obviously, we could sustain our recent historical highs plus some more.

And, obviously, with the operational excellence initiatives we have going on, we believe that there's opportunity to plow more material and more products through our facilities than we have ever and so we're going to continue to invest in that.

So without giving you exact answer Mig, we feel comfortable that we've got quite a bit of room of expansion in capacity than what we've experienced in recent history even with less facilities..

Understood. Thank you for the color..

Yeah. Thanks Mig..

Thank you. Our next question comes from the line of Stanley Elliott with Stifel. Please proceed with your question..

Hi, good morning, everyone. Thank you all for taking the question. Very nice work in the backlog.

Can you talk anything about maybe anything product specific? And then with the big jump we saw in the materials solutions, curious if there was something happening within the channel in terms of some of the rent-to-own customers are actually needing to refleet or restock or how you would think about that? But just curious about the dynamics within that backlog?.

Okay. Good morning, Stanley this is Barry. Thanks for the question. Yeah, I would tell you this that if you look at 2019 and most of 2020, our customers had record years. Really even with the pandemic most of our customers had a record year in 2020 on top of a record year in 2019.

When you look at the demand that's flowed through our business, it hasn't really matched their performance.

And so, therefore, when you take that into consideration, when you also take into consideration that at the end of 2019 and into 2020 early days, we put a big effort into trying to rightsize our dealer inventories, we rightsized our finished goods inventories and through that timeframe, we saw the rental duration increase.

And so people weren't converting them into retail sales. As we got through 2020 and really into the last -- beginning of the last quarter, we do an annual order writing period or a program at that point in time. And we saw a record number of -- a record revenue level actually come through in that program.

And I think that just shows that there's a little bit of catch-up in regards to the demand relative to what the dealers are seeing, what we see from a customer perspective. And so therefore, as we talked about some of the early drivers as we move into 2021 there's some positive aspects there.

Now certainly, I'd preface everything we're still in a pandemic and you never know what's going to happen there. But when you look at what the states have done in early January around gas tax. The miles are starting to come back on driven miles, which helps that as well. The renewal of the FAST Act, which has already happened.

There's been some other smaller supplemental bills passed as we stay close to our colleagues in D.C. There's been a lot of positive conversations around a longer-term infrastructure build. So we feel good that obviously, we're close to the market relative to our inventories. Our dealers are starting to restock.

We're seeing that flip over even now quicker to retails from a conversion perspective from rentals. So I think that's what's really driven the Materials Solutions piece as a lot of those different elements put together. .

That's great. And maybe if you could also kind of talk a little bit about some of the technology uptake that you're talking, maybe even some things beyond telematics.

And then curious if that has makes you think that maybe parts and services could ultimately be a higher percentage of the revenue mix whatever this cycle is going to end up looking like?.

Yes. So a couple of pieces to that. You're absolutely right.

And so not just on top of telematics, but as we look at the Rock to Road value chain, as we talked about in the Investor Day in December, we're in the works of starting to build a platform in which our customers have really -- in many cases 30% of our customers have a value chain where they have quarries, they have plants and they have rope construction crews.

And so giving them a chance to actually use one platform to see all of their equipment and understand how to manage that internal supply chain more effectively we see a benefit there. And yes, that absolutely will give us a tighter connection into service and parts related types opportunities.

We've been typically running between 25% and 30% of our sales being from parts and we think there's a huge opportunity to make that a bigger portion of our revenue. On top of the technology, we've also changed the structure of our leadership team.

And so now we actually have someone who reports to me that is directly accountable for our strategy around parts sales as the overall company versus having someone individually for groups or sites. And so we think that with that type of a focus that will also help improve our parts sales. .

Perfect, guys. That’s it for me. Thank you. Best of luck..

Thank you..

Thank you. [Operator Instructions] Our next question comes from the line of Steve Ferazani with Sidoti. Please proceed with your question..

Hi. Good morning, everyone. I wanted to ask about you noted the acquisitions perhaps outperforming your expectations so far and then the bigger contribution from aftermarket this quarter.

Can you give any kind of sense of how much the bigger aftermarket piece and the acquisitions contributed to your gross margin?.

Yes. I would -- we haven't given the detail on the acquisitions, Steve. And by the way, it's nice to meet you and nice to talk to you. Look forward to meeting you in-person in a few days. .

Absolutely. .

When we completed the two concrete plant acquisitions, we alluded to the fact that on a full year basis, they would typically realize about $55 million in sales and they would be immediately accretive to our overall company's performance.

And I can tell you that on an annualized basis, we already are seeing that if we projected forward that they're going to be a greater contributor to our revenue than what they've already what we quoted in the -- when we actually closed the two acquisitions. And we've found a lot of synergies relative to procurement.

And so we expect on the margin side, they'll continue to be accretive as well. So without giving you the details since we haven't and we're not going to, I just wanted to let you know that relative to those statements that we made at the closing, they're in good shape..

Okay. And then, as we've gotten through earnings season, certainly, a few weeks ago, it was all about steel prices. But as we've gotten further along, some companies have certainly sounded -- I don't want to say sounded the alarm, but increasing concerns on supply chain, whether it be shipping containers, accessing components.

Have you seen a shift over the last month? And at this point, would you say there's rising concern or no?.

Yes. I would say that, to-date we haven't seen -- it hasn't affected us too negatively Steve. I would tell you that, we do see it as a risk and therefore we stay on top of it and we have many conversations and we've done several things as far as deepening our supply chain and having the redundancies, making sure we're looking at our inventories.

So we're doing -- I feel comfortable, we're doing the right things to protect us to getting too exposed to those risks. But as you and I both know, whether it's the cost of container or the availability of a container, those are all things that could have an impact on us as we move forward. So we'll stay very close to that.

We have seen in maybe one of our sites in South Africa. We've seen a little bit of an impact. But I'd say, on an overall basis to the company, it's not really material at this point in time and we're continuing to work our way through that.

So we feel good that we've done a great job of managing our supply chain and our procurement through the pandemic and I think it ultimately, is going to continue to make us sharper as we move forward to ensure that we're not exposed to any risk..

And then, last one for me. During the Investor Day you sort of ran through some of the new international products that you figured that are aligned with demand from international markets.

Can you talk a little bit about traction in terms of introducing some of those new products the low -- say, lower-priced mobile plants, et cetera?.

Yes. So we've made great traction there. I would say that on some of those product lines we're just getting to the launch phase with the prototypes. We've seen great acceptance and excitement around us launching them. So some of our first units are already sold into international markets, which is great.

Obviously, as you and I both know, a lot of times when you introduce something that you think is just for international, you also find that it could be of use and have an application in the domestic market.

But when you look at -- if I were to show you today our roadmap relative to new product development, there's a fair share of those products that are really focused on the international market, which in some cases, we don't really participate at all.

And so, we're doing that by, obviously, understanding the specifications, understanding our competitive position, understanding the footprint and so, what I think has really been great, as you look at some of our spike in the backlog, is it's also supported our -- or maybe accelerated our movement to use the footprint that we have today, whether that's Northern Ireland, whether that's Brazil, our site in Johannesburg.

We're trying to find ways to look at all the capacity, all the landed costs and improve our position relative to supply and margins through the whole situation also continue to look at outsourcing initiatives. In the past, we have been very vertically integrated.

And if you walk through one of our facilities, maybe versus our competition that may be more assembly, we've been very vertically integrated.

So we're looking at what is the mix, how do we use our capacity and our square footage more effectively in the future to ensure that we're doing things that really add value from our perspective versus things that we can get from someone else through a global supply chain..

Thank you. [Operator Instructions] Our next question comes from the line of Larry De Maria with William Blair. Please proceed with your question..

Okay. Hi, thanks. Good morning, everybody. Hey, Larry..

Hey, guys. I just want to clarify some of the comments earlier around material cost. In doing the math right, the 5% increase in price doesn't really offset a 77% increase in steel.

So, could we just cut down to like how much of a headwind do we expect on an annual basis? And how protected hedged material costs are we now? And when did the price increase going?.

Yes. So the price increases have already been put in place Larry, and that's not an average. So I would say that in areas where we have a bigger content of steel, we probably have done more. We won't go into all those details here.

But I would tell you that we've done a good job of protecting our material or steel buys, certainly through first quarter in the second quarter. And I feel confident that we have a team of people, including myself, to look at this on a regular basis since it is an important part of our cost structure to ensure that we're on top of it.

We're not saying there's not any exposure. We're not going to I think identify what that dollar value of exposure is today on this call. But I just want to give you a rest assured that we're on top of it. We're looking at it.

And we're doing that where we can to minimize it in some cases maybe even take advantage of it as we've done a good buy and we can pass some of that spot price increase to the customers..

Okay. So, we're fairly protected on the near-term, and obviously could be flexible with price, et cetera, as the year goes on. And so far, price increases have held obviously. It sounds like ....

Larry, let me just give you a little bit more color maybe. So in the past we've talked about our backlog lasting a quarter or so. With the backlog increase that we've seen here over Q4, we're a little bit further out than a quarter.

So I just want to give you some perspective that we do have some exposure past the quarter on some of those material price increases, but we're doing everything we can to manage it..

Okay. Thank you. And then, the second question was around backlog. What kind of backlogs did the customers have now that FAST has been renewed and we're post-election, et cetera? And curious, how they've changed and how your backlog has changed in 2021 so far obviously finished 2020 on a strong note..

Yes. So as I spent a lot of time talking to customers and stay close to the market Larry, I can tell you that most of the customers I talk to have a full book of work for 2021 and they're already starting to book projects into 2022. So their backlog is very strong.

I would tell you that from a quality as they quoted projects in one project through the back half of 2020 to some of the margins that they would see in that backlog starts to get a little bit compressed as you go through the year 2021, if that helps you a little bit. But generally, I think they're in pretty good shape.

I would say that as we've moved from 2020 where we did see a spike in backlog, we've been pleased with some of the order activity and certainly quoting and order activity that we've seen in early days of 2021..

Okay. Thank you very much. Good luck, guys..

Thank you..

Thank you. Ladies and gentlemen, this concludes our question-and-answer session. I'll turn the floor back to Mr. Anderson for any final comments..

All right. Thank you, Melissa. Again, we appreciate your participation on this conference call. Thank you for your interest in Astec. As today's news release indicates, today's call has been recorded. A replay of the conference call will be available through March 15, 2021.

The transcript will be available under the Investor Relations section of the Astec Industries website within the next five business days. All of that information is contained in the news release that was sent out this morning. Again, this concludes our call.

So thank you all for your time and attention, and be glad to connect with you as the week goes on. Thank you very much..

Thank you. This concludes today's conference. You may disconnect your lines at this time. Thank you for your participation..